Sectra Digital Pathology Module (Version 3.3)
Sectra AB
Sectra AB
PMN#
GUDID#
Sectra Orthopedic Package - Sectra Orthopaedic Package is intended to assist the user when doing preoperative planning, making musculoskeletal (MSK) measurements and post-operative follow-up. The device has functionality in both 2D and 3D for viewing prosthesis templates on radiological images, tools for repositioning bones and templates, and tools for measurements in the images. For example the Sectra Orthopaedic Package shall: • Assist the orthopaedic surgeons in choosing which implants to use. • Assist the orthopaedic surgeons in choosing where to place cut lines etc. • Assist the orthopaedic surgeons in following-up of surgical procedures. • Assist the orthopaedic surgeon in planning trauma, joint, spine and deformity surgery. • Assist the radiologist in making MSK measurements. • Assist the user in producing outputs for post-processing such as 3D prints of anatomical models. Typical users of this system are trained professionals, for example orthopaedic surgeons, physicians, and radiologists.
2026-09-06
Sectra Workstation - Sectra Workstation is a software-only device intended for the display, manipulation and diagnostic review of medical images (e.g. DICOM, jpeg, mpeg) and other related medical information.Sectra Workstation can show images from different sources and can interface with various image storage and printing devices.Sectra Workstation is intended for use with Sectra Core for storage and retrieval of medical images and other related medical information.Areas of application include e.g. radiology, cardiology and ophthalmology.Lossy compressed radiological images and DICOM “for processing” images are not intended for diagnostic review.Only for the United States: Mammographic images must be reviewed on a monitor approved by FDA for this purpose.Sectra UniView, the web-based model of Sectra Workstation, is primarily intended for reference viewing on both stationary and mobile platforms. Sectra UniView is not intended for replacing a full diagnostic workstation but it can be used on stationary platforms for diagnostic review of medical images except mammograms.For diagnostic review of radiological images full image quality mode must be used.Typical users of Sectra Workstation are trained medical professionals such as physicians, radiologists, nurses, medical technicians and assistants.The user is responsible for the quality, accuracy and adequacy of all information imported or entered into Sectra Workstation, whether it is videos, photographs, audio or text. Further, the user is responsible for the clinical adequacy of the viewing device used, e.g. size, resolution and contrast.
2026-05-12
Sectra Digital Pathology Module - For In Vitro Diagnostic UseSectra Digital Pathology Module (3.3) is a software device intended for viewing and management of digital images of scanned surgical pathology slides prepared from formalin-fixed paraffin embedded (FFPE) tissue. It is an aid to the pathologist to review and interpret these digital images for the purposes of primary diagnosis.Sectra Digital Pathology Module (3.3) is not intended for use with frozen section, cytology, or non-FFPE hematopathology specimens.It is the responsibility of the pathologist to employ appropriate procedures and safeguards to assure the validity of the interpretation of images using Sectra Digital Pathology Module. Sectra Digital Pathology Module (3.3) is intended for use with Leica’s Aperio GT 450 DX scanner and Dell U3223QE display, for viewing and management of the ScanScope Virtual Slide (SVS) and Digital Imaging and Communications in Medicine (DICOM) image formats.
2026-05-12
Sectra Orthopedic Package - Sectra Orthopaedic Package is intended to assist the user when doing preoperative planning, making musculoskeletal (MSK) measurements and post-operative follow-up. The device has functionality in both 2D and 3D for viewing prosthesis templates on radiological images, tools for repositioning bones and templates, and tools for measurements in the images.For example the Sectra Orthopaedic Package shall:• Assist the orthopaedic surgeons in choosing which implants to use.• Assist the orthopaedic surgeons in choosing where to place cut lines etc.• Assist the orthopaedic surgeons in following-up of surgical procedures.• Assist the orthopaedic surgeon in planning trauma, joint, spine and deformity surgery.• Assist the radiologist in making MSK measurements.• Assist the user in producing outputs for post-processing such as 3D prints of anatomical models.Typical users of this system are trained professionals, for example orthopaedic surgeons, physicians, and radiologists.
