motionconcepts.comModular Power Standing System
Motion Concepts
MOTION CONCEPTS LP
FDA Registration(s)#
| Registration | FEI | Name | Status | Initial importer | Expiration year | Address |
|---|---|---|---|---|---|---|
| 9615350 | 3001045529 | MOTION CONCEPTS LP | 1 | N | 2026-01-01 | 505 Cityview Blvd Unit#1 Vaughan Ontario CA L4H 0L8 |
GUDID Contact Samples#
| Source GUDID | Product | Phone | |
|---|---|---|---|
| 07540147004002 | Matrx MAC Back Cover - Matrx MAC Back Extra/Replacement Cover. | 1-888-433-6818 | info@motionconcepts.com |
| 07540147004019 | Matrx MAC Back IC Cover - MAC Back Extra/Replacement IC Cover Only | 1-888-433-6818 | info@motionconcepts.com |
| 07540147004026 | MAC SWING AWAY LATERAL W/PAD - "MAC Swing Away Lateral with Pads are designed for using with the Matrx MAC Back. this Swing Away laterals are available in 4 sizes/(XS - 3.25"" x 4.25""; Small (S)- 3.5"" x 5.25""; Medium (M)- 3.75"" x 5.75"" ;and Large(L)- 4.25"" x 6.5""). " | 1-888-433-6818 | info@motionconcepts.com |
| 07540147004033 | Side Mount Headrest Interface Plate - This is an Offset Headrest Mount Kit. The mount allows headrest clamp to be installed in an offset from the back support centerline, with some inch of increments. | 1-888-433-6818 | info@motionconcepts.com |
| 07540147011444 | MODULAR POWER STANDING SYSTEM - Maxx MPSS Stander System | 905-695-0134 | info@motionconcepts.com |
| 07540147011451 | MODULAR POWER STANDING SYSTEM - Maxx MPSS-MINI Stander System | 905-695-0134 | info@motionconcepts.com |
Registered Device Listings#
| Registration key | Listing key | Premarket submission | Device | Product code | Decision date |
|---|---|---|---|---|---|
| 175103 | 1681054788 | K191376 | Modular Power Standing System | IPL | 2019-08-13 |
| 175103 | 1620175619 | K182995 | Bariatric Power Positioning System (BPPS) | ITI | 2019-03-08 |
| 175103 | 1271143521 | K150574 | Modular Power Positioning System | ITI | 2015-06-30 |
| 175103 | 1145495706 | ||||
| 175103 | 1198992130 | ||||
| 175103 | 1258192989 | ||||
| 175103 | 1296313775 | ||||
| 175103 | 1331720681 | ||||
| 175103 | 1591224357 | ||||
| 175103 | 1632620989 | ||||
| 175103 | 1688209815 | ||||
| 175103 | 1852269514 | ||||
| 175103 | 2056417627 |
Product Codes Associated With Registrations#
PMN#
Bariatric Power Positioning System (BPPS)
Motion Concepts
Modular Power Positioning System
MOTION CONCEPTS
TRX VERTICAL POSITIONER
MOTION CONCEPTS
TRZ-CG POWER POSITIONING SYSTEM WITH CENTER-OF-GRAVITY SHIFTING POWER TILT, RECLINE, AND POWER ELEVATING SEAT
MOTION CONCEPTS
TRX-CG POWER TILT AND RECLINE SYSTEM
MOTION CONCEPTS
TRX-CG POWER TILT AND RECLINE SYSTEM
MOTION CONCEPTS
TRX-CG CENTER-OF-GRAVITY SHIFTING POWER TILT AND RECLINE SYSTEMS
MOTION CONCEPTS
TRX POWER TILT AND RECLINE SYSTEM
MOTION CONCEPTS
GUDID#
Side Mount Headrest Interface Plate - This is an Offset Headrest Mount Kit. The mount allows headrest clamp to be installed in an offset from the back support centerline, with some inch of increments.
2026-05-19
MAC SWING AWAY LATERAL W/PAD - "MAC Swing Away Lateral with Pads are designed for using with the Matrx MAC Back. this Swing Away laterals are available in 4 sizes/(XS - 3.25"" x 4.25""; Small (S)- 3.5"" x 5.25""; Medium (M)- 3.75"" x 5.75"" ;and Large(L)- 4.25"" x 6.5""). "
2026-05-19
Matrx MAC Back IC Cover - MAC Back Extra/Replacement IC Cover Only
2026-05-08
Matrx MAC Back Cover - Matrx MAC Back Extra/Replacement Cover.
