motionconcepts.comModular Power Standing System
Motion Concepts
MOTION CONCEPTS LP
FDA Registration(s)#
| Registration | FEI | Name | Status | Initial importer | Expiration year | Address |
|---|---|---|---|---|---|---|
| 9615350 | 3001045529 | MOTION CONCEPTS LP | 1 | N | 2026-01-01 | 505 Cityview Blvd Unit#1 Vaughan Ontario CA L4H 0L8 |
GUDID Contact Samples#
| Source GUDID | Product | Phone | |
|---|---|---|---|
| 07540147004002 | Matrx MAC Back Cover - Matrx MAC Back Extra/Replacement Cover. | 1-888-433-6818 | info@motionconcepts.com |
| 07540147004019 | Matrx MAC Back IC Cover - MAC Back Extra/Replacement IC Cover Only | 1-888-433-6818 | info@motionconcepts.com |
| 07540147004026 | MAC SWING AWAY LATERAL W/PAD - "MAC Swing Away Lateral with Pads are designed for using with the Matrx MAC Back. this Swing Away laterals are available in 4 sizes/(XS - 3.25"" x 4.25""; Small (S)- 3.5"" x 5.25""; Medium (M)- 3.75"" x 5.75"" ;and Large(L)- 4.25"" x 6.5""). " | 1-888-433-6818 | info@motionconcepts.com |
| 07540147004033 | Side Mount Headrest Interface Plate - This is an Offset Headrest Mount Kit. The mount allows headrest clamp to be installed in an offset from the back support centerline, with some inch of increments. | 1-888-433-6818 | info@motionconcepts.com |
| 07540147011444 | MODULAR POWER STANDING SYSTEM - Maxx MPSS Stander System | 905-695-0134 | info@motionconcepts.com |
| 07540147011451 | MODULAR POWER STANDING SYSTEM - Maxx MPSS-MINI Stander System | 905-695-0134 | info@motionconcepts.com |
Registered Device Listings#
| Registration key | Listing key | Premarket submission | Device | Product code | Decision date |
|---|---|---|---|---|---|
| 175103 | 1681054788 | K191376 | Modular Power Standing System | IPL | 2019-08-13 |
| 175103 | 1620175619 | K182995 | Bariatric Power Positioning System (BPPS) | ITI | 2019-03-08 |
| 175103 | 1271143521 | K150574 | Modular Power Positioning System | ITI | 2015-06-30 |
| 175103 | 1145495706 | ||||
| 175103 | 1198992130 | ||||
| 175103 | 1258192989 | ||||
| 175103 | 1296313775 | ||||
| 175103 | 1331720681 | ||||
| 175103 | 1591224357 | ||||
| 175103 | 1632620989 | ||||
| 175103 | 1688209815 | ||||
| 175103 | 1852269514 | ||||
| 175103 | 2056417627 |
Product Codes Associated With Registrations#
PMN#
Bariatric Power Positioning System (BPPS)
Motion Concepts
Modular Power Positioning System
MOTION CONCEPTS
TRX VERTICAL POSITIONER
MOTION CONCEPTS
TRZ-CG POWER POSITIONING SYSTEM WITH CENTER-OF-GRAVITY SHIFTING POWER TILT, RECLINE, AND POWER ELEVATING SEAT
MOTION CONCEPTS
TRX-CG POWER TILT AND RECLINE SYSTEM
MOTION CONCEPTS
TRX-CG POWER TILT AND RECLINE SYSTEM
MOTION CONCEPTS
TRX-CG CENTER-OF-GRAVITY SHIFTING POWER TILT AND RECLINE SYSTEMS
MOTION CONCEPTS
TRX POWER TILT AND RECLINE SYSTEM
MOTION CONCEPTS
GUDID#
MAC SWING AWAY LATERAL W/PAD - "MAC Swing Away Lateral with Pads are designed for using with the Matrx MAC Back. this Swing Away laterals are available in 4 sizes/(XS - 3.25"" x 4.25""; Small (S)- 3.5"" x 5.25""; Medium (M)- 3.75"" x 5.75"" ;and Large(L)- 4.25"" x 6.5""). "
2026-05-19
Side Mount Headrest Interface Plate - This is an Offset Headrest Mount Kit. The mount allows headrest clamp to be installed in an offset from the back support centerline, with some inch of increments.
2026-05-19
Matrx MAC Back Cover - Matrx MAC Back Extra/Replacement Cover.