2026-03-05
Sectra Workstation - Sectra Workstation is a software-only device intended for the display, manipulation and diagnostic review of medical images (e.g. DICOM, jpeg, mpeg) and other related medical information.Sectra Workstation can show images from different sources and can interface with various image storage and printing devices.Sectra Workstation is intended for use with Sectra Core for storage and retrieval of medical images and other related medical information.Areas of application include e.g. radiology, cardiology and ophthalmology.Lossy compressed radiological images and DICOM “for processing” images are not intended for diagnostic review.Only for the United States: Mammographic images must be reviewed on a monitor approved by FDA for this purpose.Sectra UniView, the web-based model of Sectra Workstation, is primarily intended for reference viewing on both stationary and mobile platforms. Sectra UniView is not intended for replacing a full diagnostic workstation but it can be used on stationary platforms for diagnostic review of medical images except mammograms.For diagnostic review of radiological images full image quality mode must be used.Typical users of Sectra Workstation are trained medical professionals such as physicians, radiologists, nurses, medical technicians and assistants.The user is responsible for the quality, accuracy and adequacy of all information imported or entered into Sectra Workstation, whether it is videos, photographs, audio or text. Further, the user is responsible for the clinical adequacy of the viewing device used, e.g. size, resolution and contrast.
2025-10-27
Sectra Orthopedic Package - Sectra Orthopaedic Package is intended to assist the user when doing preoperative planning, making musculoskeletal (MSK) measurements and post-operative follow-up. The device has functionality in both 2D and 3D for viewing prosthesis templates on radiological images, tools for repositioning bones and templates, and tools for measurements in the images.For example the Sectra Orthopaedic Package shall:• Assist the orthopaedic surgeons in choosing which implants to use.• Assist the orthopaedic surgeons in choosing where to place cut lines etc.• Assist the orthopaedic surgeons in following-up of surgical procedures.• Assist the orthopaedic surgeon in planning trauma, joint, spine and deformity surgery.• Assist the radiologist in making MSK measurements.• Assist the user in producing outputs for post-processing such as 3D prints of anatomical models.Typical users of this system are trained professionals, for example orthopaedic surgeons, physicians, and radiologists.
2025-07-17
Sectra Digital Pathology Module - For In Vitro Diagnostic UseSectra Digital Pathology Module (3.3) is a software device intended for viewing and management of digital images of scanned surgical pathology slides prepared from formalin-fixed paraffin embedded (FFPE) tissue. It is an aid to the pathologist to review and interpret these digital images for the purposes of primary diagnosis.Sectra Digital Pathology Module (3.3) is not intended for use with frozen section, cytology, or non-FFPE hematopathology specimens.It is the responsibility of the pathologist to employ appropriate procedures and safeguards to assure the validity of the interpretation of images using Sectra Digital Pathology Module. Sectra Digital Pathology Module (3.3) is intended for use with Leica’s Aperio GT 450 DX scanner and Dell U3223QE display, for viewing and management of the ScanScope Virtual Slide (SVS) and Digital Imaging and Communications in Medicine (DICOM) image formats.
2025-04-09
Sectra Workstation - Sectra Workstation is intended for the display, manipulation and diagnostic review of medical images (e.g. DICOM, jpeg, mpeg) and other related medical information. It can show images from different sources and interface with various image storage and printing devices. Areas of application include e.g. radiology, cardiology and ophthalmology.Typical users are trained medical professionals, including, but not limited to physicians, radiologists, nurses, medical technicians and assistants.Lossy compressed radiological images and DICOM “for processing” images are not intended for diagnostic review.Only for the United States:- Mammographic images must be reviewed on a monitor approved by FDA for this purpose.Sectra UniView, the web-based model of Sectra Workstation, is primarily intended for reference viewing on both stationary and mobile platforms. It is not intended for replacing a full diagnostic workstation but it can be used on stationary platforms for diagnostic review of medical images except mammograms. For diagnostic review of radiological images full image quality mode must be used.The user is responsible for the quality, accuracy and adequacy of all information imported or entered into Sectra Workstation, whether it is videos, photographs, audio or text. Further, the user is responsible for the clinical adequacy of the viewing device used e.g. size, resolution and contrast.
2025-04-08
Sectra Orthopedic Package - Sectra Orthopaedic Package is intended to assist the user when doing preoperative planning, making musculoskeletal (MSK) measurements and post-operative follow-up. The device has functionality in both 2D and 3D for viewing prosthesis templates on radiological images, tools for repositioning bones and templates, and tools for measurements in the images.For example the Sectra Orthopaedic Package shall:• Assist the orthopaedic surgeons in choosing which implants to use.• Assist the orthopaedic surgeons in choosing where to place cut lines etc.• Assist the orthopaedic surgeons in following-up of surgical procedures.• Assist the orthopaedic surgeon in planning trauma, joint, spine and deformity surgery.• Assist the radiologist in making MSK measurements.• Assist the user in producing outputs for post-processing such as 3D prints of anatomical models.Typical users of this system are trained professionals, for example orthopaedic surgeons, physicians, and radiologists.
