MONOMAX VIOLET 1(4)200CM HRT48 LOOP(M B0041231

MAUDE Adverse Event Report

MAUDE data represents reports of adverse events involving medical devices. This maude entry was filed with the FDA on 2016-12-07 for MONOMAX VIOLET 1(4)200CM HRT48 LOOP(M B0041231 manufactured by B.braun Surgical Sa.

Event Text Entries

[62131696] (b)(4). Manufacturing site evaluation: evaluation on-going.
Patient Sequence No: 1, Text Type: N, H10


[62131697] Country of complaints: (b)(6). It was reported from the git and urology department of several cases of abdomens opening after laparotomy incisions were closed.
Patient Sequence No: 1, Text Type: D, B5


[68498444] Samples received: 1 unopened pouch. Analysis and results: there are no previous complaints of the same code-batch. Manufactured and distributed in the market (b)(4) units of this code batch. There are no units in our stock. Tightness test to the sample received has been performed and the unit is tight. Tested the knot pull tensile strength of the sample received and the result fulfils the oem requirements. Furthermore, degradation test (24 hours in hcl 3m solution at 37? C) has been conducted with the sample received and the result fulfils the oem requirements. Reviewed the batch manufacturing record, this product had a normal process and the results during the process fulfill the oem requirements. As indicated in the mode of action in the instructions for use of the product: monomax is gradually degraded by hydrolysis and via enzymatic pathways. The degradation process leads to a successive decrease of the material's tensile strength and finally to a complete mass absorption of the fiber. The mass absorption of monomax is essentially completed in between 13 months and more than 36 months, depending on the size of the suture material and the perfusion of the tissue in which the suture is implanted. In the warning notes/precautionary measures from the instructions for use of the product is it also explained that: monomax should be used applying the standard surgical suturing and knotting techniques, taking into account the surgeon's experience with the respective surgical procedure. Care should be taken that the knots are positioned properly and adequate knot security is given. At least a minimum of 4 correctly placed square and flat knots should be done. When working with monomax suture material, great care should be taken to avoid any crushing or crimping damage of the monofilament by instruments such as forceps or needle holders. Final conclusion: although the results of the sample received fulfill the oem specifications, note of this incident is taken in order to assess if new or additional actions are needed. Corrective/preventive actions: according to our internal procedures, there is no need to establish corrective or preventive actions. Nevertheless, this complaint is recorded for trending analysis to assess if actions are needed in the future.
Patient Sequence No: 1, Text Type: N, H10


MAUDE Entry Details

Report Number2916714-2016-00996
MDR Report Key6151856
Date Received2016-12-07
Date of Report2017-02-13
Date Facility Aware2016-12-01
Date Mfgr Received2016-12-28
Date Added to Maude2016-12-07
Event Key0
Report Source CodeManufacturer report
Manufacturer LinkY
Number of Patients in Event0
Adverse Event Flag3
Product Problem Flag3
Reprocessed and Reused Flag3
Health Professional0
Initial Report to FDA0
Report to FDA3
Event Location3
Manufacturer ContactMS. NICOLE BROYLES
Manufacturer Street615 LAMBERT POINTE DRIVE
Manufacturer CityHAZELWOOD MO 63042
Manufacturer CountryUS
Manufacturer Postal63042
Manufacturer Phone3145515988
Manufacturer G1B.BRAUN SURGICAL SA
Manufacturer Street121 CARRETERA DE TERRASSA
Manufacturer CityRUBI, BARCELONA 08191
Manufacturer CountrySP
Manufacturer Postal Code08191
Single Use3
Previous Use Code3
Event Type3
Type of Report3

Device Details

Brand NameMONOMAX VIOLET 1(4)200CM HRT48 LOOP(M
Generic NameSUTURES
Product CodeNJW
Date Received2016-12-07
Model NumberB0041231
Catalog NumberB0041231
Lot Number114491
OperatorHEALTH PROFESSIONAL
Device AvailabilityY
Device AgeDA
Device Eval'ed by MfgrY
Device Sequence No1
Device Event Key0
ManufacturerB.BRAUN SURGICAL SA
Manufacturer Address121 CARRETERA DE TERRASSA RUBI, BARCELONA 08191 SP 08191


Patients

Patient NumberTreatmentOutcomeDate
101. Other 2016-12-07

© 2024 FDA.report
This site is not affiliated with or endorsed by the FDA.