CABLIVI- caplacizumab kit

Cablivi by

Drug Labeling and Warnings

Cablivi by is a Prescription medication manufactured, distributed, or labeled by Genzyme Corporation, Ablynx NV, Richter Helm Biologics GmbH and Co KG (Bovenau), Richter Helm Biologics GmbH and Co KG (Hamburg), Patheon Italia S.p.A., Enestia Belgium NV. Drug facts, warnings, and ingredients follow.

Drug Details [pdf]

  • 1 INDICATIONS AND USAGE

    CABLIVI is indicated for the treatment of adult patients with acquired thrombotic thrombocytopenic purpura (aTTP), in combination with plasma exchange and immunosuppressive therapy.

  • 2 DOSAGE AND ADMINISTRATION

    2.1 Recommended Dose and Schedules

    CABLIVI should be administered upon initiation of plasma exchange therapy. The recommended dose of CABLIVI is as follows:

    • First day of treatment: 11 mg bolus intravenous injection at least 15 minutes prior to plasma exchange followed by an 11 mg subcutaneous injection after completion of plasma exchange on day 1.
    • Subsequent days of treatment during daily plasma exchange: 11 mg subcutaneous injection once daily following plasma exchange.
    • Treatment after plasma exchange period: 11 mg subcutaneous injection once daily continuing for 30 days following the last daily plasma exchange. If after initial treatment course, sign(s) of persistent underlying disease such as suppressed ADAMTS13 activity levels remain present, treatment may be extended for a maximum of 28 days.

    Discontinue CABLIVI if the patient experiences more than 2 recurrences of aTTP, while on CABLIVI.

    Missed Dose

    If a dose of CABLIVI is missed during the plasma exchange period, it should be given as soon as possible. If a dose of CABLIVI is missed after the plasma exchange period, it can be administered within 12 hours of the scheduled time of administration. Beyond 12 hours, the missed dose should be skipped and the next daily dose administered according to the usual dosing schedule.

    2.2 Discontinuation for Surgery and Other Interventions

    Withhold CABLIVI treatment 7 days prior to elective surgery, dental procedures, or other invasive interventions [see Warnings and Precautions (5.1)].

    2.3 Reconstitution and Administration Instructions

    The first dose of CABLIVI should be administered by a healthcare provider as a bolus intravenous injection. Administer subsequent doses subcutaneously in the abdomen. Avoid injections around the navel. Do not administer consecutive injections in the same abdominal quadrant.

    Patients or caregivers may inject CABLIVI subcutaneously after proper training on the preparation and administration of CABLIVI, including aseptic technique [see Instructions for Use].

    • Ensure the CABLIVI vial and diluent syringe are at room temperature.
    • Reconstitute CABLIVI before administration using the provided syringe containing 1 mL Sterile Water for Injection, USP, to yield an 11 mg/mL single-dose solution.
    • Using aseptic technique throughout the preparation of the solution, attach the vial adapter to the vial containing CABLIVI.
    • Remove the plastic cap from the syringe and attach it to the vial adapter by twisting it clockwise until it cannot twist any further.
    • Slowly push the syringe plunger down until the syringe is empty. Do not remove the syringe from the vial adapter.
    • Gently swirl the vial until the cake or powder is completely dissolved. Do not shake.
    • Visually inspect that the reconstituted solution is clear and colorless.
    • Withdraw all of the clear, colorless reconstituted solution from the vial into the syringe. Label the CABLIVI syringe.
    • Administer the full amount of reconstituted solution.
    • For the initial intravenous injection, if using an intravenous line, the glass syringe should be connected to a standard Luer lock (and not a needleless connector) and flushed with either 0.9% Sodium Chloride Injection, USP, or 5% Dextrose Injection, USP.
    • Use the CABLIVI solution immediately. If not, use CABLIVI within 4 hours after reconstitution when stored in the refrigerator at 2°C to 8°C (36°F to 46°F).
  • 3 DOSAGE FORMS AND STRENGTHS

    For injection: 11 mg as a white lyophilized powder in a single-dose vial.

  • 4 CONTRAINDICATIONS

    CABLIVI is contraindicated in patients with a previous severe hypersensitivity reaction to caplacizumab-yhdp or to any of the excipients. Hypersensitivity reactions have included urticaria [see Adverse Reactions (6.1)].

  • 5 WARNINGS AND PRECAUTIONS

    5.1 Bleeding

    CABLIVI increases the risk of bleeding [see Adverse Reactions (6.1)]. In clinical studies, severe bleeding adverse reactions of epistaxis, gingival bleeding, upper gastrointestinal hemorrhage, and metrorrhagia were each reported in 1% of subjects. Overall, bleeding events occurred in approximately 58% of patients on CABLIVI versus 43% of patients on placebo.

