NEWDEAL INTERPHALANGEAL IMPLANT
NEWDEAL SAS
NEWDEAL
PMN#
NEWDEAL COMPRESSION PLATES
NEWDEAL SAS
MODIFIED: NEWDEAL HALLU PLATES
NEWDEAL SAS
PANTA NAIL (DIA. 10MM), PANTA NAIL XL
NEWDEAL SAS
NEWDEAL HALLU LOCK PLATE SYSTEM
NEWDEAL SAS
NEWDEAL COMPRESSION PLATE
NEWDEAL SAS
NEWDEAL TIBIAXYS SYSTEM
NEWDEAL SAS
QWIX POSITIONING SCREW
NEWDEAL SAS
NEWDEAL COMPRESSION PLATE
NEWDEAL SAS
MODIFICATION TO TTC PLATES
NEWDEAL S.A.
MODIFICATION TO LAPIDUS PLATE
NEWDEAL S.A.
LISFRANC PLATE
NEWDEAL S.A.
BASAL DORSAL PLATES
NEWDEAL SAS
LISFRANC PLATE
NEWDEAL S.A.
KALIX II IMPLANT
NEWDEAL S.A.
LARGE UNI-CLIP STAPLE
NEWDEAL S.A.
LAPIDUS PLATE
NEWDEAL S.A.
TTC PLATE
NEWDEAL S.A.
KALIX II IMPLANT, MODEL 141 0XX WITH XX
NEWDEAL S.A.
B-BOP PLATE
NEWDEAL S.A.
NEWDEAL ANKLE NAIL
NEWDEAL S.A.
STABILIZATION SCREW
NEWDEAL S.A.
CALCAMEA PLATE
NEWDEAL S.A.
K-FIX
NEWDEAL S.A.
NEWDEAL K WIRE
NEWDEAL S.A.
HALLU PLATES
NEWDEAL S.A.
MODIFICATION TO THE I.C.O.S SCREW
NEWDEAL S.A.
THE UNI-CLIP STAPLE
NEWDEAL S.A.
MODIFICATION TO THE BOLD SCREW
NEWDEAL S.A.
THE KALIX IMPLANT
NEWDEAL S.A.
I.CO.S SCREW
NEWDEAL S.A.
TAC' PIN
NEWDEAL S.A.
SOLUSTAPLE
NEWDEAL S.A.
SPIN SNAP-OFF SCREW
NEWDEAL S.A.
UNI-CLIP STAPLE
NEWDEAL S.A.
BOLD SCREW
NEWDEAL S.A.
GUDID#
QWIX® - The silicone lid is part of the bases with references 119931ND and 119936ND used in the transport and the sterillization of the QWIX® 3.0-4.3mm screw associated instruments.
2017-05-26
Hallu®-FIX - The stainless steel and radel container is used in the transport and the sterilization of the associated instruments and non sterile implants. It includes one base with reference 129931ND, one HALLU®-C plate rack with reference 129932ND, one HALLU®-S plate rack with reference 129933ND, one HALLU-FIX® screw rack with reference 129936ND and one lid with reference 996200ND.The transport and sterilization containers are not intended to maintain sterility.
2017-05-26
Hallu®-FIX - The radel container is used in the transport and the sterilization of the HALLU® REAM associated instruments. It includes one base with reference 129938ND and one lid with reference 996100ND.The transport and sterilization containers are not intended to maintain sterility.
2017-05-26
ADVANSYS® - The radel container is used in the transport and the sterilization of the associated instruments. It includes one hindfoot instrument tray with reference 169111ND, one cylinder with reference 169104ND, one TTC trial plate module with reference 169105ND, one lid with reference 996200ND and four wedges with reference 119909ND.The transport and sterilization containers are not intended to maintain sterility.
2017-05-26
ADVANSYS® - The stainless steel container is used in the transport and the sterilization of the ADVANSYS® associated instruments. It includes one container with reference 169112ND, one module with reference 169107ND, one cylinder with reference 169106ND and one lid with reference 996200ND.The transport and sterilization containers are not intended to maintain sterility.
