Tray, Surgical Instrument - ST-6
2023-06-26
Conkin Surgical Instruments Ltd
GUDID#
Tor-Mark Ocular Marker - Tor-Mark-10
2023-03-02
Valtchev Uterine Mobilizer - THE VALTCHEV® UTERINE MOBILIZER, MODEL VUM-6 consists of a body and interchangeable obturators and cannulas. The body consists of a metal bar and a metal tube which pivot the head. One end of the tube is attached to a piston and the opposite end is attached to a Luer syringe connector. The locking wheel is also attached to the tube. The locking wheel is held in place by a lock. The arm space bar permits manipulation of the head. By means of alocking screw on the upper end of the arm space bar the Mobilizer can be locked in the desired position. The finger ring is located at the lower end of the arm spacer bar. The head accommodates, in its cavity, an obturator or a cannula locking in place by a lock. The four uterine obturators, which are of different lengths and thicknesses are used as follows: No.17 and No.18 are for mobilization of a smaller uterus, No.19 and No.20 are for mobilization of larger uterus. The cannulas: (15A) and (16A) are used for injection of either dye or an X-ray contrast medium. The syringe for injection is attached to the Luer syringe connector. The Mobilizer is held in place by a Valtchev® tenaculum, supported by a tenaculum holder and held taut by a spring. This device is reusable. The attachments have no stand alone functionality, however can be ordered separately.
2016-09-24
Valtchev Uterine Mobilizer - This attachment to the Valtchev Uterine Mobilizer model VUM-6 is a stainless steel cannula having a length of 72 mm and shaft thickness of 3 mm. The pin on the cannula must slip into the notch of the head of the VUM-6 base instrument. The cannula has no stand alone functionality and is either sold as part of the VUM-6 complete set or as a separate replacement part.
2016-09-24
Valtchev Uterine Mobilizer - This attachment to the Valtchev Uterine Mobilizer model VUM-6 is a stainless steel cannula having a length of 83 mm and shaft thickness of 3 mm. The pin on the cannula must slip into the notch of the head of the VUM-6 base instrument. The cannula has no stand alone functionality and is either sold as part of the VUM-6 complete set or as a separate replacement part.
2016-09-24
Valtchev Uterine Mobilizer - This attachment to the Valtchev Uterine Mobilizer model VUM-6 is a stainless steel obturator having a length of 45 mm and shaft thickness of 3 mm. The pin on the obturator must slip into the notch of the head of the VUM-6 base instrument. The obturator has no stand alone functionality and is either sold as part of the VUM-6 complete set or as a separate replacement part.
2016-09-24
Valtchev Uterine Mobilizer - This attachment to the Valtchev Uterine Mobilizer model VUM-6 is a stainless steel obturator No. 18, having a length of 55 mm and shaft thickness of 3 mm. The pin on the obturator must slip into the notch of the head of the VUM-6 base instrument. The obturator has no stand alone functionality and is either sold as part of the VUM-6 complete set or as a separate replacement part.
2016-09-24
Valtchev Uterine Mobilizer - This attachment to the Valtchev Uterine Mobilizer model VUM-6 is a stainless steel obturator No. 19, having a length of 80 mm and shaft thickness of 8 mm. The pin on the obturator must slip into the notch of the head of the VUM-6 base instrument. The obturator has no stand alone functionality and is either sold as part of the VUM-6 complete set or as a separate replacement part.
2016-09-24
Valtchev Uterine Mobilizer - This attachment to the Valtchev Uterine Mobilizer model VUM-6 is a stainless steel obturator No. 20, having a length of 100 mm and shaft thickness of 10 mm. The pin on the obturator must slip into the notch of the head of the VUM-6 base instrument. The obturator has no stand alone functionality and is either sold as part of the VUM-6 complete set or as a separate replacement part.
2016-09-24
Valtchev Uterine Mobilizer - This attachment to the Valtchev Uterine Mobilizer model VUM-6 is a stainless steel tenaculum. The Valtchev Tenaculum is used to hold the VUM-6 uterine mobilizer in place when the cannulas 15A or 16A are used for injection of either dye or an X-ray contrast medium. This tenaculum has no stand alone functionality and is either sold as part of the VUM-6 complete set or as a separate replacement part.
2016-09-24
Valtchev Uterine Mobilizer - This item is the VUM-6 Tube for Dye Injection which is an integral part of the Valtchev Uterine Mobilizer, Model VUM-6. The tube has no stand alone functionality and is part of the VUM-6 device. This is a replacement part that can be ordered separately if needed.
2016-09-24
Valtchev Uterine Mobilizer - This is the large locking screw for the VUM-6 and is part of the VUM-6 when sold as a complete unit. The locking screw has no stand alone functionality and is to be used in conjunction with the VUM-6 uterine mobilizer. This is a replacement part that can be ordered separately.
2016-09-24
Valtchev Uterine Mobilizer - THE VALTCHEV® UTERINE MOBILIZER, MODEL VUM-6 consists of a body and interchangeable obturators and cannulas. The body consists of a metal bar and a metal tube which pivot the head. One end of the tube is attached to a piston and the opposite end is attached to a Luer syringe connector. The locking wheel is also attached to the tube. The locking wheel is held in place by a lock. The arm space bar permits manipulation of the head. By means of a locking screw on the upper end of the arm space bar the Mobilizer can be locked in the desired position. The finger ring is located at the lower end of the arm spacer bar. The head accommodates, in its cavity, an obturator or a cannula locking in place by a lock. The four uterine obturators, which are of different lengths and thicknesses are used as follows: No.17 and No.18 are for mobilization of a smaller uterus, No.19 and No.20 are for mobilization of larger uterus. The cannulas: (15A) and (16A) are used for injection of either dye or an X-ray contrast medium. The syringe for injection is attached to the Luer syringe connector. The Mobilizer is held in place by a Valtchev® tenaculum, supported by a tenaculum holder and held taut by a spring. This device is reusable. The attachments have no stand alone functionality, however can be ordered separately.
2016-09-24