UNK - DRILL BITS: TRAUMA

MAUDE Adverse Event Report

MAUDE data represents reports of adverse events involving medical devices. This maude entry was filed from a company representative report with the FDA on 2020-03-19 for UNK - DRILL BITS: TRAUMA manufactured by Wrights Lane Synthes Usa Products Llc.

Event Text Entries

[186132177] This report is for an unknown drill bit/ unknown lot. Part and lot number are unknown; udi number is unknown. Complainant part is not expected to be returned for manufacturer review/ investigation. Reporter is a synthes employee. Without a lot number the device history records review could not be completed. Product was not returned. Based on the information available, it has been determined that no corrective and/or preventative action is proposed. This complaint will be accounted for and monitored via post market surveillance activities. If additional information is made available, the investigation will be updated as applicable. (b)(4). Device was used for treatment, not diagnosis. If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Patient Sequence No: 1, Text Type: N, H10


[186132178] It was reported that on an unknown date the patient had an unknown procedure using a trochanteric femoral nailing advanced (tfna) system. During the surgery, while installing the tfna and approaching the intramedullary (im) canal, it was realized that the canal was too tight distally. The canal was reamed after cabling the femur to reduce a section of the fracture. After reducing the fracture with the unknown cables, the surgeon began reaming for an unknown nail and installed the nail. Then the surgeon began the proximal locking with an unknown helical blade and everything was fine. However, when the surgeon began attempting to lock distally by drilling the hole, the surgeon heard the chattering of the bone and the drill would not advanced any further. The surgeon changed the drill and drilled again, the aiming arm and insertion handle to tfna were tight and attached properly with everything in the proper location. Finally, the surgeon then removed the aiming arm and insertion handle and attempted to freehand the distal locking screw when he heard a chattering. The surgeon stop drilling and could not drill for the distal locking hole and finished without the distal locking screw. Procedure and patient status were unknown. Concomitant devices: unknown reamer (part # unknown, lot# unknown, quantity 1), unknown cable (part # unknown, lot # unknown, quantity unknown), unknown tfna helical blade (part# unknown, lot# unknown, quantity 1). This report is for one unknown drill bit. This is report 2 of 6 for (b)(4).
Patient Sequence No: 1, Text Type: D, B5


MAUDE Entry Details

Report Number2939274-2020-01370
MDR Report Key9855834
Report SourceCOMPANY REPRESENTATIVE
Date Received2020-03-19
Date of Report2020-02-20
Date Mfgr Received2020-02-20
Date Added to Maude2020-03-19
Event Key0
Report Source CodeManufacturer report
Manufacturer LinkY
Number of Patients in Event0
Adverse Event Flag3
Product Problem Flag3
Reprocessed and Reused Flag3
Reporter OccupationOTHER HEALTH CARE PROFESSIONAL
Health Professional3
Initial Report to FDA3
Report to FDA3
Event Location3
Manufacturer ContactKARA DITTY-BOVARD
Manufacturer Street1302 WRIGHTS LANE EAST
Manufacturer CityWEST CHESTER PA 19380
Manufacturer CountryUS
Manufacturer Postal19380
Manufacturer Phone6103142063
Single Use3
Previous Use Code3
Event Type3
Type of Report3

Device Details

Brand NameUNK - DRILL BITS: TRAUMA
Generic NameBIT, DRILL
Product CodeHTW
Date Received2020-03-19
OperatorHEALTH PROFESSIONAL
Device AvailabilityN
Device Eval'ed by MfgrR
Device Sequence No1
Device Event Key0
ManufacturerWRIGHTS LANE SYNTHES USA PRODUCTS LLC
Manufacturer Address1302 WRIGHTS LANE EAST WEST CHESTER PA 19380 US 19380


Patients

Patient NumberTreatmentOutcomeDate
101. Required No Informationntervention 2020-03-19

© 2024 FDA.report
This site is not affiliated with or endorsed by the FDA.