2025-01-12
Sectra Digital Pathology Module - For In Vitro Diagnostic UseSectra Digital Pathology Module (3.3) is a software device intended for viewing and management of digital images of scanned surgical pathology slides prepared from formalin-fixed paraffin embedded (FFPE) tissue. It is an aid to the pathologist to review and interpret these digital images for the purposes of primary diagnosis.Sectra Digital Pathology Module (3.3) is not intended for use with frozen section, cytology, or non-FFPE hematopathology specimens.It is the responsibility of the pathologist to employ appropriate procedures and safeguards to assure the validity of the interpretation of images using Sectra Digital Pathology Module. Sectra Digital Pathology Module (3.3) is intended for use with Leica’s Aperio GT 450 DX scanner and Dell U3223QE display, for viewing and management of the ScanScope Virtual Slide (SVS) and Digital Imaging and Communications in Medicine (DICOM) image formats.
2024-10-11
Sectra Workstation - Sectra Workstation is intended for the display, manipulation and diagnostic review of medical images (e.g. DICOM, jpeg, mpeg) and other related medical information. It can show images from different sources and interface with various image storage and printing devices. Areas of application include e.g. radiology, cardiology and ophthalmology.Typical users are trained medical professionals, including, but not limited to physicians, radiologists, nurses, medical technicians and assistants.Lossy compressed radiological images and DICOM “for processing” images are not intended for diagnostic review.Only for the United States:- Mammographic images must be reviewed on a monitor approved by FDA for this purpose.Sectra UniView, the web-based model of Sectra Workstation, is primarily intended for reference viewing on both stationary and mobile platforms. It is not intended for replacing a full diagnostic workstation but it can be used on stationary platforms for diagnostic review of medical images except mammograms. For diagnostic review of radiological images full image quality mode must be used.The user is responsible for the quality, accuracy and adequacy of all information imported or entered into Sectra Workstation, whether it is videos, photographs, audio or text. Further, the user is responsible for the clinical adequacy of the viewing device used e.g. size, resolution and contrast.
2024-10-11
Sectra Orthopedic Package - Sectra Orthopaedic Package is intended to assist the user when doing preoperative planning, making musculoskeletal (MSK) measurements and post-operative follow-up. The device has functionality in both 2D and 3D for viewing prosthesis templates on radiological images, tools for repositioning bones and templates, and tools for measurements in the images.For example the Sectra Orthopaedic Package shall:• Assist the orthopaedic surgeons in choosing which implants to use.• Assist the orthopaedic surgeons in choosing where to place cut lines etc.• Assist the orthopaedic surgeons in following-up of surgical procedures.• Assist the orthopaedic surgeon in planning trauma, joint, spine and deformity surgery.• Assist the radiologist in making MSK measurements.• Assist the user in producing outputs for post-processing such as 3D prints of anatomical models.Typical users of this system are trained professionals, for example orthopaedic surgeons, physicians, and radiologists.
2024-08-21
Sectra Workstation - Sectra Workstation is intended for the display, manipulation and diagnostic review of medical images (e.g. DICOM, jpeg, mpeg) and other related medical information. It can show images from different sources and interface with various image storage and printing devices. Areas of application include e.g. radiology, cardiology and ophthalmology.Typical users are trained medical professionals, including, but not limited to physicians, radiologists, nurses, medical technicians and assistants.Lossy compressed radiological images and DICOM “for processing” images are not intended for diagnostic review.Only for the United States:- Mammographic images must be reviewed on a monitor approved by FDA for this purpose.Sectra UniView, the web-based model of Sectra Workstation, is primarily intended for reference viewing on both stationary and mobile platforms. It is not intended for replacing a full diagnostic workstation but it can be used on stationary platforms for diagnostic review of medical images except mammograms. For diagnostic review of radiological images full image quality mode must be used.The user is responsible for the quality, accuracy and adequacy of all information imported or entered into Sectra Workstation, whether it is videos, photographs, audio or text. Further, the user is responsible for the clinical adequacy of the viewing device used e.g. size, resolution and contrast.