    The risk of bleeding is increased in patients with underlying coagulopathies (e.g. hemophilia, other coagulation factor deficiencies). It is also increased with concomitant use of CABLIVI with drugs affecting hemostasis and coagulation [see Drug Interactions (7) and Clinical Pharmacology (12.3)].

    Interrupt use of CABLIVI if clinically significant bleeding occurs. If needed, von Willebrand factor concentrate may be administered to rapidly correct hemostasis. If CABLIVI is restarted, monitor closely for signs of bleeding.

    Withhold CABLIVI for 7 days prior to elective surgery, dental procedures or other invasive interventions. If emergency surgery is needed, the use of von Willebrand factor concentrate may be considered to correct hemostasis. After the risk of surgical bleeding has resolved, and CABLIVI is resumed, monitor closely for signs of bleeding.

  • 6 ADVERSE REACTIONS

    The following clinically significant adverse reactions are also discussed in other sections of the labeling:

    6.1 Clinical Trials Experience

    Because clinical trials are conducted under widely varying conditions, adverse reaction rates observed in the clinical trials of a drug cannot be directly compared to rates in the clinical trials of another drug and may not reflect the rates observed in practice.

    The safety of CABLIVI was evaluated in two placebo-controlled clinical studies (HERCULES, in which 71 patients received CABLIVI; and TITAN, in which 35 patients received CABLIVI). The data described below and in the Warnings and Precautions reflect exposure to CABLIVI during the blinded periods of both studies, which include 106 patients with aTTP who received at least one dose, age 18 to 79 years, of whom 69% were female and 73% were White. The median treatment duration with CABLIVI was 35 days (range 1–77 days).

    The most frequently reported adverse reactions (>15%) were epistaxis, headache and gingival bleeding. Seven patients (7%) in the CABLIVI group experienced an adverse reaction leading to study drug discontinuation. None of the adverse reactions leading to discontinuation were observed in more than 1% of patients.

    Among 106 patients treated with CABLIVI during the TITAN and HERCULES studies, serious bleeding adverse reactions reported in ≥2% patients included epistaxis (4%) and subarachnoid hemorrhage (2%).

    Adverse reactions that occurred in ≥2% of patients treated with CABLIVI and more frequently than in those treated with placebo across the pooled data from the two trials are summarized in Table 1. Urticaria was seen during plasma exchange.

    Table 1: Adverse Reactions in ≥2% of Patients Treated with CABLIVI and More Frequent than Placebo during the Blinded Periods of aTTP Studies (HERCULES and TITAN)
    Adverse Reaction by Body System CABLIVI
    (N=106)
    n (%)
    Placebo
    (N=110)
    n (%)
    Gastrointestinal disorders
    Gingival bleeding17 (16)3 (3)
    Rectal hemorrhage4 (4)0 (0)
    Abdominal wall hematoma3 (3)1 (1)
    General disorders and administration site conditions
    Fatigue16 (15)10 (9)
    Pyrexia14 (13)12 (11)
    Injection site hemorrhage6 (6)1 (1)
    Catheter site hemorrhage6 (6)5 (5)
    Injection site pruritus3 (3)0 (0)
    Musculoskeletal and connective tissue disorders
    Back pain7 (7)4 (4)
    Myalgia6 (6)2 (2)
    Nervous system disorders
    Headache22 (21)15 (14)
    Paresthesia13 (12)11 (10)
    Renal and urinary disorders
    Urinary tract infection6 (6)4 (4)
    Hematuria4 (4)3 (3)
    Reproductive system and breast disorders
    Vaginal hemorrhage5 (5)2 (2)
    Menorrhagia4 (4)1 (1)
    Respiratory, thoracic and mediastinal disorders
    Epistaxis31 (29)6 (6)
    Dyspnea10 (9)5 (5)
    Skin and subcutaneous tissue disorders
    Urticaria15 (14)7 (6)

    6.2 Immunogenicity

    As with all therapeutic proteins, there is potential for immunogenicity. The detection of antibody formation is highly dependent on the sensitivity and specificity of the assay. Additionally, the observed incidence of antibody (including neutralizing antibody) positivity in an assay may be influenced by several factors including assay methodology, sample handling, timing of sample collection, concomitant medications, and underlying disease. For these reasons, comparison of the incidence of antibodies to caplacizumab-yhdp in the studies described below, with the incidence of antibodies in other studies, or to other products, may be misleading.

    The prevalence of pre-existing antibodies binding to caplacizumab-yhdp observed during clinical studies and during evaluation of commercially available human samples varied between 4% and 63%. In aTTP patients, pre-existing antibodies can be produced by the patient or can originate from donor plasma during plasma exchange. No clinically apparent impact of these pre-existing antibodies on clinical efficacy or safety was found. Treatment-emergent anti-drug antibodies (TE ADA) against caplacizumab-yhdp were detected in 3% of patients treated with CABLIVI in the HERCULES study. In the HERCULES study, TE ADA were further characterized as having neutralizing potential. There was no clinically apparent impact on clinical efficacy or safety [see Clinical Pharmacology (12.3)].