2026-05-08
Matrx MAC Back IC Cover - MAC Back Extra/Replacement IC Cover Only
2026-05-08
MODULAR POWER STANDING SYSTEM - Maxx MPSS Stander System
2021-08-12
MODULAR POWER STANDING SYSTEM - Maxx MPSS-MINI Stander System
2021-08-12
MODULAR POWER POSITIONING SYSTEM - DROP SEAT - MAXX RAIL (50 Deg TILT with MANUAL RECLINE Back)
2025-10-22
MODULAR POWER POSITIONING SYSTEM - "DROP SEAT - MAXX RAIL (45 Deg TILT, with 12"" LIFT and MANUAL RECLINE Back)"
2025-10-22
MODULAR POWER POSITIONING SYSTEM - "DROP SEAT - MAXX RAIL (45 Deg TILT with 10"" LIFT and MANUAL RECLINE Back)"
2025-10-22
MODULAR POWER POSITIONING SYSTEM - REHAB SEAT with MANUAL RECLINE Back
2025-10-22
MODULAR POWER POSITIONING SYSTEM - "REHAB SEAT with 12"" Lift and MANUAL RECLINE Back"
2025-10-22
MODULAR POWER POSITIONING SYSTEM - "REHAB SEAT with 10"" LIFT and MANUAL RECLINE Back"
2025-10-22
Matrx Elite Back Interface Kit for Permobil Tilt/Recline - Interface Kit designed to allow mounting of Matrx Elite Backs onto a Permobil Tilt/Recline wheelchair seating system.
2022-12-08
Matrx Elite Back Interface Kit for Quantum Tilt/Recline - Interface Kit designed to allow mounting of Matrx Elite Backs onto a Quantum (Pride Mobility) Tilt/Recline wheelchair seating system.
2022-12-08
Matrx Elite Back Interface Kit for Quickie Tilt/Recline - Interface Kit designed to allow mounting of Matrx Elite Backs onto a Quickie (Sunrise Medical) Tilt/Recline wheelchair seating system.
2022-12-08
Matrx E2 Back Interface Kit for Permobil Tilt/Recline - Interface Kit designed to allow mounting of Matrx E2 Backs onto a Permobil Tilt/Recline wheelchair seating system.
2022-12-08
Matrx E2 Back Interface Kit for Quantum Tilt/Recline - Interface Kit designed to allow mounting of Matrx E2 Backs onto a Quantum (Pride Mobility) Tilt/Recline wheelchair seating system.
2022-12-08
Matrx E2 Back Interface Kit for Quickie Tilt/Recline - Interface Kit designed to allow mounting of Matrx E2 Backs onto a Quickie (Sunrise Medical) Tilt/Recline wheelchair seating system.
2022-12-08
Tilt-Only Straight Back Canes - Tilt-Only Straight Back Canes (pair). (available back cane lengths/heights = 14H, 16H, 18H, 20H, 22H or 24H). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt.
2022-12-08
Tilt-Only Angled Back Canes (5°) - Tilt-Only Angled Back canes (pair). Back Canes are designed with a 5° angle bend. (Cane height/length options= 20H, 22H, 24H). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt.
2022-12-08
Tilt-Only Endomorph Back Canes - "Tilt-Only Endomorph Back canes (pair). Endomorph Canes are designed to allow for narrower (offset) back mounting. (optional 1"", 2"" or 3"" cane offset available; cane height/length options = 22H or 24H). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt. "
2022-12-08
Tilt-Only Mid-Angle Back Canes (10°) - Tilt-Only Mid-Angle Back canes (pair). Mid-Angle Canes are designed with a 10° mid-angle bend. (back cane height/length options = 18H, 20H, 22H or 24H). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt.
2022-12-08
Adult Mesomorph Tilt Back Canes - "Optional Mesomorph Style Back Canes (pair). Canes are designed to allow mounting of Back Supports wider than nominal system width (Available in 1"", 2"" and 4"" offset). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt. "
2022-12-08
Med-Adult Tilt-Only Straight Back Canes - "Straight Back Canes (pair) for use on Medium-Adult Systems. (available back cane lengths/heights = 18H, 20H, 22H, 24H, 30""). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt. "
2022-12-08
Med-Adult Tilt-Only Angled (5°) Back Canes - Tilt-Only Angled Back Canes (pair) for use on Medium-Adult Systems Back Canes are designed with a 5° angle bend. (Cane height/length options= 20H, 22H, 24H). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt.
