{"effective_time":"20180821","how_supplied":["HOW SUPPLIED: Dispenser carton containing 100 or 300 strips."],"id":"73fc765a-b7a3-5ea4-e053-2a91aa0a3014","indications_and_usage":["INDICATIONS: For staining the anterior segment of the eye when fitting contact lenses, in disclosing corneal injury and in applanation tonometry.","DIRECTIONS FOR USE: To insure full fluorescence and patient comfort, the BioGlo impregnated tip should be moistened before application. One or two drops of sterile irrigating or saline solution should be used for this purpose. Touch conjunctiva or fornix as required with moistened tip. It is recommended that the patient blink several times after application. 1. Hold package in middle and tear down toward sterile strip 2. Turn over and tear down from other side, taking care not to tear the sterile strip. 3. Grasp each end of package firmly as shown, without touching the sterile strip, and pull apart. HUB_BioGlo Instructions For Opening Strips"],"openfda":{},"package_label_principal_display_panel":["DRUG: BioGlo GENERIC: Fluorescein Sodium DOSAGE: STRIP ADMINSTRATION: OPHTHALMIC NDC: 52125-998-20 PACKAGING: 100 in 1 BOX ACTIVE INGREDIENT(S): FLUORESCEIN SODIUM 1mg in 1mg INACTIVE INGREDIENT(S): Remedy_Label"],"set_id":"7ddca6b6-ce58-4c05-a71b-b7c62519ab95","spl_product_data_elements":["BioGlo Fluorescein Sodium FLUORESCEIN SODIUM FLUORESCEIN"],"spl_unclassified_section":["Product Facts Each sterile strip is impregnated with 1 mg. of fluorescein sodium U.S.P.","NOTE: For external use only. Contents may not be sterile if individual strips have been damaged or previously opened.","HUB Pharmaceuticals, LLC Rancho Cucamonga, CA 91730 www.hubrx.com Mfr. Lic. No. G/1197 European Representative: Biovision Limited Wayside, Tring Road, Wellhead, Dunstable, BEDS LU6 2JU, UK"],"storage_and_handling":["STORAGE: Keep at room temperature."],"version":"3"}