perspectum.comVitruvianScan (v1.0)
Perspectum, Ltd.
PERSPECTUM LTD.
FDA Registration(s)#
| Registration | FEI | Name | Status | Initial importer | Expiration year | Address |
|---|---|---|---|---|---|---|
| 3014232555 | 3014232555 | PERSPECTUM LTD. | 1 | N | 2026-01-01 | Gemini One 5520 John Smith Drive Oxford Oxfordshire GB OX4 2LL |
GUDID Contact Samples#
| Source GUDID | Product | Phone | |
|---|---|---|---|
| B554CSMD1000 | CoverScan - CoverScan is a medical image management and processing software package that allows the display, analysis and post-processing of DICOM compliant medical images and MR data.CoverScan provides both viewing and analysis capabilities to ascertain quantified metrics of multiple organs such as the heart, lungs, liver, spleen, pancreas and kidney.CoverScan provides measurements in different organs to be used for the assessment of longitudinal and transversal relaxation time and rate (T1, SR-T1, cT1, T2), fat content (proton density fat fraction or PDFF) and metrics of organ function (e.g., left ventricular ejection fraction and lung fractional area change on deep inspiration).These metrics derived from the images, when interpreted by a licensed physician, yield information that may assist in diagnosis, clinical management and monitoring of patients.CoverScan is not intended for asymptomatic screening. This device is intended for use with Siemens 1.5T MRI scanners. | +4401865655343 | info@perspectum.com |
| B554CSMD1100 | CoverScan - CoverScan is a medical image management and processing software package that allows the display, analysis and post-processing of DICOM compliant medical images and MR data.CoverScan provides both viewing and analysis capabilities to ascertain quantified metrics of multiple organs such as the heart, lungs, liver, spleen, pancreas and kidney.CoverScan provides measurements in different organs to be used for the assessment of longitudinal and transversal relaxation time and rate (T1, SR-T1, cT1, T2), fat content (proton density fat fraction or PDFF) and metrics of organ function (e.g., left ventricular ejection fraction and lung fractional area change on deep inspiration).These metrics derived from the images, when interpreted by a licensed physician, yield information that may assist in diagnosis, clinical management and monitoring of patients.CoverScan is not intended for asymptomatic screening. This device is intended for use with Siemens 1.5T and 3T MRI scanners. | +4401865655343 | info@perspectum.com |
Registered Device Listings#
| Registration key | Listing key | Premarket submission | Device | Product code | Decision date |
|---|---|---|---|---|---|
| 214514 | 1563043702 | K253413 | LiverMultiScan (v6.0) | LNH | 2026-03-09 |
| 214514 | 1943140593 | K241925 | VitruvianScan (v1.0) | LNH | 2024-10-02 |
| 214514 | 1695095639 | K233930 | MRCP+ version 2 (MRCP+ v2) | LLZ | 2024-03-13 |
| 214514 | 1328175861 | K213960 | LiverMultiScan v5 (LMSv5) | LNH | 2022-09-06 |
| 214514 | 1281612395 | K212565 | CoverScan v1 | LLZ | 2022-05-19 |
| 214514 | 1979987132 | K203280 | Hepatica v1 (Hepatica v1.0.0) | LNH | 2021-01-12 |
| 214514 | 2065676131 | K190017 | LiverMultiScan (LMSv3) | LNH | 2019-06-27 |
| 214514 | 1303639651 | K183133 | MRCP+ v1.0 | LLZ | 2019-01-09 |
| 214514 | 1916226575 | K172685 | LiverMultiScan | LNH | 2017-11-21 |
Product Codes Associated With Registrations#
PMN#
MRCP+ version 2 (MRCP+ v2)
Perspectum
CoverScan (CoverScan v1.1)
Perspectum
LiverMultiScan v5 (LMSv5)
Perspectum
CoverScan V1
Perspectum Ltd.
Hepatica v1 (Hepatica v1.0.0)
Perspectum, Ltd.