2017-05-26
ADVANSYS® - The radel cylinder maintains the K-wires and the drills in the containers used in the transport and the sterilization of the ADVANSYS® associated instruments and non sterile implants.
2017-05-26
ADVANSYS® - The stainless steel TTC plate container is used in the transport and the sterilization of the associated non sterile implants. It includes one base with reference 188211ND, one screw rack with reference 188215ND and one lid with reference 996200ND.The transport and sterilization containers are not intended to maintain sterility.
2017-05-26
ADVANSYS® - The midfoot implant container is used in the transport and the sterilization of the non sterile implants and their associated instruments. It includes one base with reference 188212ND, one screw rack with reference 188216ND, one lid with reference 996200ND and one carpet with reference 188219ND.The transport and sterilization containers are not intended to maintain sterility.
2017-05-26
IPP-ON® - The container is used for transport and sterilization of instruments and non-sterile implants.
2017-05-26
IPP-ON® - The basis is part of the container which product number is 239000ND and that is used for transport and sterilization of instruments and non-steril implants..
2017-05-26
PANTA® - The lid is part of the container which product number is 519900ND and that is used for transport and sterilization of instruments.
2017-05-26
SURFIX® - This tray is used for transport and sterilization of the instruments that are not specific to the osteotomy surgery (drilling guides, length gauge, drills, plate benders, hexagonal screwdriver).
2017-05-26
SURFIX® - This tray is used for transport and sterilization of the instruments that are specific to the osteotomy surgery (cutting guide for opening wedge osteotomy, K-Wire, trial for bone substitute, distractor, bone substitute holder, trial plate).
2017-05-26
SURFIX® - This lid is used to ensure closing of both trays numbers SET000ND and SET100ND.
2017-05-26
SURFIX® - The plate bender (6.5 threaded hole) is used to shape the plate according to the bone configuration.
2017-05-26
SURFIX® - The SURFIX® plate bender is used to bend the SURFIX® osteosynthesis plates to fit the bone configuration without damaging the threaded lipped sockets.
2017-05-26
METIS® - The hexagonal screwdriver is used to implant or explant 2.5mm screws.
2017-05-26
PANTA® - The compression device is part of the system used for the insertion of the nail and to perform compression.
2017-05-31
TIBIAXYS® - The silicone carpet is part of the complete container with reference 159990ND used in the transport and the sterilization of the associated instruments and non sterile implants.
2017-05-26
PANTA XL - The long end cap is made from Titanium alloy and may be inserted into the distal nail threads to prevent tissue ingrowth and facilitate future nail removal.
2017-10-09
PANTA XL - The long end cap is made from Titanium alloy and may be inserted into the distal nail threads to prevent tissue ingrowth and facilitate future nail removal.
2017-10-09
FOREFOOT SOLUTIONS™ - The staple impactor is used to impact the staples to ensure that thay are flush with the bone surface.
2017-05-26
LARGE UNI-CLIP® - The impactor handle assembled with the impactor tip with reference 119321ND, is used to impact the staple in its place.
2017-05-26
LARGE UNI-CLIP® - The impactor tip is assembled with the impactor handle with reference 119319ND. The side of the impactor to be used is determined by the staple size.
2017-05-26
IPP-ON® - The PIP Fusion handle impactor is used to insert the implant in the distal part.
2017-05-26
FOREFOOT SOLUTIONS™ - The staple impactor is used to impact the staples to ensure that thay are flush with the bone surface.
2017-05-26
LARGE UNI-CLIP® - The impactor handle assembled with the impactor tip with reference 119321ND, is used to impact the staple in its place.
2017-05-26
LARGE UNI-CLIP® - The impactor tip is assembled with the impactor handle with reference 119319ND. The side of the impactor to be used is determined by the staple size.
2017-05-26
IPP-ON® - The PIP Fusion handle impactor is used to insert the implant in the distal part.
2017-05-26
PANTA - The end cap is made from Titanium alloy and may be inserted into the distal nail threads to prevent tissue ingrowth and facilitate future nail removal.