  • 7 DRUG INTERACTIONS

    Concomitant Use of Anticoagulants

    Concomitant use of CABLIVI with any anticoagulant may increase the risk of bleeding. Assess and monitor closely for bleeding with concomitant use [see Warnings and Precautions (5.1) and Clinical Pharmacology (12.3)].

  • 8 USE IN SPECIFIC POPULATIONS

    8.1 Pregnancy

    Risk Summary

    There are no available data on CABLIVI use in pregnant women to inform a drug-associated risk of major birth defects and miscarriage. However, there are potential risks of hemorrhage in the mother and fetus associated with use of CABLIVI (see Clinical Considerations). In animal reproduction studies, there was no evidence of adverse developmental outcomes with intramuscular administration of caplacizumab-yhdp during organogenesis in guinea pigs at exposures approximately 30 times the AUC in humans at the recommended subcutaneous injection dose of 11 mg (see Data).

    All pregnancies have a background risk of birth defect, loss, or other adverse outcomes. The background rate of major birth defects and miscarriage in the indicated population is unknown. In the U.S. general population, the estimated background rate of major birth defects and miscarriage in clinically recognized pregnancies is 2% to 4% and 15% to 20%, respectively.

    Clinical Considerations

    Fetal/neonatal adverse reactions

    CABLIVI may increase the risk of bleeding in the fetus and neonate. Monitor neonates for bleeding [see Warnings and Precautions (5.1)].

    Maternal adverse reactions

    All patients receiving CABLIVI, including pregnant women, are at risk for bleeding. Pregnant women receiving CABLIVI should be carefully monitored for evidence of excessive bleeding [see Warnings and Precautions (5.1)].

    Data

    Animal data

    Two separate reproduction studies were conducted in pregnant guinea pigs with administration of caplacizumab-yhdp during the organogenesis period.

    In an embryo-fetal development study, caplacizumab-yhdp was administered intramuscularly at doses up to 20 mg/kg/day from gestational day (GD) 6 to GD 41 in guinea pigs. No maternal toxicity or adverse developmental outcomes were observed.

    In a toxicokinetic study assessing the exposure of caplacizumab-yhdp in the dams and fetuses, caplacizumab-yhdp was administered once daily to female guinea pigs at doses up to 40 mg/kg/day (corresponding to a drug exposure of approximately 30 times the AUC in humans at the recommended dose of 11 mg) by intramuscular injection from GD 6 to GD 41 or GD 61. Exposure to caplacizumab-yhdp was observed in the dams and fetuses, with no effects on embryo-fetal development.

    8.2 Lactation

    Risk Summary

    There is no information regarding the presence of caplacizumab-yhdp in human milk, the effects on the breastfed child or the effects on milk production.

    The developmental and health benefits of breastfeeding should be considered along with the mother's clinical need for CABLIVI and any potential adverse effects on the breastfed child from CABLIVI, or from the underlying maternal condition.

    8.4 Pediatric Use

    The safety and effectiveness of CABLIVI in pediatric patients have not been established.

    8.5 Geriatric Use

    Clinical studies of CABLIVI did not include sufficient numbers of subjects aged 65 and over to determine whether they respond differently from younger subjects.

    8.6 Hepatic Impairment

    No formal studies with CABLIVI have been conducted in patients with severe acute or chronic hepatic impairment and no data regarding the use of CABLIVI in these populations are available. Due to a potential increased risk of bleeding, use of CABLIVI in patients with severe hepatic impairment requires close monitoring for bleeding [see Warnings and Precautions (5.1)].

  • 10 OVERDOSAGE

    In case of overdose, based on the pharmacological action of CABLIVI, there is the potential for an increased risk of bleeding [see Warnings and Precautions (5.1)]. Close monitoring for signs and symptoms of bleeding is recommended. If needed, the use of von Willebrand factor concentrate could be considered to correct hemostasis.

  • 11 DESCRIPTION

    Caplacizumab-yhdp is a von Willebrand factor (vWF)-directed antibody fragment that consists of two identical humanized building blocks, linked by a three-alanine linker. Caplacizumab-yhdp is produced in Escherichia coli by recombinant DNA technology and has an approximate molecular weight of 28 kDa.

    CABLIVI (caplacizumab-yhdp) for injection is a sterile, white, preservative-free, lyophilized powder. Each single-dose vial delivers 11 mg caplacizumab-yhdp, anhydrous citric acid (0.18 mg), polysorbate 80 (0.10 mg), sucrose (62 mg), and trisodium citrate dihydrate (4.91 mg). After reconstitution with 1 mL of Sterile Water for Injection, USP, the final concentration is 11 mg/mL, at a pH of approximately 6.5.

