COULTER GEN-S SYSTEM 6605381

MAUDE Adverse Event Report

MAUDE data represents reports of adverse events involving medical devices. This maude entry was filed from a 01,05,06 report with the FDA on 2011-10-14 for COULTER GEN-S SYSTEM 6605381 manufactured by Beckman Coulter, Inc..

Event Text Entries

[2337586] The customer contacted beckman coulter, inc (bec) to report that the presence of blasts in a pt sample was erroneously not flagged when analyzed on their coulter gen-s system. The erroneous pt sample results were reported out of the lab. There was no impact to pt treatment associated with this event. Several samples from the pt were drawn and assayed over a period of several days on two different analyzers in the lab. The customer reported that qc (qc) samples were assayed prior to the event and all results had recovered within the lab's established ranges. A manual differential was performed which detected the presence of blasts. An amended report was generated and reported outside of the lab.
Patient Sequence No: 1, Text Type: D, B5


[9382700] Beckman coulter, inc does not claim to identify every abnormality in all samples. Beckman coulter, inc suggests using all available flagging options to optimize the sensitivity of the instrument results. There may be situations where the presence of a rare event may fail to trigger a suspect message. A field svc engineer (fse) was dispatched to the customer's site. The fse measured offset voltages for both differentials and reticulocytes; both channels were within acceptable limits. The fse checked the latron primer and control and adjusted the position of the flowcell to reduce cvs on the scatter to less than 4. 0. The fse performed a sizing check on the red blood cell (rbc) and white blood cell (wbc) apertures. The fse adjusted the voltages/current to bring wbc values back to 94. 3 fl. The fse ran samples obtained from a reference lab, measured the volume channel for noise, and adjusted the volume of slyse in the diff mix chamber. The fse reassayed the samples and adjusted noise levels back down to approx 100 mv ac. The fse increased the diff pressure. The fse verified the repairs per established procedures. All results met published performance specs. This reportable event was identified during a retrospective review conducted between 01/01/2008 and 10/23/2010 of complaints for add'l reportable events. This mdr represents 5 of 6 reported by the customer.
Patient Sequence No: 1, Text Type: N, H10


MAUDE Entry Details

Report Number1061932-2011-01662
MDR Report Key2326211
Report Source01,05,06
Date Received2011-10-14
Date of Report2009-08-20
Date of Event2009-08-17
Date Mfgr Received2009-08-20
Device Manufacturer Date2001-10-01
Date Added to Maude2012-07-06
Event Key0
Report Source CodeManufacturer report
Manufacturer LinkY
Number of Patients in Event0
Adverse Event Flag3
Product Problem Flag3
Reprocessed and Reused Flag3
Health Professional3
Initial Report to FDA3
Report to FDA0
Event Location0
Manufacturer ContactMS NORA ZEROUNIAN
Manufacturer Street250 S KRAEMER BLVD
Manufacturer CityBREA CA 92821
Manufacturer CountryUS
Manufacturer Postal92821
Manufacturer Phone7149613634
Manufacturer G1BECKMAN COULTER, INC.
Manufacturer Street11800 SW 147TH AVE.
Manufacturer CityMIAMI FL 33196
Manufacturer CountryUS
Manufacturer Postal Code33196
Single Use3
Previous Use Code3
Event Type3
Type of Report3

Device Details

Brand NameCOULTER GEN-S SYSTEM
Product CodeGKL
Date Received2011-10-14
Model NumberNA
Catalog Number6605381
Lot NumberNA
ID NumberNA
OperatorHEALTH PROFESSIONAL
Device AvailabilityY
Device AgeDA
Device Eval'ed by MfgrY
Device Sequence No1
Device Event Key0
ManufacturerBECKMAN COULTER, INC.
Manufacturer Address11800 SW 147TH AVE. MIAMI FL 33196 US 33196


Patients

Patient NumberTreatmentOutcomeDate
10 2011-10-14

© 2024 FDA.report
This site is not affiliated with or endorsed by the FDA.