MAUDE data represents reports of adverse events involving medical devices. This maude entry was filed from a company representative,health report with the FDA on 2018-08-09 for NUVENT? 1830717FRT70 manufactured by Medtronic Xomed Inc..
[116538600]
The product analysis confirmed that an opened sample of part number 1830717frt70 from and unknown "loat" was received with biological contaminants on the probe. The reported failure was that the device had a hole in it, and it was suggested that the balloon contributed to a patient injury (cerebrospinal fluid leak within the sinus). Visually, there was no damage to the luer connection or housing, and the probe balloon was filled with a reddish liquid. An inflator and extension line were primed with water and secured to the probe; actuating the inflator showed a leak in the probe balloon which would have resulted in the reported malfunction. There was a jagged puncture 0. 33? From the distal tip; the puncture measure less than 0. 010? In diameter; there were multiple abrasions spanning. 50? Leading up to the puncture from the proximal side. There is no allegation of a defect prior to use which likely indicates the damage occurred during use. The information indicates probable causes including: aggressive use, and incorrect balloon size as it relates to the patient? S anatomy. The ifu / user manual indicates that the device is used in conjunction with a computer-assisted surgery system and its associated applications are intended as an aid for precisely locating anatomical structures in either open or percutaneous procedures which can be identified relative to a ct- or mr-based model, or digitized landmarks of the anatomy. The balloon dilation is used for pathway expansion effects. Warnings include - do not place metal objects in magnetic field (this could cause navigational inaccuracy); do not use the sinus seeker to perforate thick bone; and use of the incorrect balloon size may cause damage to the sinus balloon and / or surrounding anatomy. Use instructions state that the surgeon should use patient ct scan (hard copies or on medtronic computer-assisted surgery system) to determine the correct balloon size based on the bony margins of the outflow tract and directs the user how to confirm accuracy of the device prior to navigation. If information is provided in the future, a supplemental report will be issued.
Patient Sequence No: 1, Text Type: N, H10
[116538601]
During a navigated sinus procedure the surgeon ballooned left then right sphenoid with sphenoid balloon. He then switched balloons to a frontal balloon and ballooned left frontal. Went to right frontal to balloon and indicator did not? Pop?. Took balloon out, recharged [primed] inflator, went back into frontal, noticed clear liquid and indicator still did not pop. Took balloon out, examined balloon and noticed hole in balloon causing the leak. Another frontal balloon was located and connected to the inflator; and then the inflator was charged [primed]. Went back to right frontal, pushed down plunger and indicator did not pop. Noticed air in the line. Pulled balloon back out and recharged [primed] the inflator making sure there was no air in line. Went back into frontal and successfully ballooned. The surgeon then noticed a clear liquid on the right side of the patient's nose that was found to be a csf leak, which was confirmed with a ct scan; "the ct revealed there was a small crack on the posterior side of the frontal sinus". When the csf leak occurred is not known; however, they confirmed that there were no issues with the navigation. The csf leak was treated and at this time the patient is doing fine.
Patient Sequence No: 1, Text Type: D, B5
[116918991]
Part 18 inf kit nuvent inflator kit lot 0215435205 mfg 2018-05-10 the inflator kit (inflator and extension line) was tested along with the navigated balloon probe. There was no damage to any of the connectors or connected ends. The inflator and extension line were secured while the distal end was blocked off; actuating the inflator by depressing the plunger pressurized the system without any leaks present. There were no faults found with the inflator kit. If information is provided in the future, a supplemental report will be issued.
Patient Sequence No: 1, Text Type: N, H10
Report Number | 1045254-2018-00360 |
MDR Report Key | 7766932 |
Report Source | COMPANY REPRESENTATIVE,HEALTH |
Date Received | 2018-08-09 |
Date of Report | 2018-10-03 |
Date of Event | 2018-07-13 |
Date Mfgr Received | 2018-08-08 |
Device Manufacturer Date | 2018-04-17 |
Date Added to Maude | 2018-08-09 |
Event Key | 0 |
Report Source Code | Manufacturer report |
Manufacturer Link | Y |
Number of Patients in Event | 0 |
Adverse Event Flag | 3 |
Product Problem Flag | 3 |
Reprocessed and Reused Flag | 3 |
Health Professional | 3 |
Initial Report to FDA | 3 |
Report to FDA | 3 |
Event Location | 3 |
Manufacturer Contact | URIZA SHUMS |
Manufacturer Street | 6743 SOUTHPOINT DR. N. |
Manufacturer City | JACKSONVILLE FL 32216 |
Manufacturer Country | US |
Manufacturer Postal | 32216 |
Manufacturer Phone | 9043328405 |
Manufacturer G1 | MEDTRONIC XOMED INC. |
Manufacturer Street | 6743 SOUTHPOINT DR N |
Manufacturer City | JACKSONVILLE FL 32216 |
Manufacturer Country | US |
Manufacturer Postal Code | 32216 |
Single Use | 3 |
Previous Use Code | 3 |
Event Type | 3 |
Type of Report | 3 |
Brand Name | NUVENT? |
Generic Name | INSTRUMENT, ENT MANUAL SURGICAL |
Product Code | LRC |
Date Received | 2018-08-09 |
Returned To Mfg | 2018-07-19 |
Model Number | 1830717FRT70 |
Catalog Number | 1830717FRT70 |
Lot Number | 0215283102 |
Operator | HEALTH PROFESSIONAL |
Device Availability | R |
Device Age | DA |
Device Eval'ed by Mfgr | Y |
Device Sequence No | 1 |
Device Event Key | 0 |
Manufacturer | MEDTRONIC XOMED INC. |
Manufacturer Address | 6743 SOUTHPOINT DR N JACKSONVILLE FL 32216 US 32216 |
Patient Number | Treatment | Outcome | Date |
---|---|---|---|
1 | 0 | 1. Required No Informationntervention | 2018-08-09 |