MPS Micro Precision Systems AG

GUDID#

Straight reamer handle - The reamer handles are intended to transmit the rotational speed from a power tool (or a motor) to an acetabular reamer in orthopedic surgery of the hip joint. They are used on adult patient during orthopaedic surgery.
MPS Micro Precision Systems AG
2026-05-27
TRIGEN MAX IM REAMER SHAFT 570 MM, HALL-JACOBS - Intramedullary reamer shaft is used in combination with the Intramedullary reamer head to ream the medullary cavity of long bones in traumatologic or limb lengthening surgery of the femur, tibia and humerus bones where medullary cavities need to be prepared prior to placing a nail. The intramedullary reamers are intended for use with a guide wire to permit to secure the assembly and a surgical drilling machine.The device is reusable.
MPS Micro Precision Systems AG
2026-02-24
TRIGEN MAX ENTRY REAMER 12.5 MM, HALL-JACOBS - Flexible Entry reamer is used to prepare the medullary cavity of humeral bone prior to placing a nail. This is a reusable device.
MPS Micro Precision Systems AG
2026-02-24
TRIGEN MAX IM REAMER SHAFT 570 MM, JACOB-HALL - Intramedullary reamer shaft is used in combination with the Intramedullary reamer head to ream the medullary cavity of long bones in traumatologic or limb lengthening surgery of the femur, tibia and humerus bones where medullary cavities need to be prepared prior to placing a nail. The intramedullary reamers are intended for use with a guide wire to permit to secure the assembly and a surgical drilling machine.The device is reusable.
MPS Micro Precision Systems AG
2025-01-22
TRIGEN MAX ENTRY REAMER 12.5 MM, JACOB-HALL - Flexible Entry reamer is used to prepare the medullary cavity of humeral bone prior to placing a nail. This is a reusable device.
MPS Micro Precision Systems AG
2025-01-22
Offset Cup Impactor 7/16-20 UNF Long = 3mm - Offset cup impactors are to be used to position and seat acetabular cups into the reamed acetabulum during hip joint replacement surgery. The cup impactor is equipped with a suitable connection system to the acetabular cup (e.g. a thread). A hammer is used to deliver the necessary impact to an anvil (or impactor disc) at the rear end of the instrument. This is an reusable device.
MPS Micro Precision Systems AG
2020-08-26
IM reamer shaft dove tail 470 mm, Hudson coup. - T18819
MPS Micro Precision Systems AG
2025-05-30
IM reamer shaft dove tail 470 mm, Stryker/Zimmer-Hall coup. - Intramedullary reamer shaft is used in combination with the Intramedullary reamer head to ream the medullary cavity of long bones in traumatologic or limb lengthening surgery of the femur, tibia and humerus bones where medullary cavities need to be prepared prior to placing a nail. The intramedullary reamers are intended for use with a guide wire to permit to secure the assembly and a surgical drilling machine. The device is reusable.
MPS Micro Precision Systems AG
2025-05-30
IM reamer shaft dove tail 470 mm, Big AO coup. - Intramedullary reamer shaft is used in combination with the Intramedullary reamer head to ream the medullary cavity of long bones in traumatologic or limb lengthening surgery of the femur, tibia and humerus bones where medullary cavities need to be prepared prior to placing a nail. The intramedullary reamers are intended for use with a guide wire to permit to secure the assembly and a surgical drilling machine. The device is reusable.