2017-10-09
HALLU LOCK - The sterile HALLU Lock plates are available in two different designs (the HALLU Lock S plate and the HALLU Lock C plate) and in different sizes (left/right). They are implanted using Newdeal fixed or variable angle locking system fixation screws and washers. They are both low profile Titanium plates dedicated to the first metatarso-phalangeal arthrodesis. Pre-bending is possible to completely fit the anatomical shape of the joint.
2017-10-09
HALLU LOCK - The sterile HALLU Lock plates are available in two different designs (the HALLU Lock S plate and the HALLU Lock C plate) and in different sizes (left/right). They are implanted using Newdeal fixed or variable angle locking system fixation screws and washers. They are both low profile Titanium plates dedicated to the first metatarso-phalangeal arthrodesis. Pre-bending is possible to completely fit the anatomical shape of the joint.
2017-10-09
HALLU LOCK - The sterile HALLU Lock plates are available in two different designs (the HALLU Lock S plate and the HALLU Lock C plate) and in different sizes (left/right). They are implanted using Newdeal fixed or variable angle locking system fixation screws and washers. They are both low profile Titanium plates dedicated to the first metatarso-phalangeal arthrodesis. Pre-bending is possible to completely fit the anatomical shape of the joint.
2017-10-09
HALLU LOCK - The sterile HALLU Lock plates are available in two different designs (the HALLU Lock S plate and the HALLU Lock C plate) and in different sizes (left/right). They are implanted using Newdeal fixed or variable angle locking system fixation screws and washers. They are both low profile Titanium plates dedicated to the first metatarso-phalangeal arthrodesis. Pre-bending is possible to completely fit the anatomical shape of the joint.
2017-10-09
HALLU LOCK - The sterile HALLU Lock plates are available in two different designs (the HALLU Lock S plate and the HALLU Lock C plate) and in different sizes (left/right). They are implanted using Newdeal fixed or variable angle locking system fixation screws and washers. They are both low profile Titanium plates dedicated to the first metatarso-phalangeal arthrodesis. Pre-bending is possible to completely fit the anatomical shape of the joint.
2017-10-09
HALLU LOCK - The sterile HALLU Lock plates are available in two different designs (the HALLU Lock S plate and the HALLU Lock C plate) and in different sizes (left/right). They are implanted using Newdeal fixed or variable angle locking system fixation screws and washers. They are both low profile Titanium plates dedicated to the first metatarso-phalangeal arthrodesis. Pre-bending is possible to completely fit the anatomical shape of the joint.
2017-10-09
HALLU LOCK - The sterile HALLU Lock plates are available in two different designs (the HALLU Lock S plate and the HALLU Lock C plate) and in different sizes (left/right). They are implanted using Newdeal fixed or variable angle locking system fixation screws and washers. They are both low profile Titanium plates dedicated to the first metatarso-phalangeal arthrodesis. Pre-bending is possible to completely fit the anatomical shape of the joint.
2017-10-09
HALLU LOCK - The sterile HALLU Lock plates are available in two different designs (the HALLU Lock S plate and the HALLU Lock C plate) and in different sizes (left/right). They are implanted using Newdeal fixed or variable angle locking system fixation screws and washers. They are both low profile Titanium plates dedicated to the first metatarso-phalangeal arthrodesis. Pre-bending is possible to completely fit the anatomical shape of the joint.
2017-10-09
HALLU LOCK - The sterile HALLU Lock plates are available in two different designs (the HALLU Lock S plate and the HALLU Lock C plate) and in different sizes (left/right). They are implanted using Newdeal fixed or variable angle locking system fixation screws and washers. They are both low profile Titanium plates dedicated to the first metatarso-phalangeal arthrodesis. Pre-bending is possible to completely fit the anatomical shape of the joint.
2017-10-09
SURFIX - The SURFIX Knee Osteotomy System consists of different stainless steel plates for the proximal tibia and the distal femur with a locking system between the threaded sockets of the plates and the lock screws. Their fixation is provided by titanium alloy screws and lock screws available in two versions : cancellous bone screws diameter 6.5 mm and cortical bone screws diameter 4.5 mm. The system fixation creates a single implant/screw unit fixed into the bone thanks to the lock screw.
2017-10-09