LiverMultiScan
Perspectum LTD
LiverMultiScan (LMSv3)
Perspectum Diagnostics Ltd
MRCP+ V1.0
Perspectum Diagnostics Ltd
LiverMultiScan
Perspectum Diagnostics Ltd
GUDID#
CoverScan - CoverScanMD is a standalone, post-processing software as a medical device (SaMD) specifically designed for the processing and analysis of magnetic resonance imaging (MRI) data. It enables the visualisation, analysis and generation of quantitative metrics and composite images from MRI scans.CoverScanMD consists of MultiScan software and a data consolidation software which reads results from compatible SaMD's that are independently authorised for use as medical devices. The data consolidation software compiles all the input data (metrics and image references) and produces a single JSON file output which are then used to generate quantitative multi-parametric MRI reports. The data consolidation software does not modify any input data, instead, it just appends all data into one single JSON file and a list of associated images for report generation. The report generation is done outside the CoverScanMD medical device and hence does not form part of the CoverScanMD medical device. When a referring healthcare professional requests quantitative analysis using CoverScanMD, relevant images are acquired from patients using a single MRI scan at the MR clinic and are transferred to the Perspectum Portal through established secure gateways. Perspectum trained operators use the CoverScanMD software medical device to process the MRI images and produce the quantitative metrics and composite images. The device output information is then sent to the healthcare professionals for their clinical use.CoverScanMD is only used within Perspectum’s secure infrastructure by trained operators to process clinical images and generate metrics. The metrics and composite images output by CoverScanMD are then sent to trained Healthcare Professionals who then interpret the information to make informed decisions.
2025-02-03
CoverScan - CoverScan is a medical image management and processing software package that allows the display, analysis and post-processing of DICOM compliant medical images and MR data.CoverScan provides both viewing and analysis capabilities to ascertain quantified metrics of multiple organs such as the heart, lungs, liver, spleen, pancreas and kidney.CoverScan provides measurements in different organs to be used for the assessment of longitudinal and transversal relaxation time and rate (T1, SR-T1, cT1, T2), fat content (proton density fat fraction or PDFF) and metrics of organ function (e.g., left ventricular ejection fraction and lung fractional area change on deep inspiration).These metrics derived from the images, when interpreted by a licensed physician, yield information that may assist in diagnosis, clinical management and monitoring of patients.CoverScan is not intended for asymptomatic screening. This device is intended for use with Siemens 1.5T and 3T MRI scanners.
2024-11-01
LiverMultiScan - LiverMultiScan v5 (LMSv5) is indicated for use as a magnetic resonance diagnostic device software application for non-invasive liver evaluation that enables the generation, display and review of 2D magnetic resonance medical image data and pixel maps for MR relaxation times. LMSv5 is designed to utilize DICOM 3.0 compliant magnetic resonance image datasets, acquired from compatible MR Systems, to display the internal structure of the abdomen including the liver. Other physical parameters derived from the images may also be produced. LMSv5 provides several tools, such as automated liver segmentation and region of interest (ROI) placements, to be used for the assessment of selected regions of an image. Quantitative assessment of selected regions includes the determination of triglyceride fat fraction in the liver (PDFF), T2*, LIC (Liver Iron Concentration) and iron corrected T1 (cT1) measurements. These images and the physical parameters derived from the images, when interpreted by a trained clinician, yield information that may assist in diagnosis.
2024-11-01
VitruvianScan - VitruvianScan is a standalone, post processing software as a medical device (SaMD). VitruvianScan enables the generation, display and review of magnetic resonance (MR) medical image data from a single timepoint (one patient visit).
2024-11-01
MRCP+ - MRCP+ v2 is a standalone software medical device. The purpose of the MRCP+ v2 device is to assist a trained operator with the quantitative evaluation of biliary system structures acquired from magnetic resonance (MR) images from a single time-point (a patient visit). A Perspectum-trained operator loads previously acquired magnetic resonance cholangiopancreatography (MRCP) data as input into the MRCP+ v2 device. A structured summary report is generated as output by the device, which includes quantitative analysis results and geometric characteristics of the biliary system and pancreatic ducts. The MRCP+ v2 report is intended to facilitate reporting by a radiologist for subsequent interpretation and to aid diagnosis by a physician as part of a panel of testing, including conventional radiological tools.