  • 12 CLINICAL PHARMACOLOGY

    12.1 Mechanism of Action

    Caplacizumab-yhdp targets the A1-domain of vWF, and inhibits the interaction between vWF and platelets, thereby reducing both vWF-mediated platelet adhesion and platelet consumption.

    12.2 Pharmacodynamics

    Ristocetin cofactor (RICO) activity was used to assess vWF activity. Subcutaneous doses of caplacizumab-yhdp at greater than or equal to the approved recommended dosage to healthy subjects and patients with aTTP decreased RICO activity levels to below 20% approximately 4 hours post-dose. RICO activity returned to baseline values within 7 days of drug discontinuation.

    Caplacizumab-yhdp decreased vWF antigen and factor VIII:C levels. These reductions were transient and returned to baseline upon cessation of treatment.

    12.3 Pharmacokinetics

    Caplacizumab-yhdp pharmacokinetics depends on the expression of the target vWF and are not dose proportional. Higher levels of vWF antigen increase the fraction of drug-target complex retained in the circulation. Steady-state was reached following the first administration of CABLIVI in healthy subjects, with minimal accumulation. Following a single subcutaneous dose of 10 mg caplacizumab-yhdp to healthy subjects the mean (CV%) peak concentration (Cmax) was 528 (20%) ng/mL and AUC0–24 was 7951 (16%). Following subcutaneous dosing of 10 mg caplacizumab-yhdp daily for 14 days to healthy subjects, the mean (CV%) Cmax was 348 (30%) ng/mL and AUC0–τ was 6808 (26%) hr∙ng/mL.

    Absorption

    The bioavailability of subcutaneous caplacizumab-yhdp is approximately 90%.

    The maximum concentration was observed 6 to 7 hours after subcutaneous dosing of 10 mg caplacizumab-yhdp once daily in healthy subjects.

    Distribution

    Caplacizumab-yhdp central volume of distribution is 6.33 L in patients with aTTP.

    Elimination

    The half-life of caplacizumab-yhdp is concentration and target-level dependent.

    Metabolism

    The available data suggest target-bound caplacizumab-yhdp is metabolized within the liver. Because caplacizumab-yhdp is a monoclonal antibody fragment, it is expected to be catabolized by various proteolytic enzymes.

    Excretion

    The available nonclinical data suggest unbound caplacizumab-yhdp is cleared renally.

    Antidrug Antibodies

    No clinically significant differences in the pharmacokinetics of caplacizumab-yhdp were observed in patients with pre-existing or treatment-emergent anti-drug antibodies.

    Specific Populations

    No clinically significant differences in the pharmacokinetics of caplacizumab-yhdp were observed based on age (18 to 79 years), sex (66% females), race (White [83%] and Black [17%]), blood group (O [41%] and other groups [59%]), or renal impairment (mild [CrCl: 60 to 90 mL/min], moderate [CrCl: 30 to 60 mL/min] or severe [CrCl: 15 to 30 mL/min]). The effect of hepatic impairment on the pharmacokinetics of caplacizumab-yhdp is unknown [see Use in Specific Populations (8.6)].

    Drug Interaction Studies

    No dedicated drug-drug interaction studies with caplacizumab-yhdp have been conducted.

  • 13 NONCLINICAL TOXICOLOGY

    13.1 Carcinogenesis, Mutagenesis, Impairment of Fertility

    No studies have been performed to evaluate the potential of caplacizumab-yhdp for carcinogenicity or genotoxicity.

    Animal reproduction studies assessing the effects of caplacizumab-yhdp on male and female fertility have not been conducted.

  • 14 CLINICAL STUDIES

    The efficacy of CABLIVI for the treatment of adult patients with acquired thrombotic thrombocytopenic purpura (aTTP) in combination with plasma exchange and immunosuppressive therapy was established in a pivotal multicenter, randomized, double-blind, placebo-controlled trial (HERCULES) (NCT02553317).

    A total of 145 patients were enrolled in the HERCULES study; the median age was 45 (range: 18 to 79) years, 69% were female, 73% were White. Patients were randomized to either CABLIVI (n=72) or placebo (n=73). Patients in both groups received plasma exchange and immunosuppressive therapy. Patients were stratified according the severity of neurological involvement (Glasgow Coma Scale score ≤12 or 13 to 15). Patients with sepsis, infection with E. coli 0157, atypical hemolytic uremic syndrome, disseminated intravascular coagulation or congenital thrombotic thrombocytopenic purpura were not eligible for enrollment.

    Patients received a single 11 mg CABLIVI bolus intravenous injection or placebo prior to the first plasma exchange on study, followed by a daily subcutaneous injection of 11 mg CABLIVI or placebo after completion of plasma exchange, for the duration of the daily plasma exchange period and for 30 days thereafter. If after the initial treatment course, sign(s) of persistent underlying disease such as suppressed ADAMTS13 activity levels remained present, treatment was extended for 7 day intervals for a maximum of 28 days.

