SYSTEM 2000 AR*

MAUDE Adverse Event Report

MAUDE data represents reports of adverse events involving medical devices. This maude entry was filed from a 06,07 report with the FDA on 2015-04-10 for SYSTEM 2000 AR* manufactured by Arjohuntleigh Polska Sp. Z.o.o..

Event Text Entries

[5722506] It was initially reported by arjohuntleigh representative that tub tipped: the staff were filling the tub for a resident and it suddenly collapsed, dumping water everywhere flooding the room and hallway. The left leg had given out causing the hinge to drop on one side. No one was in the tub at the time, but the resident was sitting beside the tub ready to be bathed. The rear mounting bolt for the left leg was sheared off causing the failure. No injury occurred as a result of this incident. Photos provided with this complaint confirmed sheared off leg bolt. Device examination performed with the customer showed that general condition of the unit is good with no visible damage. As per the service technician: "complete visual inspection of unit with no apparent reason why the left rear leg bolt has sheared off. No other damage to the unit that can be seen. " dates of the last maintenance and training to the staff are unknown as the device is not under arjo's service contract.
Patient Sequence No: 1, Text Type: D, B5


[13239789] (b)(4). An investigation was carried out into this complaint. When reviewing similar reportable events for system 2000 we have found a low number of other similar cases - tub tipped due to broken leg bolt. We have been able to establish that there is no complaint trend concerning these kind of events. Please note that arjohuntleigh manufactured over (b)(4) system 2000 baths to date. The device was inspected by an arjohuntleigh representative at the customer site and found to be out of the specification - broken leg bolt. The device was being used for patient handling - patient was preparing for a bath, and in that way contributed to the event. From received information no injury occurred to the patient as a result of this incident. The root cause of this event appears to be lack or poor maintenance. Information provided by arjohuntleigh representative showed that this event is related to the issue of corrective and preventive action capa (b)(4) - loose leg bolts: the bolts fastening the legs to the chassis of the bath can get loose and broken off (different applied load and tensions during filling the bath). The bolt rests on a bushing inside the leg to unload it from the weight of the tub. It appears that the bolt tend to break during the filling procedure of the bath. For a bolt that is not positioned correctly inside the bushing this is the point where the load supplied to the leg is rapidly increased. In accordance to capa's investigation the root cause of this problem is a combination of: installation error - bolts not correctly tightened during installation - not following recommendation in assembly and installation manual; not carrying out the maintenance according to preventive maintenance schedule (pms). The review of other similar complaints concerning loose bolts and investigation for corrective and preventive action - capa1126, showed that the root causes for these kind of events are: incorrect installation - not related to complaint tw518680 because the involved device was in use for about 14 years and there is no indication that this bath was re-installed by the customer. Poor maintenance - not following recommendations included in instruction for use. This factor is most likely to be related: device was not under arjo's service contract, no service records are available, the customer was not informed about tan see201304 as this is document for arjo's engineers only. From the above findings we conclude that this incident was caused by user error - poor or lack of maintenance what is in line with ours conclusions for previous similar complaints. The received information and our evaluation as described above are showing that if system 2000's preventive maintenance was followed in accordance to product documentation, there would be no patient or caregiver at risk. See scanned page.
Patient Sequence No: 1, Text Type: N, H10


MAUDE Entry Details

Report Number3007420694-2015-00075
MDR Report Key4707263
Report Source06,07
Date Received2015-04-10
Date of Report2015-03-20
Date of Event2015-03-20
Date Facility Aware2015-03-20
Date Reported to FDA2015-04-09
Date Reported to Mfgr2015-04-09
Date Mfgr Received2015-03-20
Device Manufacturer Date2001-05-01
Date Added to Maude2015-06-03
Event Key0
Report Source CodeManufacturer report
Manufacturer LinkY
Number of Patients in Event0
Adverse Event Flag3
Product Problem Flag3
Reprocessed and Reused Flag3
Health Professional3
Initial Report to FDA3
Report to FDA3
Event Location3
Manufacturer ContactPAMELA WRIGHT
Manufacturer Street12625 WETMORE STE. 308
Manufacturer CitySAN ANTONIO TX 78247
Manufacturer CountryUS
Manufacturer Postal78247
Manufacturer Phone2102787040
Manufacturer G1ARJOHUNTLEIGH POLSKA SP. Z.O.O.
Manufacturer StreetUL. KS. PIOTRA WAWRZYNIAKA 2
Manufacturer CityKOMORNIKI PS-62052
Manufacturer CountryPL
Manufacturer Postal CodePS-62052
Single Use3
Remedial ActionRP
Previous Use Code3
Event Type3
Type of Report3

Device Details

Brand NameSYSTEM 2000
Product CodeILM
Date Received2015-04-10
Model NumberAR*
OperatorHEALTH PROFESSIONAL
Device AvailabilityY
Device Age14 DA
Device Eval'ed by MfgrR
Device Sequence No1
Device Event Key0
ManufacturerARJOHUNTLEIGH POLSKA SP. Z.O.O.
Manufacturer AddressUL. KS. PIOTRA WAWRZYNIAKA 2 KOMORNIKI PL-62052 PL PL-62052


Patients

Patient NumberTreatmentOutcomeDate
101. Other 2015-04-10

© 2025 FDA.report
This site is not affiliated with or endorsed by the FDA.