DEVICE 7040100 NETTERVILLE PHONOFORM RT

MAUDE Adverse Event Report

MAUDE data represents reports of adverse events involving medical devices. This maude entry was filed from a 05,06,07,company representati report with the FDA on 2012-01-30 for DEVICE 7040100 NETTERVILLE PHONOFORM RT manufactured by Xomed Mfg Jacksonville.

Event Text Entries

[20914535] It was reported that during a scheduled procedure for vocal cord medialization and augmentation, a "tear in patient's larynx" was noted. It was noted that the surgeon "stuck the implant in and pulled it out several times while trying to adjust the fit each time. " the surgeon "ended up putting a tear in the larynx (may have happened when the patient coughed) and was concerned about infection if they left the implant in place. " the surgeon "removed it and closed without medializing the cords. " the surgeon "will have to reschedule after the patient heals and try again. " according to the (b)(4) coordinator the patient has not rescheduled as of yet.
Patient Sequence No: 1, Text Type: D, B5


[21149174] Event date not provided, notified date used. No medwatch 3500a form was received from the reporter. Any missing or incomplete data on this form 3500a is the result of information not being provided or released by the reporter. Multiple attempts to obtain the required information were made, and the records of these attempts are documented in the complaint file. This product was being used for treatment, not diagnosis. Neither the device in question, applicable imaging films, nor medical records was returned to the manufacturer for evaluation. The report is inconclusive as to the cause of the reported product problem. If the device is returned in the future, product analysis may be performed. The device has not been returned since initial distribution. The information reasonably suggests that a device in question has malfunctioned as defined by the fda and a review of the complaint history indicates that this product issue has resulted in an adverse event in the past and therefore is likely, as defined by the fda, to cause or contribute to serious injury if this event were to recur. The (b)(4) silicone blocks are intended for use as space-occupying implants to aid in surgical reconstructions in laryngeal surgical procedures for vocal cord medialization and augmentation. (b)(4). (b)(4) silicone blocks are not to be used where insufficient tissue is available to cover the implant material. Sizing/customizing recommendations: the surgeon should be familiar with or be trained in the laryngoplasty augmentation techniques, including vocal cord medialization with silicone elastomer implant materials. Proper surgical technique is the responsibility of the surgeon, with patient treatment based on currently accepted techniques and on the surgeon's training. The following recommendations and warnings should be followed to facilitate customization of the implant material: for ease of cutting with sharp scissors, the block should be moistened or dipped in sterile saline or water prior to cutting. Scissors and the user's gloved hands may also be similarly moistened for ease of handling. Use rounded or blunt edged cuts to minimize balling or rolling of the implant material. Blocks may be held with grasping instruments to reduce risk of injury in trimming.
Patient Sequence No: 1, Text Type: N, H10


MAUDE Entry Details

Report Number1045254-2012-00008
MDR Report Key2431746
Report Source05,06,07,COMPANY REPRESENTATI
Date Received2012-01-30
Date of Report2012-01-06
Date of Event2012-01-06
Date Mfgr Received2012-01-06
Date Added to Maude2012-01-30
Event Key0
Report Source CodeManufacturer report
Manufacturer LinkY
Number of Patients in Event0
Adverse Event Flag3
Product Problem Flag3
Reprocessed and Reused Flag3
Reporter OccupationMEDICAL EQUIPMENT COMPANY TECHNICIAN/REPRESENTATIVE
Health Professional3
Initial Report to FDA3
Report to FDA3
Event Location3
Manufacturer ContactRN VETRA SIMMS
Manufacturer Street6743 SOUTHPOINT DRIVE NORTH
Manufacturer CityJACKSONVILLE FL 32216
Manufacturer CountryUS
Manufacturer Postal32216
Manufacturer Phone9043328355
Manufacturer G1MEDTRONIC XOMED, INC.
Manufacturer Street6743 SOUTHPOINT DRIVE NORTH
Manufacturer CityJACKSONVILLE FL 32216
Manufacturer CountryUS
Manufacturer Postal Code32216
Single Use3
Previous Use Code3
Event Type3
Type of Report3

Device Details

Brand NameDEVICE 7040100 NETTERVILLE PHONOFORM RT
Generic NamePOLYMER, ENT SYNTHETIC-POLYAMIDE (MESH OR FOIL MATERIAL)
Product CodeKHJ
Date Received2012-01-30
Model Number7040100
Catalog Number7040100
OperatorHEALTH PROFESSIONAL
Device AvailabilityN
Device AgeDA
Device Eval'ed by MfgrN
Device Sequence No1
Device Event Key0
ManufacturerXOMED MFG JACKSONVILLE
Manufacturer Address6743 SOUTHPOINT DRIVE NORTH JACKSONVILLE FL 32216 US 32216


Patients

Patient NumberTreatmentOutcomeDate
101. Other 2012-01-30

© 2024 FDA.report
This site is not affiliated with or endorsed by the FDA.