2026-05-08
MODULAR POWER STANDING SYSTEM - Maxx MPSS-MINI Stander System
2021-08-12
MODULAR POWER STANDING SYSTEM - Maxx MPSS Stander System
2021-08-12
MODULAR POWER POSITIONING SYSTEM - "REHAB SEAT with 10"" LIFT and MANUAL RECLINE Back"
2025-10-22
MODULAR POWER POSITIONING SYSTEM - "REHAB SEAT with 12"" Lift and MANUAL RECLINE Back"
2025-10-22
MODULAR POWER POSITIONING SYSTEM - REHAB SEAT with MANUAL RECLINE Back
2025-10-22
MODULAR POWER POSITIONING SYSTEM - "DROP SEAT - MAXX RAIL (45 Deg TILT with 10"" LIFT and MANUAL RECLINE Back)"
2025-10-22
MODULAR POWER POSITIONING SYSTEM - "DROP SEAT - MAXX RAIL (45 Deg TILT, with 12"" LIFT and MANUAL RECLINE Back)"
2025-10-22
MODULAR POWER POSITIONING SYSTEM - DROP SEAT - MAXX RAIL (50 Deg TILT with MANUAL RECLINE Back)
2025-10-22
Seat Rigidizer - Lightweight plastic seat insert fits between seat rails for level support and eliminates hammock effect of seat upholstery. Securely attached to bottom of cushion insidecushion cover
2022-12-08
Recline Body-Fit System, Seat Frame Assy - "Seat Frame Assembly for the Recline Body-Fit System. The Recline Body-Fit System is designed to allow for installation of narrower (offset) back canes (optional 2"" or 4"" cane offset available). (A minimum 16H back height required). These wheelchair components are designed for use with Motion Concepts Power Positioning Systems with Recline."
2022-12-08
Drop Seat, Width & Depth Conversion Kits - Drop Seat, Width & Depth Conversion Kits. Optional Conversion Kits are designed to allow the seat frame width and/or depth to be increased without replacement of the original drop seat. Various conversion kit options are available depending on the required range of width and depth adjustment. Kit contents will differ depending on the configuration of the original seating system (i.e. Tilt Systems or Recline Systems). These wheelchair components are designed for for use on our standard and bariatric Motion Concepts Power Positioning Systems.
2023-10-06
Drop Seat, Seat Frame Assembly - "Drop Seat, Seat frame assembly. Seat frame assemblies are configured in various widths and depth ranges. The seat frame width is adjustable in 1"" increments (within designated range of adjustment). These wheelchair components are designed for use on on Motion Concepts Power Positioning Systems configured with Rehab Seating, or Tilt-Only Seating, or Tilt/Recline Seating or Recline-Only Seating"
2023-10-06
Matrx Elite Back Interface Mounting Kit for Amylior Wheelchairs - Cane Mounted Interface Kit designed to allow mounting of Matrx Elite or Elite Heavy-Duty Backs onto an Amylior wheelchair seating system. (installs onto Tilt canes)
2024-05-16
Matrx E2 Back Interface Mounting Kit for Amylior Wheelchairs - Cane Mounted Interface Kit designed to allow mounting of Matrx E2 Backs onto an Amylior wheelchair seating system (installs onto Tilt canes)
2024-05-16
Cross Brace Assembly, Maces Back Interface - Cross Brace Assembly for the MACES Back Interface is designed for use on Motion Concepts Power Positioning Systems configured with a Recline function. The MACES interface is limited to back widths ranging from 14W-20W. MACES hardware allows the for full rotational (multi-axis) angle adjustment of the mounted back support
2022-12-08
Spreader Assy, Rehab Backs (Recline) - Recline Spreader Mounting Assembly is designed for use with Recline Canes on Motion Concepts Adult and Mini Power Positioning Systems (PPS) configured with a Recline function. The Recline Spreader Mounting Assy is utilized for mounting Rehab Backs onto a Recline system.. The Recline Spreader assemblies are available in a wide range of widths for applications on the Mini Maxx PPS and our Adult Maxx PPS.
2022-12-08
Spreader Assy, Matrx Backs (Tilt-Only) - Maxx Style Spreader Assy designed for use with Tilt Canes on Motion Concepts power positioning systems configured with a Tilt function. Maxx Style Tilt-Only Spreader Bar Assy are available in 4 width ranges: 12-16W, 16-22W, 20-26W and 24-30W.
2022-12-08
Maces Back Interface, Recline, Elite Backs (14-18W) - MACES Back Interface Kit includes mounting hardware to affix a Matrx Elite back (width range of 14W-18W) onto a Motion Concepts Power Positioning System with Recline. MACES hardware allows the for full rotational (multi-axis) angle adjustment of the back support.
2022-12-08
Matrx Back Interface Kit, Recline - Matrx Back Recline Interface Kit (includes mounting hardware to affix a Matrx Elite, PB, E2 standard, E2 Mini, and Mini Back onto a Motion Concepts Power Positioning System with Recline canes. Must specify the type of Matrx back being installed (Interface kits vary depending on Back model).
