Terumo® Advanced Perfusion System 1 801093
GUDID 00886799000564
A bracket that mounts to a vertical pole that will hold one roller pump
Terumo Cardiovascular Systems Corporation
Portable active medical device mount| Primary Device ID | 00886799000564 |
| NIH Device Record Key | c47f74c3-7500-427e-96b0-5b82718660e9 |
| Commercial Distribution Status | In Commercial Distribution |
| Brand Name | Terumo® Advanced Perfusion System 1 |
| Version Model Number | 801093 |
| Catalog Number | 801093 |
| Company DUNS | 177655466 |
| Company Name | Terumo Cardiovascular Systems Corporation |
| Device Count | 1 |
| DM Exempt | false |
| Pre-market Exempt | true |
| MRI Safety Status | Labeling does not contain MRI Safety Information |
| Human Cell/Tissue Product | false |
| Device Kit | false |
| Device Combination Product | false |
| Single Use | false |
| Lot Batch | false |
| Serial Number | false |
| Manufacturing Date | true |
| Expiration Date | false |
| Donation Id Number | false |
| Contains Natural Rubber Latex | false |
| Labeled No Natural Rubber Latex | false |
| RX Perscription | true |
| OTC Over-The-Counter | false |
Customer Support Contacts
Device Identifiers
| Device Issuing Agency | Device ID |
|---|---|
| GS1 | 00886799000564 [Primary] |
FDA Product Code
| KRI | Accessory Equipment, Cardiopulmonary Bypass |
Sterilization
| Steralize Prior To Use | false |
| Device Is Sterile | false |
Device Entry Metadata
| Public Version Status | New |
| Device Record Status | Published |
| Public Version Number | 1 |
| Public Version Date | 2022-08-08 |
| Device Publish Date | 2022-07-29 |
On-Brand Devices [Terumo® Advanced Perfusion System 1]
| 00886799001479 | Cable assembly, for use with the air bubble detection module and sensor |
| 00886799001387 | The centrifugal control unit provides the local display and control mechanism for the centrifuga |
| 00886799001370 | The large roller pump is a peristaltic pump with a 6 inch (15 cm) raceway that can be used for a |
| 00886799001363 | The small roller pump is a peristaltic pump with a 4 inch (10 cm) raceway that can be used for a |
| 00886799001325 | Central Control Monitor (CCM) combines an embedded computer, a touch screen, and a Graphical Use |
| 00886799000892 | The flow sensor is a non-invasive ultrasonic transducer used to measure fluid velocity. |
| 00886799000885 | The air sensor is a non-invasive, ultrasonic sensor that can detect air bubbles in the perfusion |
| 00886799000878 | The occluder head provides a computer-controlled tube occlusion mechanism. The occluder head is |
| 00886799000847 | Cable used to connect the data module to the intended device. |
| 00886799000830 | Cable used to connect the CDI data module to the intended CDI device. |
| 00886799000809 | A PC Card contained in one of the CCM card slots that stores a system activity log and is used b |
| 00886799000793 | The Configuration PC Card is used to backup System 1 Perfusion Configurations. These cards also |
| 00886799000786 | This kit is provided to store and house miscellaneous items: roller pump knob colored caps, wire |
| 00886799000779 | The occluder module serves as the interface between the occluder head and the system. The occlud |
| 00886799000762 | The Interface Module for CDI 500 Module provides the interface between the CDI™ 500 Blood Para |
| 00886799000755 | The Interface Module for CDI 100 provides the interface between a CDI ™ 100 or CDI™ 100 Satu |
| 00886799000748 | The interface between the temperature sensor and the rest of the system. |
| 00886799000731 | The RS-232 Interface Module provides the interface between the RS-232 protocol data acquistion s |
| 00886799000724 | The pressure module serves as the interface between up to two pressure transducers and the syste |
| 00886799000717 | The level detect module serves as the interface between the level sensor and the system. This mo |
| 00886799000700 | The Air Bubble Detect (ABD) module is the interface between an air sensor and the system. The AB |
