The SuperPole is a high quality, commercial grade floor to ceiling safety pole. The SuperPole is intended for moderate vertical and horizontal load bearing to provide sitting and standing support for people with reduced mobility. The SuperPole is installed between a structural floor and ceiling by turning a jackscrew at the bottom of the pole. The pressure created by the jackscrew is strong enough for the SuperPole to support the user, yet it does not require drilling holes into the floor or ceiling. This is ideal for relocating or removing the pole. The floor to ceiling range and maximum user weight dependent on model. Note: Product is not intended to support full body weight.The SuperPole is not to be used in any other way than described above. The SuperPole is made from robust materials and is capable of supporting vigorous forces during proper / normal usage. The structural components of the pole are made from metal. The components of the pole that make direct contact with the floor and ceiling are made of non-slip rubber to protect the surfaces from damage, as well as provide traction. The top plate and base plate can be easily separated from the pole by use of multiple use fasteners (clevis and cotter pin). The top plate can be secured to the structural ceiling joist with wood screws: - if regular inspection (and if necessary, tightening) cannot be done - if pole is subjected to aggressive usage - if using SuperPole Heavy Duty (SP-HD)
A device that is fixed to the wall and is of differing bar shaped designs that is intended to provide a person with a disability a supportive hand-hold whilst standing and moving.