QualityFlow O2 Series (QualityFLOW O2); QualityFlow O2 Series (QualityFLOW O2 MTV)
Dehas Medical Systems GmbH
Dehas Medical Systems GmbH
PMN#
Quality Mix Blender, Oxymixer
Dehas Medical Systems GmbH
GUDID#
Quality Connect HD - CO2 high pressure tube, Storz Insufflator connection 7/16"-20UNF to W21.8_14 with sinter filter, 55 cm. A length of flexible tube intended to deliver and withstand gases under very high pressure, e.g., greater than 200 bar/3000 pounds per square inch (psi). It may be composed of any of several malleable or semi-rigid materials (e.g., plastic, rubber, or nylon), and braided with cotton wool and/or stainless steel. It is typically used to transport high pressure compressed medical gas to a pressure regulating device. It is available in various lengths, including standard coil lengths. This is a reusable device.
2023-01-02
Quality Connect HD - CO2 high pressure tube 102 cm, Storz insufflator connection 7/16"-20UNF on both sides + mounted ISO adapter with sinter filter. A length of flexible tube intended to deliver and withstand gases under very high pressure, e.g., greater than 200 bar/3000 pounds per square inch (psi). It may be composed of any of several malleable or semi-rigid materials (e.g., plastic, rubber, or nylon), and braided with cotton wool and/or stainless steel. It is typically used to transport high pressure compressed medical gas to a pressure regulating device. It is available in various lengths, including standard coil lengths. This is a reusable device.
2023-01-02
Quality Connect HD - CO2 high-pressure tube 55 cm, Storz insufflator connection 7/16"-20UNF on both sides + mounted PIN index adapter with sinter filter. A length of flexible tube intended to deliver and withstand gases under very high pressure, e.g., greater than 200 bar/3000 pounds per square inch (psi). It may be composed of any of several malleable or semi-rigid materials (e.g., plastic, rubber, or nylon), and braided with cotton wool and/or stainless steel. It is typically used to transport high pressure compressed medical gas to a pressure regulating device. It is available in various lengths, including standard coil lengths. This is a reusable device.
2023-01-02
Quality Connect HD - CO2 high pressure tube 102 cm, Storz insufflator connection 7/16"-20UNF on both sides + mounted PIN index adapter with sinter filter. A length of flexible tube intended to deliver and withstand gases under very high pressure, e.g., greater than 200 bar/3000 pounds per square inch (psi). It may be composed of any of several malleable or semi-rigid materials (e.g., plastic, rubber, or nylon), and braided with cotton wool and/or stainless steel. It is typically used to transport high pressure compressed medical gas to a pressure regulating device. It is available in various lengths, including standard coil lengths. This is a reusable device.
2023-01-02
Quality Connect HD - CO2 high pressure Tube 102 cm, Storz insufflator connection 7/16"-20UNF on both sides + mounted ISO adapter with sinter filter. A length of flexible tube intended to deliver and withstand gases under very high pressure, e.g., greater than 200 bar/3000 pounds per square inch (psi). It may be composed of any of several malleable or semi-rigid materials (e.g., plastic, rubber, or nylon), and braided with cotton wool and/or stainless steel. It is typically used to transport high pressure compressed medical gas to a pressure regulating device. It is available in various lengths, including standard coil lengths. This is a reusable device.