| 00886799000694 | Central Control Monitor (CCM) combines an embedded computer, a touch screen, and a Graphical Use |
| 00886799000687 | The flowmeter module provides the interface between the flow sensor and the system. The module p |
| 00886799000663 | System base using a 220V-240V, 7A (circuit breaker), 50/60 Hz (10A power source required) power |
| 00886799000656 | System base using a 100V-120V, 15A (circuit breaker), 50/60 Hz (20A power source required) power |
| 00886799000649 | The 15" gooseneck, 20 watt lamp is intended to be mounted on any of the system poles |
| 00886799000595 | The 33" gooseneck, 20 watt lamp is intended to be mounted on any of the system poles |
| 00886799000588 | The electronic gas blender is an optional module that integrates into the APS1 chassis. It accep |
| 00886799000557 | The centrifugal control unit provides the local display and control mechanism for the centrifuga |
| 00886799000540 | Roller Pump (6" Blue). The large roller pump is a peristaltic pump with a 6 inch (15 cm) raceway |
| 00886799000533 | Roller Pump (4" Blue). The small roller pump is a peristaltic pump with a 4 inch (10 cm) raceway |
| 00886799000526 | Roller pump hand cranks used to rotate the roller pump occlusion mechanism during an electrical |
| 00886799000519 | Ultrasonic couplant used to facilitate the transmission of sound energy between the level sensor |
| 00886799000502 | The air sensor is a non-invasive, ultrasonic sensor that can detect air bubbles in the perfusion |
| 00886799000496 | The level sensor is an ultrasonic transducer that is mounted on a hardshell blood reservoir and |
| 00886799000489 | The level sensor is an ultrasonic transducer that is mounted on a hardshell blood reservoir and |
| 00886799000472 | Ultrasonic couplant used to facilitate the transmission of sound energy between the flow sensor |
| 00886799000465 | Manual drive motor used to rotate the disposable centrifugal pump in the event of electrical po |
| 00886799000458 | The centrifugal motor is the drive mechanism necessary to pump fluid through a disposable centri |
| 00886799000366 | The air sensor is a non-invasive, ultrasonic sensor that can detect air bubbles in the perfusion |
| 00886799000083 | The flow sensor is a non-invasive ultrasonic transducer used to measure fluid flow. Includes ult |
| 00886799000052 | The air sensor is a non-invasive, ultrasonic sensor that can detect air bubbles in the perfusion |
| 00886799000045 | The air sensor is a non-invasive, ultrasonic sensor that can detect air bubbles in the perfusion |
| 00886799000038 | The air sensor is a non-invasive, ultrasonic sensor that can detect air bubbles in the perfusion |
| 00886799001394 | The flexible mounting arm attaches to the APS1 vertically mounting pole and is used as a mount f |
| 00886799001356 | A bracket that mounts to a vertical pole that extends towards the floor to hold one pump lower |
| 00886799001349 | A bracket that mounts to a vertical pole that will hold two pumps |
| 00886799000922 | US hose kit, Oxygen and air hoses used for connecting medical gases to the gas blender. |
| 00886799000632 | A bracket that attaches to a vertical pole and is used as a mount for up to two flowmeter module |
| 00886799000564 | A bracket that mounts to a vertical pole that will hold one roller pump |
Trademark Results [Terumo]
Mark Image Registration | Serial | Company Trademark Application Date |
|---|---|
 TERUMO 98436800 not registered Live/Pending |
Terumo Kabushiki Kaisha 2024-03-06 |
 TERUMO 97802240 not registered Live/Pending |
Terumo Kabushiki Kaisha 2023-02-20 |
 TERUMO 86490751 5590542 Live/Registered |
Terumo Kabushiki Kaisha 2014-12-26 |
 TERUMO 73297771 1276674 Dead/Cancelled |
Terumo Kabushiki Kaisha (Termumo Corporation) 1981-02-19 |
 TERUMO 72322168 0890553 Dead/Cancelled |
KABUSHIKI KAISHA JINTAN TERUMO 1969-03-19 |
© 2024 FDA.report
This site is not affiliated with or endorsed by the FDA.