2022-12-08
Matrx Back Interface Kit, Tilt-Only - Matrx Back Interface Kit includes mounting hardware to affix a Matrx Elite, PB or E2 Back onto a Motion Concepts Power Positioning System with Tilt canes. Must specify the type of Matrx back being installed (Interface kits vary slightly depending on Back model).
2022-12-08
Modular Knee Bolster - The Modular Knee Bolster is designed for use with MC Modular Power Standing Systems. The Modular Knee Bolster is height depth and angle adjustable to provide maximum comfort/support for the end user when the wheelchair system is in a standing position.
2022-12-08
Eccentric Knee Bolster - The Eccentric Knee Bolster is designed for use with MC Modular Power Standing Systems. The eccentric bolster allows for independent adjustment of the left and right knee bolster pads to provide maximum comfort/support for the end user when the wheelchair system is in a standing position.
2022-12-08
Quad-Link Swing-Away Joystick Mount Assy. - Quad-Link Swing-Away Joystick Mount Assembly. Components/hardware used to mount the Quad-Link Swing-Away Joystick assembly onto the armrest on a Motion Concepts Power Positioning System. Straight or jogged tube option available. Can be mounted onto Left or Right armrests.
2022-12-08
Maxx Resolve Swing-Away Joystick Mount Assy - Maxx Resolve Swing-Away Joystick Mount Assembly. Components/hardware used to mount the Resolve Swing-Away Joystick assembly onto the armrest on a Motion Concepts Power Positioning System. Straight or jogged tube option available. Can be mounted onto Left or Right armrests
2022-12-08
Fixed Joystick Mount - Fixed Joystick Mount Assembly. Components/hardware used to fix-mount a wheelchair joystick to the armrest on a Motion Concepts Power Positioning System. Straight or jogged tube option available. Can be mounted onto Left or Right armrests.
2022-12-08
Maces Interface Assy, Ride Style Back (Recline) - Ride Style Back, Maces Interface Assembly allows for interfacing of Ride-Style Back Supports onto a Motion Concepts Power Positioning System with Recline. The MACES interface assembly allows for multi-angle back adjustment/set-up around a central pivot point. (limited to system widths: 14W-20W)
2022-12-08
Freedom Seat Interface Plate (Seat Pan) - Freedom Seat Interface Plate allows for interfacing of Freedom Design Seating onto a Motion Concepts Power Positioning System.
2022-12-08
Freedom Back Interface (Recline) - Freedom Back Recline Interface allows for interfacing of Freedom Design Backs onto a Motion Concepts Power Positioning System with Recline. Recessed or Flush Mounting options available.
2022-12-08
Freedom Back Interface (Tilt-Only) - Freedom Back Tilt-Only Interface allows for interfacing of Freedom Design Backs onto a Motion Concepts Power Positioning System with Tilt-Only. Recessed or Flush Mounting options available.
2022-12-08
Fold-Down Back Cane Kit (Pull-Pin) - Optional Fold-Down Back Cane Kit. Pull-Pin design allows the tilt-only back canes to be folded down (forwarded) for ease of transport. (Optional wheelchair component for use with Motion Concepts Power Positioning Systems)
2022-12-08
Mini Tilt-Only Straight Back Canes - Tilt-Only Straight Back Canes (pair) for use on Mini Seating Systems. (available back cane lengths/heights = 14H, 16H, 18H or 20H). Wheelchair components for use on on Motion Concepts Mini Power Positioning Systems with Tilt.
2022-12-08
Med-Adult Tilt-Only Mid-Angle (10°) Back Canes - Tilt-Only Mid-Angle Back canes (pair) designed for use on Med-Adult Systems. Mid-Angle Canes are designed with a 10° mid-angle bend. (back cane height/length options = 18H, 20H, 22H or 24H). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt.
2022-12-08
Med-Adult Tilt-Only Angled (5°) Back Canes - Tilt-Only Angled Back Canes (pair) for use on Medium-Adult Systems Back Canes are designed with a 5° angle bend. (Cane height/length options= 20H, 22H, 24H). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt.
2022-12-08
Med-Adult Tilt-Only Straight Back Canes - "Straight Back Canes (pair) for use on Medium-Adult Systems. (available back cane lengths/heights = 18H, 20H, 22H, 24H, 30""). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt. "
2022-12-08
Adult Mesomorph Tilt Back Canes - "Optional Mesomorph Style Back Canes (pair). Canes are designed to allow mounting of Back Supports wider than nominal system width (Available in 1"", 2"" and 4"" offset). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt. "
2022-12-08
Tilt-Only Mid-Angle Back Canes (10°) - Tilt-Only Mid-Angle Back canes (pair). Mid-Angle Canes are designed with a 10° mid-angle bend. (back cane height/length options = 18H, 20H, 22H or 24H). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt.
2022-12-08