MPS Micro Precision Systems AG
2025-05-30
Straight guide Ø2 x 820 mm - T18822
MPS Micro Precision Systems AG
2025-05-30
Straight guide Ø3 x 820 mm - T18823
MPS Micro Precision Systems AG
2025-05-30
IM reamer head dove tail Ø9 x 21 mm, can. Ø3.4 mm - T18830
MPS Micro Precision Systems AG
2025-05-30
IM reamer head dove tail Ø10 x 23 mm, can. Ø3.4 mm - T18831
MPS Micro Precision Systems AG
2025-05-30
IM reamer head dove tail Ø11 x 24 mm, can. Ø3.4 mm - T18832
MPS Micro Precision Systems AG
2025-05-30
IM reamer head dove tail Ø12 x 25 mm, can. Ø3.4 mm - T18833
MPS Micro Precision Systems AG
2025-05-30
IM reamer head dove tail Ø13 x 27 mm, can. Ø3.4 mm - T18834
MPS Micro Precision Systems AG
2025-05-30
IM reamer head dove tail Ø14 x 28 mm, can. Ø3.4 mm - T18835
MPS Micro Precision Systems AG
2025-05-30
IM reamer head dove tail Ø15 x 29 mm, can. Ø3.4 mm - T18836
MPS Micro Precision Systems AG
2025-05-30
IM reamer head dove tail Ø16 x 30 mm, can. Ø3.4 mm - T18837
MPS Micro Precision Systems AG
2025-05-30
IM reamer head dove tail Ø17 x 31 mm, can. Ø3.4 mm - T18838
MPS Micro Precision Systems AG
2025-05-30
IM reamer head dove tail Ø18 x 32 mm, can. Ø3.4 mm - T18839
MPS Micro Precision Systems AG
2025-05-30
IM reamer head dove tail Ø19 x 33 mm, can. Ø3.4 mm - T18840
MPS Micro Precision Systems AG
2025-05-30
IM reamer head dove tail Ø20 x 34 mm, can. Ø3.4 mm - T18841
MPS Micro Precision Systems AG
2025-05-30
IM reamer head dove tail Ø21 x 35 mm, can. Ø3.4 mm - T18867
MPS Micro Precision Systems AG
2025-05-30
IM reamer head dove tail Ø22 x 36 mm, can. Ø3.4 mm - T18868
MPS Micro Precision Systems AG
2025-05-30
IM reamer head dove tail Ø23 x 38 mm, can. Ø3.4 mm - T18869
MPS Micro Precision Systems AG
2025-05-30
IM reamer head dove tail Ø24 x 39 mm, can. Ø3.4 mm - T18870
MPS Micro Precision Systems AG
2025-05-30
TRIGEN MAX IM REAMER HEAD 8 MM, FRONT CUTTING - Intramedullary reamer head is used in combination with the Intramedullary reamer shaft to ream the medullary cavity of long bones in traumatologic or limb lengthening surgery of the femur, tibia and humerus bones where medullary cavities need to be prepared prior to placing a nail. The intramedullary reamers are intended for use with a guide wire to permit to secure the assembly and a surgical drilling machine. The device is reusable.
MPS Micro Precision Systems AG
2025-01-22
TRIGEN MAX IM REAMER HEAD 8.5 MM, FRONT CUTTING - Intramedullary reamer head is used in combination with the Intramedullary reamer shaft to ream the medullary cavity of long bones in traumatologic or limb lengthening surgery of the femur, tibia and humerus bones where medullary cavities need to be prepared prior to placing a nail. The intramedullary reamers are intended for use with a guide wire to permit to secure the assembly and a surgical drilling machine. The device is reusable.
MPS Micro Precision Systems AG
2025-01-22
TRIGEN MAX IM REAMER HEAD 9 MM, FRONT CUTTING - Intramedullary reamer head is used in combination with the Intramedullary reamer shaft to ream the medullary cavity of long bones in traumatologic or limb lengthening surgery of the femur, tibia and humerus bones where medullary cavities need to be prepared prior to placing a nail. The intramedullary reamers are intended for use with a guide wire to permit to secure the assembly and a surgical drilling machine. The device is reusable.
MPS Micro Precision Systems AG
2025-01-22
TRIGEN MAX IM REAMER HEAD 9.5 MM, FRONT CUTTING - Intramedullary reamer head is used in combination with the Intramedullary reamer shaft to ream the medullary cavity of long bones in traumatologic or limb lengthening surgery of the femur, tibia and humerus bones where medullary cavities need to be prepared prior to placing a nail. The intramedullary reamers are intended for use with a guide wire to permit to secure the assembly and a surgical drilling machine. The device is reusable.
MPS Micro Precision Systems AG
2025-01-22
TRIGEN MAX IM REAMER HEAD 10 MM, FRONT CUTTING - Intramedullary reamer head is used in combination with the Intramedullary reamer shaft to ream the medullary cavity of long bones in traumatologic or limb lengthening surgery of the femur, tibia and humerus bones where medullary cavities need to be prepared prior to placing a nail. The intramedullary reamers are intended for use with a guide wire to permit to secure the assembly and a surgical drilling machine. The device is reusable.