2024-03-28
CoverScan - CoverScan is a medical image management and processing software package that allows the display, analysis and post-processing of DICOM compliant medical images and MR data.CoverScan provides both viewing and analysis capabilities to ascertain quantified metrics of multiple organs such as the heart, lungs, liver, spleen, pancreas and kidney.CoverScan provides measurements in different organs to be used for the assessment of longitudinal and transversal relaxation time and rate (T1, SR-T1, cT1, T2), fat content (proton density fat fraction or PDFF) and metrics of organ function (e.g., left ventricular ejection fraction and lung fractional area change on deep inspiration).These metrics derived from the images, when interpreted by a licensed physician, yield information that may assist in diagnosis, clinical management and monitoring of patients.CoverScan is not intended for asymptomatic screening. This device is intended for use with Siemens 1.5T MRI scanners.
2022-09-14
LiverMultiScan - LiverMultiScan (LMSv3) is indicated for use as a magnetic resonance diagnostic device software application for non-invasive liver evaluation that enables the generation, display and review of 2D magnetic resonance medical image data and pixel maps for MR relaxation times. LiverMultiScan (LMSv3) is designed to utilize DICOM 3.0 compliant magnetic resonance image datasets, acquired from compatible MR Systems, to display the internal structure of the abdomen including the liver. Other physical parameters derived from the images may also be produced. LiverMultiScan (LMSv3) provides a number of tools, such as automated liver segmentation and region of interest (ROI) placements, to be used for the assessment of selected regions of an image. Quantitative assessment of selected regions includes the determination of triglyceride fat fraction in the liver (PDFF), T2* and iron-corrected T1 (cT1) measurements. PDFF may optionally be computed using the LMS IDEAL or three-point Dixon methodology.These images and the physical parameters derived from the images, when interpreted by a trained clinician, yield information that may assist in diagnosis.
2022-09-14
LiverMultiScan - LiverMultiScan (LMSv4) is indicated for use as a magnetic resonance diagnostic device software application for non-invasive liver evaluation that enables the generation, display and review of 2D magnetic resonance medical image data and pixel maps for MR relaxation times. LiverMultiScan (LMSv4) is designed to utilize DICOM 3.0 compliant magnetic resonance image datasets, acquired from compatible MR Systems, to display the internal structure of the abdomen including the liver. Other physical parameters derived from the images may also be produced. LiverMultiScan (LMSv4) provides a number of tools, such as automated liver segmentation and region of interest (ROI) placements, to be used for the assessment of selected regions of an image. Quantitative assessment of selected regions includes the determination of triglyceride fat fraction in the liver (PDFF), T2* and iron-corrected T1 (cT1) measurements. T2* may optionally be computed using the DIXON or LMS MOST methodologies. These images and the physical parameters derived from the images, when interpreted by a trained clinician, yield information that may assist in diagnosis.
2022-09-14
LiverMultiScan - LiverMultiScan v5 (LMSv5) is indicated for use as a magnetic resonance diagnostic device software application for non-invasive liver evaluation that enables the generation, display and review of 2D magnetic resonance medical image data and pixel maps for MR relaxation times. LMSv5 is designed to utilize DICOM 3.0 compliant magnetic resonance image datasets, acquired from compatible MR Systems, to display the internal structure of the abdomen including the liver. Other physical parameters derived from the images may also be produced. LMSv5 provides several tools, such as automated liver segmentation and region of interest (ROI) placements, to be used for the assessment of selected regions of an image. Quantitative assessment of selected regions includes the determination of triglyceride fat fraction in the liver (PDFF), T2*, LIC (Liver Iron Concentration) and iron corrected T1 (cT1) measurements. These images and the physical parameters derived from the images, when interpreted by a trained clinician, yield information that may assist in diagnosis.
2022-09-14
Hepatica - Hepatica (Hepatica v1) is a post-processing medical device software that presents quantified metrics which may contribute to the assessment of a patient’s liver health.Hepatica (Hepatica v1) uses image visualisation and analysis tools to process DICOM 3.0 compliant magnetic resonance image datasets to produce semi-automatic segmented 3D models of the liver based on the work of Couinaud and the Brisbane 2000 terminology. For each identified Couinaud segment, volumetric data is determined and reported. Hepatica (Hepatica v1) may also report iron corrected-T1 (cT1) and PDFF calculated using the IDEAL methodfrom multi-slice acquisitions, on a per segment basis, over the whole liver. Both metrics present numerical values of different fundamental liver tissue characteristics that can be used as measures of liver tissue health.Hepatica (Hepatica v1) provides trained clinicians with additional information to evaluate the volume and health of a patient’s liver on a segmental basis. It is not intended to replace the established procedures for the assessment of a patient’s liver health. However, information gathered through existing diagnostic tests, clinical evaluation of the patient, as well Hepatica(Hepatica v1), may support surgical decision making.
