The DIO SM Implant System is comprised of dental implant, Superstructure, Instruments for prosthetics and Surgical InstrumentsThe DIO SM Implant System is specially designed for use in dental implant surgery. A successfully osseointegrated implant will achieve a firm implant when surgically implanted under controlled conditions, per well known clinical studies. There are intended for use in partially or fully edentulous mandibles and maxillae, in support of single or multiple-unit restorations.The superstructures consist or screws(Closing Screw, Coping Screw), abutments (Screw retained type, Cemented retainde type, Overdenture retainde type), Solid protect cap.The screws are made of commercial pure titanium, grade 4(ASTM F76) and Ti-6A1-4VELI(ASTM F136) intended to be usedin a narrow tooth gap after implant insertion and to protect exposed top of commercial pure titanium, grade 3 and grade 4(ASTM F76), Ti-6A1-4VELI(ASTM F136), white gold alloy, POM, PMMA. The intentions of each abutment are described in part 2.4. The protect cap is made of POM and intended to protect infecting other substances after solid abutment is fixed on the implant.
A sterile device made of alloplastic materials [e.g., titanium (Ti), stainless steel, ceramic] intended to be surgically implanted into alveolar and/or basal bone of the mandible or maxilla to provide support and a means of retention for a dental prosthesis (e.g., bridge, single-tooth, overdenture). It is a two-piece device composed of an anchorage component (implant body) in the form of a threaded screw that is implanted into bone, and a retention component (implant abutment), typically attached to the anchorage component after implantation, that protrudes through gingival tissues to support the prosthesis.
dioimplantusa.com