2022-12-08
Med-Adult Tilt-Only Mid-Angle (10°) Back Canes - Tilt-Only Mid-Angle Back canes (pair) designed for use on Med-Adult Systems. Mid-Angle Canes are designed with a 10° mid-angle bend. (back cane height/length options = 18H, 20H, 22H or 24H). Wheelchair components for use on on Motion Concepts Power Positioning Systems with Tilt.
2022-12-08
Mini Tilt-Only Straight Back Canes - Tilt-Only Straight Back Canes (pair) for use on Mini Seating Systems. (available back cane lengths/heights = 14H, 16H, 18H or 20H). Wheelchair components for use on on Motion Concepts Mini Power Positioning Systems with Tilt.
2022-12-08
Fold-Down Back Cane Kit (Pull-Pin) - Optional Fold-Down Back Cane Kit. Pull-Pin design allows the tilt-only back canes to be folded down (forwarded) for ease of transport. (Optional wheelchair component for use with Motion Concepts Power Positioning Systems)
2022-12-08
Freedom Back Interface (Tilt-Only) - Freedom Back Tilt-Only Interface allows for interfacing of Freedom Design Backs onto a Motion Concepts Power Positioning System with Tilt-Only. Recessed or Flush Mounting options available.
2022-12-08
Freedom Back Interface (Recline) - Freedom Back Recline Interface allows for interfacing of Freedom Design Backs onto a Motion Concepts Power Positioning System with Recline. Recessed or Flush Mounting options available.
2022-12-08
Freedom Seat Interface Plate (Seat Pan) - Freedom Seat Interface Plate allows for interfacing of Freedom Design Seating onto a Motion Concepts Power Positioning System.
2022-12-08
Maces Interface Assy, Ride Style Back (Recline) - Ride Style Back, Maces Interface Assembly allows for interfacing of Ride-Style Back Supports onto a Motion Concepts Power Positioning System with Recline. The MACES interface assembly allows for multi-angle back adjustment/set-up around a central pivot point. (limited to system widths: 14W-20W)
2022-12-08
Fixed Joystick Mount - Fixed Joystick Mount Assembly. Components/hardware used to fix-mount a wheelchair joystick to the armrest on a Motion Concepts Power Positioning System. Straight or jogged tube option available. Can be mounted onto Left or Right armrests.
2022-12-08
Maxx Resolve Swing-Away Joystick Mount Assy - Maxx Resolve Swing-Away Joystick Mount Assembly. Components/hardware used to mount the Resolve Swing-Away Joystick assembly onto the armrest on a Motion Concepts Power Positioning System. Straight or jogged tube option available. Can be mounted onto Left or Right armrests
2022-12-08
Quad-Link Swing-Away Joystick Mount Assy. - Quad-Link Swing-Away Joystick Mount Assembly. Components/hardware used to mount the Quad-Link Swing-Away Joystick assembly onto the armrest on a Motion Concepts Power Positioning System. Straight or jogged tube option available. Can be mounted onto Left or Right armrests.
2022-12-08
Eccentric Knee Bolster - The Eccentric Knee Bolster is designed for use with MC Modular Power Standing Systems. The eccentric bolster allows for independent adjustment of the left and right knee bolster pads to provide maximum comfort/support for the end user when the wheelchair system is in a standing position.
2022-12-08
Modular Knee Bolster - The Modular Knee Bolster is designed for use with MC Modular Power Standing Systems. The Modular Knee Bolster is height depth and angle adjustable to provide maximum comfort/support for the end user when the wheelchair system is in a standing position.
2022-12-08
Matrx Back Interface Kit, Tilt-Only - Matrx Back Interface Kit includes mounting hardware to affix a Matrx Elite, PB or E2 Back onto a Motion Concepts Power Positioning System with Tilt canes. Must specify the type of Matrx back being installed (Interface kits vary slightly depending on Back model).
2022-12-08
Matrx Back Interface Kit, Recline - Matrx Back Recline Interface Kit (includes mounting hardware to affix a Matrx Elite, PB, E2 standard, E2 Mini, and Mini Back onto a Motion Concepts Power Positioning System with Recline canes. Must specify the type of Matrx back being installed (Interface kits vary depending on Back model).
2022-12-08
Maces Back Interface, Recline, Elite Backs (14-18W) - MACES Back Interface Kit includes mounting hardware to affix a Matrx Elite back (width range of 14W-18W) onto a Motion Concepts Power Positioning System with Recline. MACES hardware allows the for full rotational (multi-axis) angle adjustment of the back support.
2022-12-08