    The median treatment duration with CABLIVI was 35 days.

    The clinical trial protocol specified the CABLIVI dose as 10 mg, to be delivered by withdrawing all of the reconstituted solution from the vial and administering the full amount. A dose recovery study showed that the mean dose that can be withdrawn from a vial is 11 mg. Therefore, based on the dose recovery study, the mean dose delivered in the trial was 11 mg.

    The efficacy of CABLIVI in patients with aTTP was established based on time to platelet count response (platelet count ≥150,000/µL followed by cessation of daily plasma exchange within 5 days). Time to platelet count response was shorter among patients treated with CABLIVI, compared to placebo.

    Figure 1: Platelet Response over Time

    Figure 1

    Treatment with CABLIVI resulted in a lower number of patients with TTP-related death, recurrence of TTP, or at least one treatment-emergent major thromboembolic event (a composite endpoint) during the treatment period (see Table 2).

    Table 2: Patients in the HERCULES Study with aTTP-Related Death, a Recurrence of aTTP, or at Least One Treatment-Emergent Major Thromboembolic Event During Study Drug Treatment Period (ITT population)
    Number of patients withCABLIVI
    N=72
    Placebo
    N=73
    n (%)*n (%)
    N = number of patients within the population of interest (by treatment group); n = number of patients with events;
    TTP = thrombotic thrombocytopenic purpura; ITT = intent to treat
  • * based on 71 patients who received at least one dose of study drug.
  • Exacerbation defined as thrombocytopenia after initial recovery of platelet count (platelet count ≥150,000/µL with subsequent stop of daily plasma exchange within 5 days) that required reinitiation of daily plasma exchange during the 30-day post daily plasma exchange period.
  • p <0.0001
  •   TTP-related death03 (4.1)
      Recurrence of TTP (exacerbation)3 (4.2)28 (38.4)
      At least one treatment-emergent major thromboembolic event6 (8.5)6 (8.2)
    Total9 (12.7)36 (49.3)

    The proportion of patients with a recurrence of TTP in the overall study period (the drug treatment period plus the 28-day follow-up period after discontinuation of drug treatment) was lower in the CABLIVI group (9/72 patients [13%]) compared to the placebo group (28/73 patients [38%] (p<0.001). In the 6 patients in the CABLIVI group who experienced a recurrence of TTP during the follow-up period (i.e., a relapse defined as recurrent thrombocytopenia after initial recovery of platelet count (platelet count ≥150,000/µL) that required reinitiation of daily plasma exchange, occurring after the 30-day post daily plasma exchange period), ADAMTS13 activity levels were <10% at the end of the study drug treatment, indicating that the underlying immunological disease was still active at the time CABLIVI was stopped.

  • 16 HOW SUPPLIED/STORAGE AND HANDLING

    16.1 How Supplied

    CABLIVI (caplacizumab-yhdp) for injection is a sterile, white, preservative-free, lyophilized powder in a single-dose vial. Each carton (NDC: 58468-0225-1) contains:

    • one 11 mg CABLIVI single-dose vial (NDC: 58468-0227-1)
    • one 1 mL Sterile Water for Injection, USP, prefilled glass syringe (diluent for CABLIVI) (NDC: 58468-0229-1)
    • one sterile vial adapter
    • one sterile hypodermic needle (30 gauge)
    • two individually packaged alcohol swabs

    16.2 Storage

    Store refrigerated at 2°C to 8°C (36°F to 46°F) in the original carton to protect from light. Do not freeze. Unopened vials may be stored in the original carton at room temperature up to 30°C (86°F) for a single period of up to 2 months. Do not return CABLIVI to the refrigerator after it has been stored at room temperature.

  • 17 PATIENT COUNSELING INFORMATION

    Advise the patient to read the FDA-approved patient labeling (Instructions for Use).

    Bleeding [see Warnings and Precautions (5.1)]

    • Advise patients that bruising and bleeding may occur more easily, that nose bleeds and bleeding of gums may occur, and that it may take them longer than usual to stop bleeding. Advise patients to contact their healthcare provider immediately if excessive bleeding or bruising occur.
    • Advise patients to inform their healthcare provider before scheduling any elective surgery, dental procedure or other invasive interventions.
  • SPL UNCLASSIFIED SECTION

    Manufactured by:
    Ablynx N.V.
    Technologiepark 21
    9052 Ghent (Zwijnaarde), Belgium

    U.S. License No. 2085

    Distributed by:
    Genzyme Corporation
    Cambridge, MA 02142

    CABLIVI is a registered trademark of Ablynx N.V., Belgium
    ©2019 Ablynx N.V. All rights reserved.