2024-06-04
Sectra Digital Pathology Module - For In Vitro Diagnostic UseSectra Digital Pathology Module device is a software intended for viewing and management of digital images of scanned surgical pathology slides prepared from formalin-fixed paraffin embedded (FFPE) tissue. It is an aid to the pathologist to review and interpret these digital images for the purposes of primary diagnosis.Sectra Digital Pathology Module is not intended for use with frozen section, cytology, or non-FFPE hematopathology specimens.It is the responsibility of the pathologist to employ appropriate procedures and safeguards to assure the validity of the interpretation of images using Sectra Digital Pathology Module.Sectra Digital Pathology Module is intended for use with Leica's Aperio AT2 DX scanner and Dell MR2416 monitor.
2024-05-07
Sectra Orthopedic Package - Sectra Orthopaedic Package is intended to assist the user when doing preoperative planning, making musculoskeletal (MSK) measurements and post-operative follow-up. The device has functionality in both 2D and 3D for viewing prosthesis templates on radiological images, tools for repositioning bones and templates, and tools for measurements in the images.For example the Sectra Orthopaedic Package shall:• Assist the orthopaedic surgeons in choosing which implants to use.• Assist the orthopaedic surgeons in choosing where to place cut lines etc.• Assist the orthopaedic surgeons in following-up of surgical procedures.• Assist the orthopaedic surgeon in planning trauma, joint, spine and deformity surgery.• Assist the radiologist in making MSK measurements.• Assist the user in producing outputs for post-processing such as 3D prints of anatomical models.Typical users of this system are trained professionals, for example orthopaedic surgeons, physicians, and radiologists.
2024-01-02
Sectra Digital Pathology Module - For In Vitro Diagnostic UseSectra Digital Pathology Module device is a software intended for viewing and management of digital images of scanned surgical pathology slides prepared from formalin-fixed paraffin embedded (FFPE) tissue. It is an aid to the pathologist to review and interpret these digital images for the purposes of primary diagnosis.Sectra Digital Pathology Module is not intended for use with frozen section, cytology, or non-FFPE hematopathology specimens.It is the responsibility of the pathologist to employ appropriate procedures and safeguards to assure the validity of the interpretation of images using Sectra Digital Pathology Module.Sectra Digital Pathology Module is intended for use with Leica's Aperio AT2 DX scanner and Dell MR2416 monitor.
2023-11-13
Sectra Workstation - Sectra Workstation is intended for the display, manipulation and diagnostic review of medical images (e.g. DICOM, jpeg, mpeg) and other related medical information. It can show images from different sources and interface with various image storage and printing devices. Areas of application include e.g. radiology, cardiology and ophthalmology.Typical users are trained medical professionals, including, but not limited to physicians, radiologists, nurses, medical technicians and assistants.Lossy compressed radiological images and DICOM “for processing” images are not intended for diagnostic review.Only for the United States:- Mammographic images must be reviewed on a monitor approved by FDA for this purpose.Sectra UniView, the web-based model of Sectra Workstation, is primarily intended for reference viewing on both stationary and mobile platforms. It is not intended for replacing a full diagnostic workstation but it can be used on stationary platforms for diagnostic review of medical images except mammograms. For diagnostic review of radiological images full image quality mode must be used.The user is responsible for the quality, accuracy and adequacy of all information imported or entered into Sectra Workstation, whether it is videos, photographs, audio or text. Further, the user is responsible for the clinical adequacy of the viewing device used e.g. size, resolution and contrast.
2023-11-12
Sectra Workstation - Sectra Workstation is intended for the display, manipulation and diagnostic review of medical images (e.g. DICOM, jpeg, mpeg) and other related medical information. It can show images from different sources and interface with various image storage and printing devices. Areas of application include e.g. radiology, cardiology and ophthalmology.Typical users are trained medical professionals, including, but not limited to physicians, radiologists, nurses, medical technicians and assistants.Lossy compressed radiological images and DICOM “for processing” images are not intended for diagnostic review.Only for the United States:- Mammographic images must be reviewed on a monitor approved by FDA for this purpose.Sectra UniView, the web-based model of Sectra Workstation, is primarily intended for reference viewing on both stationary and mobile platforms. It is not intended for replacing a full diagnostic workstation but it can be used on stationary platforms for diagnostic review of medical images except mammograms. For diagnostic review of radiological images full image quality mode must be used.The user is responsible for the quality, accuracy and adequacy of all information imported or entered into Sectra Workstation, whether it is videos, photographs, audio or text. Further, the user is responsible for the clinical adequacy of the viewing device used e.g. size, resolution and contrast.