MPS Micro Precision Systems AG
2025-01-22
TRIGEN MAX IM REAMER HEAD 10.5 MM, FRONT CUTTING - Intramedullary reamer head is used in combination with the Intramedullary reamer shaft to ream the medullary cavity of long bones in traumatologic or limb lengthening surgery of the femur, tibia and humerus bones where medullary cavities need to be prepared prior to placing a nail. The intramedullary reamers are intended for use with a guide wire to permit to secure the assembly and a surgical drilling machine. The device is reusable.
MPS Micro Precision Systems AG
2025-01-22
TRIGEN MAX IM REAMER HEAD 11 MM, FRONT CUTTING - Intramedullary reamer head is used in combination with the Intramedullary reamer shaft to ream the medullary cavity of long bones in traumatologic or limb lengthening surgery of the femur, tibia and humerus bones where medullary cavities need to be prepared prior to placing a nail. The intramedullary reamers are intended for use with a guide wire to permit to secure the assembly and a surgical drilling machine. The device is reusable.
MPS Micro Precision Systems AG
2025-01-22
TRIGEN MAX IM REAMER HEAD 11.5 MM, FRONT CUTTING - Intramedullary reamer head is used in combination with the Intramedullary reamer shaft to ream the medullary cavity of long bones in traumatologic or limb lengthening surgery of the femur, tibia and humerus bones where medullary cavities need to be prepared prior to placing a nail. The intramedullary reamers are intended for use with a guide wire to permit to secure the assembly and a surgical drilling machine. The device is reusable.
MPS Micro Precision Systems AG
2025-01-22
TRIGEN MAX IM REAMER HEAD 12 MM, FRONT CUTTING - Intramedullary reamer head is used in combination with the Intramedullary reamer shaft to ream the medullary cavity of long bones in traumatologic or limb lengthening surgery of the femur, tibia and humerus bones where medullary cavities need to be prepared prior to placing a nail. The intramedullary reamers are intended for use with a guide wire to permit to secure the assembly and a surgical drilling machine. The device is reusable.
MPS Micro Precision Systems AG
2025-01-22
TRIGEN MAX IM REAMER HEAD 12.5 MM, FRONT CUTTING - Intramedullary reamer head is used in combination with the Intramedullary reamer shaft to ream the medullary cavity of long bones in traumatologic or limb lengthening surgery of the femur, tibia and humerus bones where medullary cavities need to be prepared prior to placing a nail. The intramedullary reamers are intended for use with a guide wire to permit to secure the assembly and a surgical drilling machine. The device is reusable.
MPS Micro Precision Systems AG
2025-01-22
TRIGEN MAX IM REAMER HEAD 13 MM, FRONT CUTTING - Intramedullary reamer head is used in combination with the Intramedullary reamer shaft to ream the medullary cavity of long bones in traumatologic or limb lengthening surgery of the femur, tibia and humerus bones where medullary cavities need to be prepared prior to placing a nail. The intramedullary reamers are intended for use with a guide wire to permit to secure the assembly and a surgical drilling machine. The device is reusable.
MPS Micro Precision Systems AG
2025-01-22
TRIGEN MAX IM REAMER HEAD 13.5 MM, FRONT CUTTING - Intramedullary reamer head is used in combination with the Intramedullary reamer shaft to ream the medullary cavity of long bones in traumatologic or limb lengthening surgery of the femur, tibia and humerus bones where medullary cavities need to be prepared prior to placing a nail. The intramedullary reamers are intended for use with a guide wire to permit to secure the assembly and a surgical drilling machine. The device is reusable.
MPS Micro Precision Systems AG
2025-01-22
TRIGEN MAX IM REAMER HEAD 14 MM, FRONT CUTTING - Intramedullary reamer head is used in combination with the Intramedullary reamer shaft to ream the medullary cavity of long bones in traumatologic or limb lengthening surgery of the femur, tibia and humerus bones where medullary cavities need to be prepared prior to placing a nail. The intramedullary reamers are intended for use with a guide wire to permit to secure the assembly and a surgical drilling machine. The device is reusable.
MPS Micro Precision Systems AG
2025-01-22

200 records. Showing 1-40. Next