  • INSTRUCTIONS FOR USE

    Instructions for Use
    CABLIVI® (cab-LIV-ee)
    (caplacizumab-yhdp)
    for injection
    Single-dose vial
    This Instructions for Use has been approved by the U.S. Food and Drug Administration.
    Be sure that you read, understand, and follow this Instructions for Use before you inject CABLIVI and each time you get a refill. There may be new information. Your healthcare provider should show you how to prepare and inject CABLIVI properly before your first injection. Talk to your healthcare provider if you have any questions.
    Important information:
    • Make sure that the name CABLIVI appears on the carton and vial label.
    • For each injection, one CABLIVI carton is needed. Only use the vial one time.
    • Only use the supplies that are provided in the carton to prepare your prescribed dose.
    • Do not use CABLIVI after the expiration date on the carton.
    • Do not reuse any of the supplies. After your injection, throw away (dispose of) the used vial with any remaining CABLIVI liquid in it. Throw away (dispose of) the used vial with the adapter attached and the syringe with the needle attached in a FDA-cleared sharps disposal container. See "Step 13: Throw away (dispose of) the used syringe and vial" at the end of this Instructions for Use for more disposal information.
    How should I store CABLIVI?
    • Store CABLIVI in the refrigerator between 36°F to 46°F (2°C to 8°C).
    • Use the mixed CABLIVI solution immediately. The mixed CABLIVI solution can be stored for up to 4 hours in the refrigerator at 36°F to 46°F (2°C to 8°C).
    • If needed, unopened CABLIVI vials may be stored at room temperature (up to 30°C or 86°F) in the original carton for a single period of up to two months. Write the date removed from the refrigerator in the space provided on the carton.
    • Do not return CABLIVI to the refrigerator after it has been stored at room temperature.
    • Do not freeze CABLIVI.
    • Keep CABLIVI in the carton that it came in to protect it from light.
    • Keep CABLIVI and all medicines out of the reach of children.
    Each CABLIVI carton contains:
    • 1 vial of CABLIVI
    • 1 prefilled syringe containing 1 mL Sterile Water for Injection, USP (diluent for CABLIVI)
    • 1 sterile vial adapter
    • 1 sterile needle
    • 2 alcohol swabs
    Additional supplies needed:
    Figure
    Before preparing a dose of CABLIVI:
    • Wash your hands well with soap and water.
    • Prepare a clean flat surface.
    • Check to make sure the carton contains all of the items needed to prepare a dose.
    • Check the expiration date (See Figure A). Do not use CABLIVI if the date has passed.
    • Do not use CABLIVI if the packaging or any supplies inside of the carton are damaged in any way.
    Figure A
    Figure A
    Step 1: Bring the vial and syringe to room temperature
    • Place all the supplies in the carton on the clean flat surface.
    • If the carton was not stored at room temperature, allow the vial and the syringe to reach room temperature by holding them in your hands for 10 seconds (See Figure B). Do not use any other way to warm up the vial and syringe.
    Figure B
    Figure B
    Step 2: Clean the rubber stopper
    • Remove the green plastic flip-off cap from the metal cap of the vial (See Figure C). Do not use the vial if the green plastic cap is missing.
    Figure C
    Figure C
    • Clean the exposed rubber stopper using one alcohol swab to wipe it and allow it to dry for a few seconds (See Figure D).
    • After cleaning the rubber stopper, do not touch it or allow it to touch any surface.
    Figure D
    Figure D
    Step 3: Attach the vial adapter
    • Take the vial adapter and remove the paper cover (See Figure E). Leave the vial adapter in its opened plastic packaging for now. Do not touch the adapter itself.
    • Place the adapter over the vial, while keeping the adapter in its plastic packaging.
    Figure E
    Figure E
    • Press down firmly on the adapter until it snaps into place, with the adapter spike pushing through the vial stopper (See Figure F). Do not remove the adapter from the vial once attached.
    • Keep the adapter in its plastic packaging.
    Figure F
    Figure F
    Step 4: Prepare the syringe
    • Pick up the syringe.
    • While holding the syringe with one hand, break off the white plastic cap by snapping at the perforation of the cap with your other hand (See Figure G).
    • Do not use the syringe if the white plastic cap is missing, loose, or damaged.
    • Do not touch the syringe tip or allow it to come into contact with any surfaces.
    • Lay the syringe on the clean flat surface.
    Figure G
    Figure G
    Step 5: Connect the syringe to adapter and vial
    • Remove the plastic packaging from the adapter attached to the vial by holding the vial with one hand, pressing the sides of the adapter packaging with your other hand, and then lifting the packaging upwards (See Figure H).
    • Be sure that the adapter does not detach from the vial.
    Figure H
    Figure H
    • Hold the adapter with the attached vial with one hand. Place the tip of the syringe on the connector part of the vial adapter using the other hand.
    • Gently lock the syringe into the vial adapter by turning it clockwise until it cannot twist any further (See Figure I).
    Figure I
    Figure I
    Step 6: Prepare the solution
    • Place the vial upright on the flat surface with the syringe pointing downwards.
    • Slowly push the syringe plunger down until the syringe is empty (See Figure J). Do not remove the syringe from the vial adapter.
    Figure J
    Figure J