2023-06-21
Sectra Digital Pathology Module - For In Vitro Diagnostic UseSectra Digital Pathology Module device is a software intended for viewing and management of digital images of scanned surgical pathology slides prepared from formalin-fixed paraffin embedded (FFPE) tissue. It is an aid to the pathologist to review and interpret these digital images for the purposes of primary diagnosis.Sectra Digital Pathology Module is not intended for use with frozen section, cytology, or non-FFPE hematopathology specimens.It is the responsibility of the pathologist to employ appropriate procedures and safeguards to assure the validity of the interpretation of images using Sectra Digital Pathology Module.Sectra Digital Pathology Module is intended for use with Leica's Aperio AT2 DX scanner and Dell MR2416 monitor.
2023-06-21
Sectra Orthopedic Package - Sectra Orthopaedic Package is intended to assist the user when doing preoperative planning, making musculoskeletal (MSK) measurements and post-operative follow-up. The device has functionality in both 2D and 3D for viewing prosthesis templates on radiological images, tools for repositioning bones and templates, and tools for measurements in the images.For example the Sectra Orthopaedic Package shall:• Assist the orthopaedic surgeons in choosing which implants to use.• Assist the orthopaedic surgeons in choosing where to place cut lines etc.• Assist the orthopaedic surgeons in following-up of surgical procedures.• Assist the orthopaedic surgeon in planning trauma, joint, spine and deformity surgery.• Assist the radiologist in making MSK measurements.• Assist the user in producing outputs for post-processing such as 3D prints of anatomical models.Typical users of this system are trained professionals, for example orthopaedic surgeons, physicians, and radiologists.
2023-06-21
Sectra Calibration Unit - The Sectra Calibration Unit consists of calibration holders and markers.The calibration holders are intended to correctly place the calibration markers in relation to the patient during image acquisition.The calibration markers will be visible on the x-ray images and are intended to serve as scaling references.Typical users of the device are trained professionals, for example radiology technicians.
2022-11-07
Sectra Orthopedic Package - Sectra Orthopaedic Package is intended to assist the user when doing preoperative planning, making musculoskeletal (MSK) measurements and post-operative follow-up. The device has functionality in both 2D and 3D for viewing prosthesis templates on radiological images, tools for repositioning bones and templates, and tools for measurements in the images.For example the Sectra Orthopaedic Package shall:• Assist the orthopaedic surgeons in choosing which implants to use.• Assist the orthopaedic surgeons in choosing where to place cut lines etc.• Assist the orthopaedic surgeons in following-up of surgical procedures.• Assist the orthopaedic surgeon in planning trauma, joint, spine and deformity surgery.• Assist the radiologist in making MSK measurements.• Assist the user in producing outputs for post-processing such as 3D prints of anatomical models.Typical users of this system are trained professionals, for example orthopaedic surgeons, physicians, and radiologists.
2022-10-18
Sectra Digital Pathology Module - For In Vitro Diagnostic UseSectra Digital Pathology Module device is a software intended for viewing and management of digital images of scanned surgical pathology slides prepared from formalin-fixed paraffin embedded (FFPE) tissue. It is an aid to the pathologist to review and interpret these digital images for the purposes of primary diagnosis.Sectra Digital Pathology Module is not intended for use with frozen section, cytology, or non-FFPE hematopathology specimens.It is the responsibility of the pathologist to employ appropriate procedures and safeguards to assure the validity of the interpretation of images using Sectra Digital Pathology Module.Sectra Digital Pathology Module is intended for use with Leica's Aperio AT2 DX scanner and Dell MR2416 monitor.
2022-10-17
Sectra Workstation - Sectra Workstation is intended for the display, manipulation and diagnostic review of medical images (e.g. DICOM, jpeg, mpeg) and other related medical information. It can show images from different sources and interface with various image storage and printing devices. Areas of application include e.g. radiology (e.g. CR, DX, CT, MR, US), mammography, cardiology and ophthalmology.Typical users are trained medical professionals, including, but not limited to physicians, radiologists, nurses, medical technicians and assistants.Lossy compressed radiological images and DICOM “for processing” images are not intended for diagnostic review.Only for the United States:- Mammographic images must be reviewed on a monitor approved by FDA for this purpose.Sectra UniView, the web-based model of Sectra Workstation, is primarily intended for reference viewing on both stationary and mobile platforms. It is not intended for replacing a full diagnostic workstation but it can be used on stationary platforms for diagnostic review of medical images except mammograms. For diagnostic review of radiological images full image quality mode must be used.Note: The user is responsible for the quality, accuracy and adequacy of all information imported or entered into Sectra Workstation, whether it is videos, photographs, audio or text. Further, the user is responsible for the clinical adequacy of the viewing device used e.g. size, resolution and contrast.