2021-02-12
LiverMultiScan - LiverMultiScan (LMSv3) is indicated for use as a magnetic resonance diagnostic device software application for non-invasive liver evaluation that enables the generation, display and review of 2D magnetic resonance medical image data and pixel maps for MR relaxation times. LiverMultiScan (LMSv3) is designed to utilize DICOM 3.0 compliant magnetic resonance image datasets, acquired from compatible MR Systems, to display the internal structure of the abdomen including the liver. Other physical parameters derived from the images may also be produced. LiverMultiScan (LMSv3) provides a number of tools, such as automated liver segmentation and region of interest (ROI) placements, to be used for the assessment of selected regions of an image. Quantitative assessment of selected regions includes the determination of triglyceride fat fraction in the liver (PDFF), T2* and iron-corrected T1 (cT1) measurements. PDFF may optionally be computed using the LMS IDEAL or three-point Dixon methodology.These images and the physical parameters derived from the images, when interpreted by a trained clinician, yield information that may assist in diagnosis.
2020-11-03
LiverMultiScan - LiverMultiScan (LMSv3) is indicated for use as a magnetic resonance diagnostic device software application for non-invasive liver evaluation that enables the generation, display and review of 2D magnetic resonance medical image data and pixel maps for MR relaxation times. LiverMultiScan (LMSv3) is designed to utilize DICOM 3.0 compliant magnetic resonance image datasets, acquired from compatible MR Systems, to display the internal structure of the abdomen including the liver. Other physical parameters derived from the images may also be produced. LiverMultiScan (LMSv3) provides a number of tools, such as automated liver segmentation and region of interest (ROI) placements, to be used for the assessment of selected regions of an image. Quantitative assessment of selected regions includes the determination of triglyceride fat fraction in the liver (PDFF), T2* and iron-corrected T1 (cT1) measurements. PDFF may optionally be computed using the LMS IDEAL or three-point Dixon methodology.These images and the physical parameters derived from the images, when interpreted by a trained clinician, yield information that may assist in diagnosis.
2020-03-20
LiverMultiScan - LiverMultiScan (LMSv3) is indicated for use as a magnetic resonance diagnostic device software application for non-invasive liver evaluation that enables the generation, display and review of 2D magnetic resonance medical image data and pixel maps for MR relaxation times. LiverMultiScan (LMSv3) is designed to utilize DICOM 3.0 compliant magnetic resonance image datasets, acquired from compatible MR Systems, to display the internal structure of the abdomen including the liver. Other physical parameters derived from the images may also be produced. LiverMultiScan (LMSv3) provides a number of tools, such as automated liver segmentation and region of interest (ROI) placements, to be used for the assessment of selected regions of an image. Quantitative assessment of selected regions includes the determination of triglyceride fat fraction in the liver (PDFF), T2* and iron-corrected T1 (cT1) measurements. PDFF may optionally be computed using the LMS IDEAL or three-point Dixon methodology.These images and the physical parameters derived from the images, when interpreted by a trained clinician, yield information that may assist in diagnosis.
