CARPENTIER-EDWARDS MITRAL ANNULOPLASTY RING SIZER 1150

MAUDE Adverse Event Report

MAUDE data represents reports of adverse events involving medical devices. This maude entry was filed from a company representative,foreig report with the FDA on 2016-05-03 for CARPENTIER-EDWARDS MITRAL ANNULOPLASTY RING SIZER 1150 manufactured by Edwards Lifesciences.

Event Text Entries

[44344403] Evaluation summary: as received, the connection point of handle was broken off; broken piece was not returned. The root cause of the holder breaking could not be conclusively determined. It is unknown how many sterilization cycles the complaint device had gone through before it broke, and how much force had been applied during each use. Customer report of cracked handle was confirmed. Handles or sizers that fragment when in use within the operative field have the potential to result in a piece being retained in the heart that could then embolize when the patient? S heart begins beating. This has the potential to cause a stroke or myocardial infarction. In this case, there was no impact to the patient. Based on the evaluation, the root cause cannot be determined for this event because the number of times this device was used and sterilized remains unknown. Ifu was reviewed and no inadequacies were identified with regards to warnings, contraindications. The ifu states, "handles should be examined for signs of wear, such as dullness, cracking, or crazing and should be replaced immediately if any deterioration is observed. Accessories should be replaced on a routine basis. " based on the available information, no corrective action will be taken as this event does not appear to be manufacturing related. No further action will be taken at this time as the handles were likely cracked or bent due to the age of the device and number of sterilization cycles performed.
Patient Sequence No: 1, Text Type: N, H10


[44344404] Edwards received information that the tip of the handle for an annuloplasty ring was cracked. Reportedly, the nurse attached the first handle to the ring holder and handed the device to the lead surgeon during a mitral annuloplasty case. The handle was not attached to the ring holder completely; the lead surgeon attached the handle to the ring holder completely. Right before the lead surgeon was making guide marks for sutures on the ring, the ring popped off and hit the face (unsterile field) of the other doctor landing in the sterile field. It was confirmed that tip of the handle was bent and cracked. Patient was reported doing well after surgery. It was reported that cleaning of this device was performed using a jet washer at 70 degrees celsius for 10 minutes with an alkaline detergent. Disinfectant used was an neutral-enzyme detergent. Sterilization method used 135 degrees celsius of negative pressure for 15 minutes via autoclave sterilization and double packaging. The customer did not know how many sterilization cycles these handles went through. The handle was returned for evaluation.
Patient Sequence No: 1, Text Type: D, B5


MAUDE Entry Details

Report Number2015691-2016-01464
MDR Report Key5629070
Report SourceCOMPANY REPRESENTATIVE,FOREIG
Date Received2016-05-03
Date of Report2016-04-05
Date of Event2016-02-25
Date Mfgr Received2016-04-05
Date Added to Maude2016-05-03
Event Key0
Report Source CodeManufacturer report
Manufacturer LinkY
Number of Patients in Event0
Adverse Event Flag3
Product Problem Flag3
Reprocessed and Reused Flag3
Health Professional3
Initial Report to FDA3
Report to FDA3
Event Location3
Manufacturer ContactMR. NEIL LANDRY
Manufacturer StreetONE EDWARDS WAY MLE-8
Manufacturer CityIRVINE CA 92614
Manufacturer CountryUS
Manufacturer Postal92614
Manufacturer Phone9492502289
Manufacturer G1EDWARDS LIFESCIENCES LLC
Manufacturer StreetONE EDWARDS WAY IRVINE
Manufacturer CityCA 92614
Manufacturer CountryUS
Manufacturer Postal Code92614
Single Use3
Previous Use Code3
Event Type3
Type of Report3

Device Details

Brand NameCARPENTIER-EDWARDS MITRAL ANNULOPLASTY RING SIZER
Generic NameSIZER, HEART-VALVE, PROSTHESIS
Product CodeDTI
Date Received2016-05-03
Returned To Mfg2016-04-05
Model Number1150
OperatorHEALTH PROFESSIONAL
Device AvailabilityR
Device Eval'ed by Mfgr*
Device Sequence No1
Device Event Key0
ManufacturerEDWARDS LIFESCIENCES
Manufacturer AddressONE EDWARDS WAY IRVINE CA 92614 US 92614


Patients

Patient NumberTreatmentOutcomeDate
10 2016-05-03

© 2024 FDA.report
This site is not affiliated with or endorsed by the FDA.