2023-01-02
Quality Connect - Connection Tube DIN, CO2, ZGV plug (without valve) to 7/16"-20UNF fitting, ISO-colored, 1.50 m long. A length of reinforced colour-coded flexible tubing produced according to ISO5359 and intended to conduct compressed carbon dioxide (CO2) from a CO2 terminal unit or CO2 cylinder to a medical device that functions with CO2 (e.g., ventilator, insufflation system). The gas pressure in the tubing will be low, a "working pressure" (e.g., 3 - 5 bar), having been reduced by a regulator from a high pressure. The tubing is reinforced with, e.g., woven polyester or cotton, and intended for use within a static clinical environment (e.g., intensive care). It is available in various lengths, including standard coil lengths. This is a reusable device. (en)
2023-01-02
Quality Connect - Connection Tube DIN, CO2, ZGV connector (without valve) to 7/16"-20UNF fitting, ISO-colored, 3.00 m long. A length of reinforced colour-coded flexible tubing produced according to ISO5359 and intended to conduct compressed carbon dioxide (CO2) from a CO2 terminal unit or CO2 cylinder to a medical device that functions with CO2 (e.g., ventilator, insufflation system). The gas pressure in the tubing will be low, a "working pressure" (e.g., 3 - 5 bar), having been reduced by a regulator from a high pressure. The tubing is reinforced with, e.g., woven polyester or cotton, and intended for use within a static clinical environment (e.g., intensive care). It is available in various lengths, including standard coil lengths. This is a reusable device. (en)
2023-01-02
Quality Connect - Connection Tube DISS, CO2, DISS fitting to 7/16"-20UNF fitting, ISO-colored, 1.50 m long. A length of reinforced colour-coded flexible tubing produced according to ISO5359 and intended to conduct compressed carbon dioxide (CO2) from a CO2 terminal unit or CO2 cylinder to a medical device that functions with CO2 (e.g., ventilator, insufflation system). The gas pressure in the tubing will be low, a "working pressure" (e.g., 3 - 5 bar), having been reduced by a regulator from a high pressure. The tubing is reinforced with, e.g., woven polyester or cotton, and intended for use within a static clinical environment (e.g., intensive care). It is available in various lengths, including standard coil lengths. This is a reusable device. (en)
2023-01-02
Quality Connect - Connection Tube DIN, CO2, ZGV connector (without valve) to 7/16"-20UNF fitting, ISO-colored, 6.00 m long A length of reinforced colour-coded flexible tubing produced according to ISO5359 and intended to conduct compressed carbon dioxide (CO2) from a CO2 terminal unit or CO2 cylinder to a medical device that functions with CO2 (e.g., ventilator, insufflation system). The gas pressure in the tubing will be low, a "working pressure" (e.g., 3 - 5 bar), having been reduced by a regulator from a high pressure. The tubing is reinforced with, e.g., woven polyester or cotton, and intended for use within a static clinical environment (e.g., intensive care). It is available in various lengths, including standard coil lengths. This is a reusable device. (en)
2023-01-02
QualityREG - Quick plug adapter NIST / DIN with safety Chain, adapter NIST / coupling with chain and ring.
2024-07-24
Quality Connect - Connection hose DIN, CO2, NIST-screwing to NIST-screwing, ISO color, 1.50 m long
2024-04-16
Quality Connect - Connection hose DIN, CO2, central gas supply plug to NIST-screwing, ISO color, 1.50 m long
2024-04-16
Quality Connect - Connection hose NF, CO2, french standard AFNOR, central gas supply plug to NIST-screwing, ISO color, 5.00 m long
2024-04-16
Quality Connect - Connection hose Richard Wolf DIN, CO2, central gas supply plug to NIST-screwing, ISO color, 5.00 m long
2024-04-16
QualityREG - QualityREG CO2 Pressure Regulator, Connection DIN ISO 477-6, NIST incl. Pressure gauge
2024-04-08
QualityREG - QualityREG CO2 Pressure Regulator, Connection DIN EN ISO 407 PIN INDEX, NIST incl. Pressure gauge
2024-04-08
QualityREG - QualityREG CO2 Pressure Regulator, Connection ISO 5145, NIST incl. Pressure gauge
2024-04-08
Oxymixer High Flow SET - Oxymixer blender High Flow SET
2023-02-17
Oxymixer Low Flow SET - Oxymixer blender Low Flow SET
2023-02-17
Oxymixer XL Low Flow - Oxymixer XL blender Low Flow
2023-02-17
Oxymixer Low Flow 15LPM - Oxymixer blender Low Flow with 15LPM Flowmeter
2023-02-17
Oxymixer Configuration - Oxymixer blender configurable with blender Low Flow or High Flow blender version.
2023-02-17