2020-01-13
LiverMultiScan - LiverMultiScan (LMSv3) is a standalone software device. The purpose of the LiverMultiScan (LMSv3) device is to assist the trained operator with the evaluation of information from Magnetic Resonance (MR) images from a single time-point (patient visit). The LiverMultiScan (LMSv3) is a post-processing software device, a trained operator uses tools such as automatic liver segmentation and region of interest placement upon previously acquired MR images, from which a summary report is generated. The summary report is then sent to an interpreting clinician.The interpreting clinician needs to take into consideration the device’s limitations and accuracy during clinical interpretation.LiverMultiScan (LMSv3) is not intended to replace the established procedures for the assessment of a patients liver health by an interpreting clinician, providing many opportunities for competent human intervention in the interpretation of images and information displayed.The device is intended to be used by a trained operator to generate metrics for subsequent interpretation by a clinician.The metrics are intended to be used as an additional diagnostic input to provide information to clinicians as part of a wider diagnostic process. It is expected that in the normal course of liver disease diagnosis, patients will present with clinical symptoms or risk factors which may indicate liver disease.Liver function tests, blood tests, ultrasound scanning as well as liver biopsy are all expected to be used at the discretion of a qualified clinician in addition to information obtained from the use of LiverMultiScan (LMSv3) metrics. The purpose of a LiverMultiScan (LMSv3) metrics is to provide imaging information to assist in characterizing tissue in the liver, which are additional to existing methods for obtaining information relating to the liver. LiverMultiScan (LMSv3) metrics are not intended to replace any existing diagnostic source of information, but can be used to identify patients who
2019-09-17
LiverMultiScan - LiverMultiScan is a standalone software device. The purpose of the LiverMultiScan device is to assist the trained operator with the evaluation of information from Magnetic Resonance (MR) images from a single time-point (patient visit). A trained operator places circular regions of interest drawn upon previously acquired MR images, from which a summary report is generated. The summary report is sent to an interpreting clinician. LiverMultiScan does not replace the usual procedures for assessment of the liver by an interpreting clinician, providing many opportunities for competent human intervention in the interpretation of images and information displayed. The metrics are intended to be used as an additional diagnostic input to provide information to clinicians as part of a wider diagnostic process. It is expected that in the normal course of liver disease diagnosis, patients will present with clinical symptoms or risk factors which may indicate liver disease.Liver function tests, blood tests, ultrasound scanning as well as liver biopsy are all expected to be used at the discretion of a qualified clinician in addition to information obtained from the use of LiverMultiScan metrics. The purpose of LiverMultiScan metrics are to provide imaging information to assist in characterising tissue in the liver, which is additional to existing methods for obtaining information relating to the liver. LiverMultiScan metrics do not replace any existing diagnostic source of information, but can be used to identify patients who may benefit most from further evaluation, including biopsy. Information gathered through existing diagnostic tests and clinical evaluation of the patient, as well as information obtained from LiverMultiScan metrics, may contribute to a diagnostic decision.
2018-07-04
MRCP+ - MRCP+v1 is indicated for use as a software-based image processing system for non-invasive, quantitative assessment of biliary system structures by facilitating the generation, visualisation and review of three-dimensional quantitative biliary system models and anatomical image data.MRCP+v1 calculates quantitative three-dimensional biliary system models that enable measurement of bile duct widths and automatic detection of regions of variation (ROV) of tubular structures. MRCP+v1 includes tools for interactive segmentation and labelling of the biliary system and tubular structures. MRCP+v1 allows for regional volumetric analysis of segmented tree-like, tubular structures and the gallbladder.Combining image viewing, processing and reporting tools, the metrics provided is designed to support physicians in the visualization, evaluation and reporting of hepatobiliary structures. These models and the physical parameters derived from the models, when interpreted by a trained physician, yield information that may assist in biliary system assessment.MRCP+v1 is designed to utilize DICOM compliant MRCP datasets, acquired on supported MR scanners using supported MRCP acquisition protocols.MRCP+v1 is suitable for all patients not contra-indicated for MRI.
2019-02-04
LiverMultiScan - LiverMultiScan is a standalone software device. The purpose of the LiverMultiScan device is to assist the trained operator with the evaluation of information from Magnetic Resonance (MR) images from a single time-point (patient visit). A trained operator places circular regions of interest drawn upon previously acquired MR images, from which a summary report is generated. The summary report is sent to an interpreting clinician. LiverMultiScan does not replace the usual procedures for assessment of the liver by an interpreting clinician, providing many opportunities for competent human intervention in the interpretation of images and information displayed. The metrics are intended to be used as an additional diagnostic input to provide information to clinicians as part of a wider diagnostic process. It is expected that in the normal course of liver disease diagnosis, patients will present with clinical symptoms or risk factors which may indicate liver disease.Liver function tests, blood tests, ultrasound scanning as well as liver biopsy are all expected to be used at the discretion of a qualified clinician in addition to information obtained from the use of LiverMultiScan metrics. The purpose of LiverMultiScan metrics are to provide imaging information to assist in characterising tissue in the liver, which is additional to existing methods for obtaining information relating to the liver. LiverMultiScan metrics do not replace any existing diagnostic source of information, but can be used to identify patients who may benefit most from further evaluation, including biopsy. Information gathered through existing diagnostic tests and clinical evaluation of the patient, as well as information obtained from LiverMultiScan metrics, may contribute to a diagnostic decision.
2018-01-26