CRITICORE FLUID OUTPUT & CORE TEMPERATURE MONITORING SYSTEM - MONITOR 000002N

MAUDE Adverse Event Report

MAUDE data represents reports of adverse events involving medical devices. This maude entry was filed with the FDA on 2017-05-02 for CRITICORE FLUID OUTPUT & CORE TEMPERATURE MONITORING SYSTEM - MONITOR 000002N manufactured by Dymax Corp. -2523003.

Event Text Entries

[74365503] The investigation is still in progress. Once the investigation is complete a supplemental report will be filed. The information provided by bard represents all of the known information at this time. Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bard.
Patient Sequence No: 1, Text Type: N, H10


[74365504] It was reported that the device would not read the temperature/volume. Additional information has been requested and has not been provided.
Patient Sequence No: 1, Text Type: D, B5


[86888449] The reported issue of the monitor not reading temp/volume was unconfirmed. The criticore was visually inspected upon receipt and was found to be in good overall condition and functions normally. The warranty seal was intact. The root cause of the reported issue could not be determined as the issue could not be replicated. There were no issues found relating to the problem. The coin cell and all 6 d cell batteries were replaced. Both battery housing assemblies were replaced along with one battery cover assembly. One arm cover was installed. The criticore was subsequently inspected and tested by bes-dymax in accordance with bes-dymax standard processes and procedures and was found to fully comply with all requirements and specifications. After servicing, the monitor was calibrated and functioned properly. The device history record was reviewed and found nothing that could have caused or contributed to the reported event. The instructions for use state the following: "warning: the criticore monitor requires special precautions regarding emc and needs to be installed and put into service according to the emc information provided in the following tables. Portable and mobile rf communications equipment may affect the criticore monitor. Warning: the criticore monitor should not be used adjacent to or stacked with other equipment and that if adjacent or stacked use is necessary, the criticore monitor should be observed to verify normal operation in the configuration in which it will be used. Warning: do not immerse or submerge the monitor or turn it upside down when cleaning. Caution: use only heavy-duty alkaline d cell batteries. Do not use rechargeable batteries. Do not incinerate batteries. Recycle or dispose of them properly. Contact bard for disposal information. Caution: improper orientation of the batteries within the battery pack can potentially damage the criticore monitor. Caution: state and federal regulations govern the packaging necessary for return of medical product which may have been contaminated. Refer to local, state and federal regulations when packaging the criticore monitor for return. Caution: there are no user serviceable components inside the criticore monitor. The user should not attempt to repair the criticore monitor. To do so may void the warranty and could result in erroneous monitor readings. Caution: use of cables or sensors other than those specified for use with the criticore monitor, except those sold by bard for use as replacement part or repair components, may result in increased emissions or decreased immunity of the criticore monitor. Caution: the criticore monitor should be recycled properly per european union directive 2002/96/ec on waste electronic and electrical equipment, january 27, 2003. Do not dispose with ordinary municipal waste. " (b)(4). The information provided by bard represents all of the known information at this time. Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bard.
Patient Sequence No: 1, Text Type: N, H10


[86888450] It was reported that the device would not read the temperature/volume. Additional information has been requested and has not been provided.
Patient Sequence No: 1, Text Type: D, B5


MAUDE Entry Details

Report Number1018233-2017-02230
MDR Report Key6538445
Date Received2017-05-02
Date of Report2017-12-29
Date Mfgr Received2017-12-29
Device Manufacturer Date2012-10-29
Date Added to Maude2017-05-02
Event Key0
Report Source CodeManufacturer report
Manufacturer LinkY
Number of Patients in Event0
Adverse Event Flag3
Product Problem Flag3
Reprocessed and Reused Flag3
Reporter OccupationBIOMEDICAL ENGINEER
Health Professional3
Initial Report to FDA3
Report to FDA3
Event Location3
Manufacturer ContactAMY GRAVLEY
Manufacturer Street8195 INDUSTRIAL BLVD
Manufacturer CityCOVINGTON GA 30014
Manufacturer CountryUS
Manufacturer Postal30014
Manufacturer Phone7707846100
Manufacturer G1DYMAX CORP. -2523003
Manufacturer Street110 MARSHALL DRIVE
Manufacturer CityWARRENDALE PA 15086
Manufacturer CountryUS
Manufacturer Postal Code15086
Single Use3
Previous Use Code3
Event Type3
Type of Report3

Device Details

Brand NameCRITICORE FLUID OUTPUT & CORE TEMPERATURE MONITORING SYSTEM - MONITOR
Generic NameCRITICORE MONITOR
Product CodeEXS
Date Received2017-05-02
Returned To Mfg2017-04-18
Catalog Number000002N
Lot NumberNA
OperatorHEALTH PROFESSIONAL
Device AvailabilityR
Device AgeDA
Device Eval'ed by MfgrY
Device Sequence No1
Device Event Key0
ManufacturerDYMAX CORP. -2523003
Manufacturer Address110 MARSHALL DRIVE WARRENDALE PA 15086 US 15086


Patients

Patient NumberTreatmentOutcomeDate
10 2017-05-02

© 2024 FDA.report
This site is not affiliated with or endorsed by the FDA.