Metering Cup with Measure-Squeeze-Pour System
250 mL (8.5 fl oz) Container with 25 mL Metering Cup
This pack contains 1 Metering Cup and 1 dip tube
1. Insert the dip tube into base of the Metering Cup. Leave the "slotted end" of the dip tube exposed in the bottom of the container.
2. Unscrew shipping cap from container top.
3. Screw the Metering Cup onto container top.
4. Measure: To select the correct dose rate, rotate the adjuster cap (top) in either direction to position the dose indicator to the weight of the animal you want to treat. When body weight is between markings, use the higher setting.
5. Squeeze the container gently to fill the Metering Cup to the required dose. Release your grip and any excess will return to the container.
6. Pour: Apply the full dose by tipping and pouring along the backline of the animal until the Metering Cup is empty.
7. Storage: The Metering Cup should not remain attached to the container when not in use. Detach the Metering Cup after each use and replace the shipping cap to close the container top.
Squeeze-Measure-Pour Bottle (1 L/33.8 fl oz)
1. Unscrew cap from the dosing chamber and remove the seal.If the dosing chamber closure is not removed, liquid will not flow into the dosing
chamber when squeezing the main chamber.
2. Squeeze the main chamber gently until the desired level of solution is present in the dosing chamber. Release pressure on the main chamber to avoid further filling.
3. Measure: Fill the dosing chamber to the weight of the animal you want to treat. When body weight is between markings, use the higher volume.
4. Pour: With the dosing chamber positioned above the capped main chamber, apply the full dose by tipping and pouring along the backline of the animal until the dosing chamber is empty.
5. Storage: After use, replace the dosing chamber cap.
Backpack (1 L/33.8 fl oz, 2.5 L/84.5 fl oz, and 5 L/169 fl oz), or 5L/169 fl oz or 10 L/338 fl oz Pack
Connect the dosing applicator and draw-off tubing to the backpack as follows:
Attach the open end of the draw-off tubing to an appropriate dosing applicator. Attach draw-off tubing to the cap with the stem that is included in the pack. Replace the shipping cap with the cap having the draw-off tubing.
Gently prime the dosing applicator, checking for leaks. Follow the dosing applicator manufacturer's directions for adjusting the dose and proper use and maintenance of the dosing applicator and draw-off tubing.