EVIS EXERA II XENON LIGHT SOURCE CLV-180

MAUDE Adverse Event Report

MAUDE data represents reports of adverse events involving medical devices. This maude entry was filed from a health professional,user faci report with the FDA on 2019-05-08 for EVIS EXERA II XENON LIGHT SOURCE CLV-180 manufactured by Olympus Medical Systems Corp..

Event Text Entries

[144398962] The device was not returned to olympus for evaluation. The cause of the reported event cannot be determined. The clv-180 instruction manual provides users several warnings to mitigate shock. ? Before connecting the endoscope connector to the lightsource, make sure that it is completely dry. Otherwise, electric shock or equipment damage can result. Strictly observe the following precautions. Failure to do so may place the patient and medical personnel in danger of an electric shock. When the light source is used to examine a patient, do not allow metal parts of the endoscope or its accessories to touch metal parts of other system components. Such contact may cause unintended current flow to the patient. Keep fluids away from all electrical equipment. If fluids are spilled on or into the unit, stop operation of the light source immediately and contact olympus. Do not prepare, inspect or use this light source with wet. "
Patient Sequence No: 1, Text Type: N, H10


[144398963] Olympus was informed that during or setup, the facility? S technician was shocked while connecting the gastrointestinal videoscope to the lightsource and video processor. It was reported that the video system might have been powered on but the light source was not. The user facility believes that the videoscope cable may have been connected to the light source when the incident occurred. A second technician present in the room reported observing a flash at the same time the injured technician yelled out from the shock. The technician was sent to the user facility? S emergency room and was treated for numbness in the hand. The technician is currently doing well and has since returned to full duties. Additionally, it was reported that the user facility? S biomed removed the light source and video system from service to perform a grounding and current leakage test. No anomalies were found with light source or video system. The biomed also, visually inspected the equipment and found no visible burn marks on the system. The two devices were powered by a non-olympus power source, which was also tested and inspected with no anomalies found.
Patient Sequence No: 1, Text Type: D, B5


MAUDE Entry Details

Report Number2951238-2019-00818
MDR Report Key8589628
Report SourceHEALTH PROFESSIONAL,USER FACI
Date Received2019-05-08
Date of Report2019-07-25
Date of Event2019-04-03
Date Mfgr Received2019-07-23
Date Added to Maude2019-05-08
Event Key0
Report Source CodeManufacturer report
Manufacturer LinkY
Number of Patients in Event0
Adverse Event Flag3
Product Problem Flag3
Reprocessed and Reused Flag3
Health Professional3
Initial Report to FDA3
Report to FDA3
Event Location3
Manufacturer ContactMS. CONNIE TUBERA
Manufacturer Street2400 RINGWOOD AVENUE
Manufacturer CitySAN JOSE CA 95131
Manufacturer CountryUS
Manufacturer Postal95131
Manufacturer Phone4089355124
Single Use3
Previous Use Code3
Event Type3
Type of Report3

Device Details

Brand NameEVIS EXERA II XENON LIGHT SOURCE
Generic NameXENON LIGHT SOURCE
Product CodeGCT
Date Received2019-05-08
Returned To Mfg2019-06-07
Model NumberCLV-180
Device AvailabilityR
Device AgeDA
Device Eval'ed by MfgrY
Device Sequence No1
Device Event Key0
ManufacturerOLYMPUS MEDICAL SYSTEMS CORP.
Manufacturer Address2951 ISHIKAWA-CHO HACHIOJI-SHI, TOKYO-TO 192-8507 JA 192-8507


Patients

Patient NumberTreatmentOutcomeDate
10 2019-05-08

© 2024 FDA.report
This site is not affiliated with or endorsed by the FDA.