COBAS 6000 CORE 05036453001

MAUDE Adverse Event Report

MAUDE data represents reports of adverse events involving medical devices. This maude entry was filed from a 05,06 report with the FDA on 2011-10-13 for COBAS 6000 CORE 05036453001 manufactured by Roche Diagnostics.

Event Text Entries

[17099430] The customer received a questionable c-reactive protein gen. 3 (crp) result on their c501 analyzer. All tests were performed on the same c501 analyzer using serum samples. The patient's initial crp result was 9. 9 mg/dl accompanied by a data flag. The initial result was auto-verified by the lis and released to the physician. The customer called the physician and instructed them there might be a problem with the result because the serum indices associated with the test were flagged. The customer advised the physician not to do anything with the crp result until they investigate. The customer repeated the patient's sample and the result was 4. 4 mg/dl accompanied by a data flag. This repeat result was auto-verified and released from the laboratory. The customer repeated the sample for a third time and the result was 4. 4 mg/dl accompanied by a data flag. The customer believed the repeat result of 4. 4 mg/dl to be correct. The patient was not treated based on the erroneous result. There were no adverse affects from this event. The crp reagent lot number was 64881401 and the expiration date was 11/30/2011. The customer declined a service visit.
Patient Sequence No: 1, Text Type: D, B5


[17406411] .
Patient Sequence No: 1, Text Type: N, H10


[20206721] A specific root cause could not be identified as the reaction kinetics were not available for further investigation. Based upon information provided, the initial crp result was accompanied by a data flag notifying the user the result was high, outside of the reference range set for the assay. The serum indices for the same sample were flagged with a sample flag, which is triggered by the clot sensor. The sample clot sensor works by comparing the pressure to a known value; if it is exceeded an alarm is issued. In this case an alarm was issued. It seems that the clot causing the alarm stuck to the sample needle and was transported to the cuvette when the crp measurement took place leading to the high initial result. After the clot was removed, the re- runs generated correct results. This assumption could not be confirmed because the reaction kinetics were not available for investigation. No adverse events were reported.
Patient Sequence No: 1, Text Type: N, H10


MAUDE Entry Details

Report Number1823260-2011-05379
MDR Report Key2292697
Report Source05,06
Date Received2011-10-13
Date of Report2012-03-09
Date of Event2011-09-24
Date Mfgr Received2011-09-26
Date Added to Maude2011-10-13
Event Key0
Report Source CodeManufacturer report
Manufacturer LinkY
Number of Patients in Event0
Adverse Event Flag3
Product Problem Flag3
Reprocessed and Reused Flag3
Health Professional3
Initial Report to FDA3
Report to FDA0
Event Location3
Manufacturer ContactNA JENNIFER WOLFGRAM
Manufacturer Street9115 HAGUE ROAD NA
Manufacturer CityINDIANAPOLIS IN 46250
Manufacturer CountryUS
Manufacturer Postal46250
Manufacturer Phone3175217008
Manufacturer G1HITACHI HIGH TECH CORP.
Manufacturer Street882 ICHIGE HITACHINAKA NA
Manufacturer CityIBARAKI 312-8504
Manufacturer Postal Code312-8504
Single Use3
Previous Use Code3
Removal Correction NumberNA
Event Type3
Type of Report3

Device Details

Brand NameCOBAS 6000 CORE
Generic NameCLINICAL CHEMISTRY ANALYZER
Product CodeDCN
Date Received2011-10-13
Model NumberNA
Catalog Number05036453001
Lot NumberNA
ID NumberNA
OperatorHEALTH PROFESSIONAL
Device AvailabilityY
Device AgeDA
Device Eval'ed by MfgrR
Device Sequence No1
Device Event Key0
ManufacturerROCHE DIAGNOSTICS
Manufacturer Address9115 HAGUE ROAD NA INDIANAPOLIS IN 46250 US 46250


Patients

Patient NumberTreatmentOutcomeDate
10 2011-10-13

© 2024 FDA.report
This site is not affiliated with or endorsed by the FDA.