2022-10-16
Sectra Orthopedic Package - Sectra Orthopaedic Package is intended to assist the user when doing preoperative planning, making musculoskeletal (MSK) measurements and post-operative follow-up. The device has functionality in both 2D and 3D for viewing prosthesis templates on radiological images, tools for repositioning bones and templates, and tools for measurements in the images.For example the Sectra Orthopaedic Package shall:• Assist the orthopaedic surgeons in choosing which implants to use.• Assist the orthopaedic surgeons in choosing where to place cut lines etc.• Assist the orthopaedic surgeons in following-up of surgical procedures.• Assist the orthopaedic surgeon in planning trauma, joint, spine and deformity surgery.• Assist the radiologist in making MSK measurements.• Assist the user in producing outputs for post-processing such as 3D prints of anatomical models.Typical users of this system are trained professionals, for example orthopaedic surgeons, physicians, and radiologists.
2022-05-03
Sectra Workstation - Sectra Workstation is intended for the display, manipulation and diagnostic review of medical images (e.g. DICOM, jpeg, mpeg) and other related medical information. It can show images from different sources and interface with various image storage and printing devices. Areas of application include e.g. radiology (e.g. CR, DX, CT, MR, US), mammography, cardiology and ophthalmology.Typical users are trained medical professionals, including, but not limited to physicians, radiologists, nurses, medical technicians and assistants.Lossy compressed radiological images and DICOM “for processing” images are not intended for diagnostic review.Only for the United States:- Mammographic images must be reviewed on a monitor approved by FDA for this purpose.Sectra UniView, the web-based model of Sectra Workstation, is primarily intended for reference viewing on both stationary and mobile platforms. It is not intended for replacing a full diagnostic workstation but it can be used on stationary platforms for diagnostic review of medical images except mammograms. For diagnostic review of radiological images full image quality mode must be used.Note: The user is responsible for the quality, accuracy and adequacy of all information imported or entered into Sectra Workstation, whether it is videos, photographs, audio or text. Further, the user is responsible for the clinical adequacy of the viewing device used e.g. size, resolution and contrast.
2022-03-30
Sectra Digital Pathology Module - For In Vitro Diagnostic UseSectra Digital Pathology Module device is a software intended for viewing and management of digital images of scanned surgical pathology slides prepared from formalin-fixed paraffin embedded (FFPE) tissue. It is an aid to the pathologist to review and interpret these digital images for the purposes of primary diagnosis.Sectra Digital Pathology Module is not intended for use with frozen section, cytology, or non-FFPE hematopathology specimens.It is the responsibility of the pathologist to employ appropriate procedures and safeguards to assure the validity of the interpretation of images using Sectra Digital Pathology Module.Sectra Digital Pathology Module is intended for use with Leica's Aperio AT2 DX scanner and Dell MR2416 monitor.
2022-03-30
Sectra Workstation - Sectra Workstation is intended for the display, manipulation and diagnostic review of medical images (e.g. DICOM, jpeg, mpeg) and other related medical information. It can show images from different sources and interface with various image storage and printing devices. Areas of application include e.g. radiology (e.g. CR, DX, CT, MR, US), mammography, cardiology and ophthalmology.Typical users are trained medical professionals, including, but not limited to physicians, radiologists, nurses, medical technicians and assistants.Lossy compressed radiological images and DICOM “for processing” images are not intended for diagnostic review.Only for the United States:- Mammographic images must be reviewed on a monitor approved by FDA for this purpose.Sectra UniView, the web-based model of Sectra Workstation, is primarily intended for reference viewing on both stationary and mobile platforms. It is not intended for replacing a full diagnostic workstation but it can be used on stationary platforms for diagnostic review of medical images except mammograms. For diagnostic review of radiological images full image quality mode must be used.Note: The user is responsible for the quality, accuracy and adequacy of all information imported or entered into Sectra Workstation, whether it is videos, photographs, audio or text. Further, the user is responsible for the clinical adequacy of the viewing device used e.g. size, resolution and contrast.
