OLYMPUS MAJ-1632 K10020960

MAUDE Adverse Event Report

MAUDE data represents reports of adverse events involving medical devices. This maude entry was filed from a company representative,foreig report with the FDA on 2015-08-14 for OLYMPUS MAJ-1632 K10020960 manufactured by Keymed (medical & Industrial Equipment) Ltd.

Event Text Entries

[22945235] Device has been discarded.
Patient Sequence No: 1, Text Type: N, H10


[22945236] The maj-1632 is a single-use mouthpiece, intended for use during upper gi endoscopy to protect the flexible endoscope from being bitten and the patient's gums and lips from trauma. The maj-1632 is intended for use in medical facilities under the direction of a trained physician. Keymed (medical & industrial equipment) ltd has been made aware of an event in a (b)(6) healthcare facility where a patient injury has occurred. When the mouthpiece was removed post esophagogastroduodenoscopy (egd) procedure, the patient's tooth was broken. The patient injury was a result of post procedure removal of the mouthpiece. The mouthpiece has been discarded. The broken piece of tooth (fragment size not confirmed) was found in the patient bed at the healthcare facility. The patient has undergone a chest x-ray at the healthcare facility, the result of the x-ray is clear , therefore no portion of the broken tooth remains in the patient.
Patient Sequence No: 1, Text Type: D, B5


[37855989] The subject device was not returned to keymed ltd. The following potential root causes were investigated: manufacturing defect; design issue; and use error (2 possible types). Manufacturing defect - the mouthpiece has not been returned and the batch is unknown. Therefore no manufacturing fault analysis can be undertaken. However, there are no other reported instances and due to the injection moulding process used, it would be expected that the whole batch would contain common defects. The ifu states the following caution: 'caution: do not use a mouthpiece that is damaged or deformed. Doing so may cause patient injury and/or equipment damage. Confirm that the mouthpiece and strap are free from cracks, deformations, discoloration or other irregularities. ' although it is unknown whether the check was performed or acted upon. In conclusion, a manufacturing defect is unlikely to be the cause of this event. (b)(4). The height of the portion that enters the patient mouth is 1. 6 to 2. 0mm larger than the predecessor, but it is doubtful this would increase the likelihood of damage to teeth. The design intent of the mouthpiece is such that it is not expelled accidently during use. In conclusion, a design issue is unlikely to be the cause of this event. Use error - patient tooth was weak prior to the procedure and care was not taken. The ifu states the following caution: 'before using the mouthpiece, check the condition of the patients teeth. In case of any irregularity, take additional care to prevent further trauma' it is unknown whether this check was performed or acted upon. In conclusion, it is possible that this type of use error is the cause of this event. Use error - forced removal of mouthpiece caused tooth to break. The description of event in accompanying email from olympus canada includes 'the patient injury was a result of post-procedure removal, with propofol sedation making it difficult for the patient to expel the device from their mouth on their own. ' there is no guidance in the ifu to take care when removing the mouthpiece. A caution will be added to the ifu advising users that care should be taken when removing the mouthpiece to prevent injury in the oral cavity. In conclusion, it is probable that this type of use error is the cause of the event, possibly in conjunction with the use error type above.
Patient Sequence No: 1, Text Type: N, H10


[37855990] The maj-1632 is a single use-use mouthpiece intended for use during upper gi endoscopy to protect the flexible endoscope from being bitten and the patients gums and lips from trauma. The maj-1632 is intended for use in medical facilities under the direction of a trained physician. Keymed ( medical & industrial equipment) ltd has been made aware of an event in an (b)(6) healthcare facility where a patient injury has occurred. When the mouthpiece was removed post esophagogastroduodenoscopy (egd) procedure, the patient's tooth was broken. The patient injury was a result of post procedure removal of the mouthpiece. The mouthpiece has been discarded. The broken piece of tooth (fragment size not confirmed) was found in the patient bed at the healthcare facility. The patient has undergone a chest x-ray at the healthcare facility, the result of the x-ray is clear, therefore no portion of the broken tooth remains in the patient.
Patient Sequence No: 1, Text Type: D, B5


MAUDE Entry Details

Report Number9611174-2015-00005
MDR Report Key5002933
Report SourceCOMPANY REPRESENTATIVE,FOREIG
Date Received2015-08-14
Date of Report2015-07-23
Date of Event2015-07-23
Date Mfgr Received2015-07-23
Date Added to Maude2015-08-14
Event Key0
Report Source CodeManufacturer report
Manufacturer LinkY
Number of Patients in Event0
Adverse Event Flag3
Product Problem Flag3
Reprocessed and Reused Flag3
Health Professional3
Initial Report to FDA3
Report to FDA3
Event Location3
Manufacturer ContactMS ALISON PRIOR
Manufacturer StreetKEYMED HOUSE STOCK ROAD
Manufacturer CitySOUTHEND ON SEA, ESSEX SS2 5QH
Manufacturer CountryUK
Manufacturer PostalSS2 5QH
Manufacturer Phone702616333
Manufacturer G1KEYMED (MEDICAL & INDUSTRIAL EQUIPMENT) LTD
Manufacturer StreetMEDICAL DEVICE MANUFACTURING CENTRE, JOURNEYMAN'S WAY
Manufacturer CityTEMPLE FARM INDUSTRIAL ESTATE, ESSEX SS2 5TF
Manufacturer CountryUK
Manufacturer Postal CodeSS2 5TF
Single Use3
Previous Use Code3
Event Type3
Type of Report3

Device Details

Brand NameOLYMPUS
Generic NameENDOSONIC MOUTHPIECE
Product CodeMNK
Date Received2015-08-14
Model NumberMAJ-1632
Catalog NumberK10020960
Lot NumberUNKNOWN
OperatorHEALTH PROFESSIONAL
Device AvailabilityN
Device AgeDA
Device Eval'ed by MfgrN
Device Sequence No1
Device Event Key0
ManufacturerKEYMED (MEDICAL & INDUSTRIAL EQUIPMENT) LTD
Manufacturer AddressKEYMED HOUSE STOCK ROAD SOUTHEND ON SEA, ESSEX SS2 5QH UK SS2 5QH


Patients

Patient NumberTreatmentOutcomeDate
10 2015-08-14

© 2024 FDA.report
This site is not affiliated with or endorsed by the FDA.