    • With the syringe still connected to the vial adapter, gently swirl the vial, with syringe attached, until the powder is dissolved in the vial (See Figure K). Do not shake the vial.
    Figure K
    Figure K
    • Allow the vial with the attached syringe to stand on the flat surface for 2 minutes at room temperature to allow the powder to completely dissolve (See Figure L). The plunger may rise up by itself again, this is normal.
    Figure L
    Figure L
    Step 7: Draw up solution
    • Check the solution in the vial for particles, cloudiness, or clumps. All powder must be fully dissolved and the solution must be clear. Do not use the medicine if you see particles, cloudiness, or clumps. Use a new carton of CABLIVI or call your healthcare provider.
    • Slowly press the syringe plunger fully down.
    • Keep the syringe on the vial and turn the vial, adapter and syringe upside down.
    • Slowly pull the plunger down to withdraw all of the solution from the vial into the syringe (See Figure M). Do not shake it.
    Figure M
    Figure M
    Step 8: Detach the syringe
    • After drawing up the solution into the syringe, turn the vial, adapter and syringe back to the starting position and place on the flat surface (See Figure N).
    Figure N
    Figure N
    • Detach the filled syringe from the adapter by holding the vial and adapter in one hand and gently twisting the syringe counter-clockwise with the other hand (See Figure O).
    • Throw away the vial and the attached adapter into a sharps disposal container.
    • Do not touch the syringe tip or allow it to touch the clean flat surface. Place the syringe on the clean flat surface.
    Figure O
    Figure O
    Step 9: Attach the needle
    • Open the needle package by using both thumbs to pull apart the packaging (See Figure P).
    • Remove the needle from the package.
    Figure P
    Figure P
    • Attach the needle with the needle cap to the syringe by turning clockwise until it cannot twist any further (See Figure Q). Do not remove the needle cap.
    Figure Q
    Figure Q
    • Pull back the needle safety shield (See Figure R).
    Figure R
    Figure R
    Step 10: Prepare your injection site
    • Select an injection site on your stomach (abdomen) (See Figure S). Avoid the 2-inch area around your belly button (navel). It is important to avoid injecting in the same site on your abdomen that you used for a previous injection on consecutive days.
    Figure S
    Figure S
    • Clean your injection site with an alcohol swab (See Figure T). Let your skin dry.
    Figure T
    Figure T
    Step 11: Giving your injection
    • Carefully remove the needle cap from the needle and throw it away in a sharps disposal container (See Figure U). Make sure the needle does not touch anything before the injection.
    • Hold the syringe at eye level with the needle pointing upwards.
    Figure U
    Figure U
    • Check to see if there are any air bubbles. If there are any air bubbles, remove them by tapping the side of the syringe with your finger until they rise towards the tip (See Figure V).
    Figure V
    Figure V
    • Then, slowly push the plunger up until a small amount of liquid drips from the needle (See Figure W).
    Figure W
    Figure W
    • Gently use one hand to pinch the skin that has been cleaned between your thumb and forefinger, making a fold (See Figure X).
    • Hold the pinch during the entire injection.
    Figure X
    Figure X
    • Use your other hand to insert the needle all the way into your skin fold at a 45 to 90-degree angle (See Figure Y).
    • Push down on the plunger of the syringe until all of the solution is injected into your skin.
    • Pull out the needle at the same angle you inserted it. Do not rub your injection site.
    Figure Y
    Figure Y
    Step 12: After your injection
    • Right after your injection, move the needle safety shield over the needle until it clicks into place to activate the shield (See Figure Z).
    • In case you are bleeding at the injection site, place a cotton ball over the skin right away. Press gently on the cotton ball until the bleeding has stopped. If bleeding does not stop, call your healthcare provider.
    • If your injection site becomes red or sore, call your healthcare provider right away.
    Figure Z
    Figure Z
    Step 13: Throw away (dispose of) the used syringe and vial.
    • Throw away the syringe with the needle and the vial with the adapter in a FDA-cleared sharps disposal container right away after use. Do not throw away (dispose of) loose needles and syringes with your household trash.
    • If you do not have a FDA-cleared sharps disposal container, you may use a household container that is:
      • made of a heavy-duty plastic,
      • can be closed with a tight-fitting, puncture-resistant lid, without sharps being able to come out,
      • upright and stable during use,
      • leak-resistant, and
      • properly labeled to warn of hazardous waste inside the container.
    • When your sharps disposal container is almost full, you will need to follow your community guidelines for the right way to dispose of your sharps disposal container. There may be state or local laws about how you should throw away used needles and syringes. For more information about safe sharps disposal, and for specific information about sharps disposal in the state in which you live, go to the FDA's website at: http://www.fda.gov/safesharpsdisposal.
    • Do not dispose of your used sharps disposal container in your household trash unless your community guidelines permit this. Do not recycle your used sharps disposal container.

