ReliOn™ 2CT A1C Meter 3055

GUDID 00681131403252

The ReliOn™ Fast A1C Test provides quantitative measurement of the percent of glycated hemoglobin (%HbA1C or %A1C) levels in human whole blood samples.

WAL-MART STORES, INC.

Glycated haemoglobin (HbA1c) monitoring system IVD, home-use

• Primary Device ID: 00681131403252
• NIH Device Record Key: 6e5c0a13-7d3e-4899-80f4-7283f455f5c9
• Commercial Distribution Status: In Commercial Distribution
• Brand Name: ReliOn™ 2CT A1C Meter
• Version Model Number: 3055
• Catalog Number: 3055
• Company DUNS: 051957769
• Company Name: WAL-MART STORES, INC.
• Device Count: 2
• DM Exempt: false
• Pre-market Exempt: false
• MRI Safety Status: Labeling does not contain MRI Safety Information
• Human Cell/Tissue Product: false
• Device Kit: true
• Device Combination Product: false
• Single Use: true
• Lot Batch: true
• Serial Number: false
• Manufacturing Date: false
• Expiration Date: true
• Donation Id Number: false
• Contains Natural Rubber Latex: false
• Labeled No Natural Rubber Latex: false
• RX Perscription: false
• OTC Over-The-Counter: true

Customer Support Contacts

• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx
• Phone: +1 855-776-0662
• Email: xx@xx.xx

Operating and Storage Conditions

• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.
• Special Storage Condition, Specify: Between 0 and 0 *Use at room temperature (64-77 degrees F / 18-25 C) and out of direct sunlight.
• Special Storage Condition, Specify: Between 0 and 0 *f you cannot store the kit under these recommended conditions, you may refrigerate the kit (do not freeze). However you must bring the kit to room temperature for at least one hour prior to use.
• Special Storage Condition, Specify: Between 0 and 0 *If test has recently been at temperatures above 77 degrees F / 25 C, or below 64 F / 18 C, allow all kit parts to come to room temperature (64-77 F / 18 -25 C) for at least one hour before testing.
• Special Storage Condition, Specify: Between 0 and 0 *Avoid running test on hot or cold surfaces or near sources of hot or cold.
• Storage Environment Temperature: Between 64 Degrees Fahrenheit and 77 Degrees Fahrenheit
• Special Storage Condition, Specify: Between 0 and 0 *Do not use if seal is missing or broken. Do not use if dot is red or if the product is past the expiration date.

Device Identifiers

Device Issuing Agency	Device ID
GS1	00681131403252 [Primary]
GS1	10681131403259 [Package]; Package: [24 Units]; In Commercial Distribution
GS1	20681131403256 [Unit of Use]

FDA Pre-market Approvals/Notifications & deNovo

• Premarket Notification: K090413

FDA Product Code

• LCP: Assay, Glycosylated Hemoglobin

Sterilization

• Steralize Prior To Use: false
• Device Is Sterile: false

Device Entry Metadata

• Public Version Status: New
• Device Record Status: Published
• Public Version Number: 1
• Public Version Date: 2021-04-07
• Device Publish Date: 2021-03-30

Devices Manufactured by WAL-MART STORES, INC.

• 00194346415397 - Equate: 2024-12-13 Equate Cleaning and Disinfecting Care Lens Care System PLUS
• 10194346371737 - equate Tampons: 2024-12-09 Mulipack of 45 tampons, 25 Regular absorbency, 10 Super and 10 Super plus
• 00194346270644 - ReliOn: 2024-11-25 50 Insulin Pen Needles
• 00194346270651 - ReliOn: 2024-11-25 Bonus Pack: 50 Insulin Pen Needles plus 1 Sharps Container
• 00194346288014 - EQUATE: 2024-11-25 Equate Transformer Kids Battery Toothbrush
• 10194346288035 - EQUATE: 2024-11-25 Equate Squishmallows Kids Battery Toothbrush
• 10194346288042 - EQUATE: 2024-11-25 Peppa Pig Equate Manual 2pk Toothbrush
• 00194346320776 - Equate: 2024-11-20 Equate Skin Tag Remover 1ct