MEDTRONIC REUSABLE EXTENSION CABLE 53912

MAUDE Adverse Event Report

MAUDE data represents reports of adverse events involving medical devices. This maude entry was filed from a distributor,health profession report with the FDA on 2017-06-01 for MEDTRONIC REUSABLE EXTENSION CABLE 53912 manufactured by Oscor Inc..

Event Text Entries

[76527670] The customer reported there were four (4) complaints related to this extension cable; all were from the same end user, with no patient involvement. The customer reported additional information that only three (3) cables would be returned for analyses, and that the cables were not reused or resterilized. A review of the device history records could not be performed as the lot number of these cables are unknown. Per analysis, three (3) extension cables were returned from the customer. There were no other accessories, and no visible blood was found anywhere on the extension cables. Cable (b)(4): the cable was returned without the negative connector or strain relief present with the rest of the device. The plug connector has adhesive residue on the outer surface. The wires of the negative connector are twisted at the location of the break. The negative connector and strain relief are missing from the device. Without the connector, the location of the break cannot be confirmed. The cause of the detachment is most likely cause by a torsional stress applied to the wires soldered to the negative connector. The dimensional and functional observations that could be obtained are within manufacturing specifications. Cable (b)(4): the cable was returned with the negative connector and strain relief separated from the rest of cable. The negative connector broke at the exposed wires adjacent to the solder joint. The negative connector and strain relief were separated from the rest of the cable. The failure occurred on the negative connector at the exposed portion of wires adjacent to the solder joint. The dimensional and functional observations that could be obtained are within manufacturing specifications. Cable (b)(4): the cable was returned with the negative connector and strain relief separated from the rest of cable. A "catheter lab" tag was attached to the strain relief of the positive connector. The negative connector broke at the exposed wires adjacent to the solder joint. The negative connector and strain relief were separated from the rest of the cable. The failure occurred on the negative connector at the exposed portion of wires adjacent to the solder joint. The dimensional and functional observations that could be obtained are within manufacturing specifications. Based on this investigation a capa has been opened to address this failure. Oscor will continue to monitor this device for complaint trends and risk. Per cable inspection procedure during in process inspection, the cable is inspected 100% for continuity. During final inspection, each strand of the cable is checked for the correct colored part, overall length of the cable, cable checked for damage and insulation voids, verification that the silicone strain relief extends at least for a length of 2 cm outside the female connector, checked that the silicone strain relief fits the wire snugly, checks for strain relieves for damage and gaps, a pull test is done on each connector and pin, and the cable is inspected again for continuity. The instructions for use (ifu) informs the user: for reusable cables only: the cables can be re-sterilized by oscor eto gas sterilization a maximum of two times. The directions for use inform the user to: first attach the proximal connector(s) to a pacemaker/analyzer or another extension cable while observing polarity indicated by the color. Then attach the distal connector(s) to the temporary lead connector or to another extension cable, again observing polarity by the color. The detachment of the connection should be done in the reverse order. Precautions include: do not connect any cable model to a/c power source; connection of exposed pins to a/c power source may pose a risk of serious injury or death. Extension cables are not intended for use with apnea monitors.
Patient Sequence No: 1, Text Type: N, H10


[76527671] It was reported that four connectors broke under normal use. The connectors are expected to be returned. There was no patient involvement. Additional information was received that only three cables would be returned analyses, and the cables were not reused or resterilized.
Patient Sequence No: 1, Text Type: D, B5


MAUDE Entry Details

Report Number1035166-2017-00042
MDR Report Key6605577
Report SourceDISTRIBUTOR,HEALTH PROFESSION
Date Received2017-06-01
Date of Report2017-06-01
Date of Event2016-12-27
Date Mfgr Received2017-01-09
Date Added to Maude2017-06-01
Event Key0
Report Source CodeManufacturer report
Manufacturer LinkY
Number of Patients in Event0
Adverse Event Flag3
Product Problem Flag3
Reprocessed and Reused Flag3
Health Professional3
Initial Report to FDA3
Report to FDA3
Event Location3
Manufacturer ContactMS DORIT SEGAL
Manufacturer Street3816 DESOTO BLVD.
Manufacturer CityPALM HARBOR FL 346831816
Manufacturer CountryUS
Manufacturer Postal346831816
Manufacturer Phone7279372511
Manufacturer G1OSCOR INC.
Manufacturer Street3816 DESOTO BLVD.
Manufacturer CityPALM HARBOR FL 346831816
Manufacturer CountryUS
Manufacturer Postal Code346831816
Single Use3
Previous Use Code3
Event Type3
Type of Report3

Device Details

Brand NameMEDTRONIC REUSABLE EXTENSION CABLE
Generic NameCABLE, ELECTRODE
Product CodeIKD
Date Received2017-06-01
Returned To Mfg2017-02-15
Model Number53912
Catalog Number53912
Lot NumberUNK
OperatorHEALTH PROFESSIONAL
Device AvailabilityR
Device Eval'ed by MfgrY
Device Sequence No1
Device Event Key0
ManufacturerOSCOR INC.
Manufacturer Address3816 DESOTO BLVD. PALM HARBOR FL 346831816 US 346831816


Patients

Patient NumberTreatmentOutcomeDate
10 2017-06-01

© 2024 FDA.report
This site is not affiliated with or endorsed by the FDA.