2021-10-21
Sectra Orthopedic Package - Sectra Orthopaedic Package is intended to assist orthopaedic surgeons when doing preoperative planning and post-operative follow-up.The device has functionality for overlaying prosthesis templates on radiological images, tools for repositioning bone and templates, and tools for measurements in the images.
2021-10-21
Sectra Workstation - Sectra Workstation is intended for the display, manipulation and diagnostic review of medical images (e.g. DICOM, jpeg, mpeg) and other related medical information. It can show images from different sources and interface with various image storage and printing devices. Areas of application include e.g. radiology (e.g. CR, DX, CT, MR, US), mammography, cardiology and ophthalmology.Typical users are trained medical professionals, including, but not limited to physicians, radiologists, nurses, medical technicians and assistants.Lossy compressed radiological images and DICOM “for processing” images are not intended for diagnostic review.Only for the United States:- Mammographic images must be reviewed on a monitor approved by FDA for this purpose.Sectra UniView, the web-based model of Sectra Workstation, is primarily intended for reference viewing on both stationary and mobile platforms. It is not intended for replacing a full diagnostic workstation but it can be used on stationary platforms for diagnostic review of medical images except mammograms. For diagnostic review of radiological images full image quality mode must be used.Note: The user is responsible for the quality, accuracy and adequacy of all information imported or entered into Sectra Workstation, whether it is videos, photographs, audio or text. Further, the user is responsible for the clinical adequacy of the viewing device used e.g. size, resolution and contrast.
2021-05-05
Sectra Digital Pathology Module - For In Vitro Diagnostic UseSectra Digital Pathology Module device is a software intended for viewing and management of digital images of scanned surgical pathology slides prepared from formalin-fixed paraffin embedded (FFPE) tissue. It is an aid to the pathologist to review and interpret these digital images for the purposes of primary diagnosis.Sectra Digital Pathology Module is not intended for use with frozen section, cytology, or non-FFPE hematopathology specimens.It is the responsibility of the pathologist to employ appropriate procedures and safeguards to assure the validity of the interpretation of images using Sectra Digital Pathology Module.Sectra Digital Pathology Module is intended for use with Leica's Aperio AT2 DX scanner and Dell MR2416 monitor.
2021-05-05
Sectra Orthopedic Package - Sectra Orthopaedic Package is intended to assist orthopaedic surgeons when doing preoperative planning and post-operative follow-up.The device has functionality for overlaying prosthesis templates on radiological images, tools for repositioning bone and templates, and tools for measurements in the images.
2020-11-04
Sectra Digital Pathology Module - For In Vitro Diagnostic UseSectra Digital Pathology Module device is a software intended for viewing and management of digital images of scanned surgical pathology slides prepared from formalin-fixed paraffin embedded (FFPE) tissue. It is an aid to the pathologist to review and interpret these digital images for the purposes of primary diagnosis.Sectra Digital Pathology Module is not intended for use with frozen section, cytology, or non-FFPE hematopathology specimens.It is the responsibility of the pathologist to employ appropriate procedures and safeguards to assure the validity of the interpretation of images using Sectra Digital Pathology Module.Sectra Digital Pathology Module is intended for use with Leica's Aperio AT2 DX scanner and Dell MR2416 monitor.
2020-10-09
Sectra Workstation - Sectra Workstation is intended for the display, manipulation and diagnostic review of medical images (e.g. DICOM, jpeg, mpeg) and other related medical information. It can show images from different sources and interface with various image storage and printing devices. Areas of application include e.g. radiology (e.g. CR, DX, CT, MR, US), mammography, and cardiology.Typical users are trained medical professionals, including, but not limited to physicians, radiologists, nurses, medical technicians and assistants.Lossy compressed radiological images and DICOM “for processing” images are not intended for diagnostic review.Only for the United States:- Mammographic images must be reviewed on a monitor approved by FDA for this purpose.Sectra UniView, the web-based model of Sectra Workstation, is primarily intended for reference viewing on both stationary and mobile platforms. It is not intended for replacing a full diagnostic workstation but it can be used on stationary platforms for diagnostic review of medical images except mammograms. For diagnostic review of radiological images full image quality mode must be used.Note: The user is responsible for the quality, accuracy and adequacy of all information imported or entered into Sectra Workstation, whether it is videos, photographs, audio or text. Further, the user is responsible for the clinical adequacy of the viewing device used e.g. size, resolution and contrast.