    Manufactured by:
    Ablynx N.V.
    Technologiepark 21
    9052 Ghent (Zwijnaarde), Belgium
    U.S. License No. 2085

    Distributed by:
    Genzyme Corporation
    Cambridge, MA 02142

    Issued: February 2019

  • PRINCIPAL DISPLAY PANEL - Kit Carton

    NDC: 58468-0225-1
    Rx only

    Cablivi®
    caplacizumab-yhdp
    for Injection

    For Intravenous and Subcutaneous Use

    Must be reconstituted with diluent provided.

    Single-dose vial. Discard unused portion.

    Each carton contains:

    • - One 11 mg Cablivi single-dose vial
    • - One 1 mL Sterile Water for Injection, USP,
      prefilled glass syringe (diluent for Cablivi)
    • - One sterile vial adapter
    • - One sterile hypodermic needle (30 gauge)
    • - Two individually packaged alcohol swabs

    11 mg

    per vial

    SANOFI GENZYME

    PRINCIPAL DISPLAY PANEL - Kit Carton
  • INGREDIENTS AND APPEARANCE
    CABLIVI 
    caplacizumab kit
    Product Information
    Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC: 58468-0225
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC: 58468-0225-11 in 1 CARTON02/06/2019
    Quantity of Parts
    Part #Package QuantityTotal Product Quantity
    Part 11 VIAL, GLASS 1 mL
    Part 21 SYRINGE, GLASS 1 mL
    Part 1 of 2
    CABLIVI 
    caplacizumab injection, powder, lyophilized, for solution
    Product Information
    Item Code (Source)NDC: 58468-0227
    Route of AdministrationINTRAVENOUS, SUBCUTANEOUS
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    CAPLACIZUMAB (UNII: 2R27AB6766) (CAPLACIZUMAB - UNII:2R27AB6766) CAPLACIZUMAB11 mg  in 1 mL
    Inactive Ingredients
    Ingredient NameStrength
    ANHYDROUS CITRIC ACID (UNII: XF417D3PSL) 0.18 mg  in 1 mL
    POLYSORBATE 80 (UNII: 6OZP39ZG8H) 0.1 mg  in 1 mL
    SUCROSE (UNII: C151H8M554) 62 mg  in 1 mL
    TRISODIUM CITRATE DIHYDRATE (UNII: B22547B95K) 4.91 mg  in 1 mL
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC: 58468-0227-11 mL in 1 VIAL, GLASS; Type 0: Not a Combination Product
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    BLABLA76111202/06/2019
    Part 2 of 2
    WATER 
    water solution
    Product Information
    Item Code (Source)NDC: 58468-0229
    Route of AdministrationINTRAVENOUS, SUBCUTANEOUS
    Inactive Ingredients
    Ingredient NameStrength
    WATER (UNII: 059QF0KO0R)  
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC: 58468-0229-11 mL in 1 SYRINGE, GLASS; Type 0: Not a Combination Product
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    BLABLA76111202/06/2019
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    BLABLA76111202/06/2019
    Labeler - Genzyme Corporation (025322157)
    Registrant - Ablynx NV (372000096)
    Establishment
    NameAddressID/FEIBusiness Operations
    Richter Helm Biologics GmbH and Co KG (Bovenau)329773852API MANUFACTURE(58468-0225)
    Establishment
    NameAddressID/FEIBusiness Operations
    Richter Helm Biologics GmbH and Co KG (Hamburg)340885442ANALYSIS(58468-0225)
    Establishment
    NameAddressID/FEIBusiness Operations
    Patheon Italia S.p.A.338336589MANUFACTURE(58468-0225) , ANALYSIS(58468-0225) , PACK(58468-0225) , LABEL(58468-0225)
    Establishment
    NameAddressID/FEIBusiness Operations
    Ablynx NV372000096ANALYSIS(58468-0225)
    Establishment
    NameAddressID/FEIBusiness Operations
    Enestia Belgium NV282797240LABEL(58468-0225) , PACK(58468-0225)
    Establishment
    NameAddressID/FEIBusiness Operations
    Genzyme Corporation050424395LABEL(58468-0225) , PACK(58468-0225)

  • Trademark Results [Cablivi]

    Mark Image

    Registration | Serial
    Company
    Trademark
    Application Date
    CABLIVI
    CABLIVI
    87133457 5283923 Live/Registered
    Ablynx N.V.
    2016-08-10

    © 2024 FDA.report
    This site is not affiliated with or endorsed by the FDA.