2020-10-08
Sectra Orthopedic Package - Sectra Orthopaedic Package is intended to assist orthopaedic surgeons when doing preoperative planning and post-operative follow-up.The device has functionality for overlaying prosthesis templates on radiological images, tools for repositioning bone and templates, and tools for measurements in the images.
2020-05-05
Sectra Digital Pathology Module - For In Vitro Diagnostic UseSectra Digital Pathology Module device is a software intended for viewing and management of digital images of scanned surgical pathology slides prepared from formalin-fixed paraffin embedded (FFPE) tissue. It is an aid to the pathologist to review and interpret these digital images for the purposes of primary diagnosis.Sectra Digital Pathology Module is not intended for use with frozen section, cytology, or non-FFPE hematopathology specimens.It is the responsibility of the pathologist to employ appropriate procedures and safeguards to assure the validity of the interpretation of images using Sectra Digital Pathology Module.Sectra Digital Pathology Module is intended for use with Leica's Aperio AT2 DX scanner and Dell MR2416 monitor.
2020-04-21
Sectra Digital Pathology Module - For In Vitro Diagnostic UseSectra Digital Pathology Module device is a software intended for viewing and management of digital images of scanned surgical pathology slides prepared from formalin-fixed paraffin embedded (FFPE) tissue. It is an aid to the pathologist to review and interpret these digital images for the purposes of primary diagnosis.Sectra Digital Pathology Module is not intended for use with frozen section, cytology, or non-FFPE hematopathology specimens.It is the responsibility of the pathologist to employ appropriate procedures and safeguards to assure the validity of the interpretation of images using Sectra Digital Pathology Module.Sectra Digital Pathology Module is intended for use with Leica's Aperio AT2 DX scanner and Dell MR2416 monitor.
2020-04-20
Sectra Workstation - Sectra Workstation is intended for the display, manipulation and diagnostic review of medical images (e.g. DICOM, jpeg, mpeg) and other related medical information. It can show images from different sources and interface with various image storage and printing devices. Areas of application include e.g. radiology (e.g. CR, DX, CT, MR, US), mammography, and cardiology.Typical users are trained medical professionals, including, but not limited to physicians, radiologists, nurses, medical technicians and assistants.Lossy compressed radiological images and DICOM “for processing” images are not intended for diagnostic review.Only for the United States:- Mammographic images must be reviewed on a monitor approved by FDA for this purpose.Sectra UniView, the web-based model of Sectra Workstation, is primarily intended for reference viewing on both stationary and mobile platforms. It is not intended for replacing a full diagnostic workstation but it can be used on stationary platforms for diagnostic review of medical images except mammograms. For diagnostic review of radiological images full image quality mode must be used.Note: The user is responsible for the quality, accuracy and adequacy of all information imported or entered into Sectra Workstation, whether it is videos, photographs, audio or text. Further, the user is responsible for the clinical adequacy of the viewing device used e.g. size, resolution and contrast.
2020-04-19
Sectra Workstation - Sectra Workstation is intended for the display, manipulation and diagnostic review of medical images (e.g. DICOM, jpeg, mpeg) and other related medical information. It can show images from different sources and interface with various image storage and printing devices. Areas of application include e.g. radiology (e.g. CR, DX, CT, MR, US), mammography, and cardiology.Typical users are trained medical professionals, including, but not limited to physicians, radiologists, nurses, medical technicians and assistants.Lossy compressed radiological images and DICOM “for processing” images are not intended for diagnostic review.Only for the United States:- Mammographic images must be reviewed on a monitor approved by FDA for this purpose.Sectra UniView, the web-based model of Sectra Workstation, is primarily intended for reference viewing on both stationary and mobile platforms. It is not intended for replacing a full diagnostic workstation but it can be used on stationary platforms for diagnostic review of medical images except mammograms. For diagnostic review of radiological images full image quality mode must be used.Note: The user is responsible for the quality, accuracy and adequacy of all information imported or entered into Sectra Workstation, whether it is videos, photographs, audio or text. Further, the user is responsible for the clinical adequacy of the viewing device used e.g. size, resolution and contrast.
2019-12-04
Sectra Orthopedic Package - Sectra Orthopaedic Package is intended to assist orthopaedic surgeons when doing preoperative planning and post-operative follow-up.The device has functionality for overlaying prosthesis templates on radiological images, tools for repositioning bone and templates, and tools for measurements in the images.
2019-12-03