Additional heating unit for AquaA water purification system.AquaHT for:AquaA 900H & AquaHTAquaA 1800H & AquaA2 900H & AquaHTAquaA 1800H & AquaHTAquaA 1800H & AquaA2 1800H & AquaHTAquaA 2700H & AquaHTAquaA 2700H & AquaA2 2700H & AquaHTAquaA 3600H & AquaHTAquaA 3600H & AquaA2 3600H & AquaHTThe AquaA water purification system is a modular reverse osmosis unit intended for use with hemodialysis systems to remove organic and inorganic substances and microbial contaminants from the water used for treating hemodialysis patients or related therapies. This device is intended to be a component in a complete water purification system and is not a complete water treatment system. The reverse osmosis unit must be preceded by pre-treatment devices and may need to be followed by post-treatment devices as well, to meet current AAMI/ANSI/ISO and Federal (U.S.) standards.
An assembly of devices designed to remove unwanted contaminants (bacteria, viruses, chemicals, dissolved substances) from water using osmotic pressure applied to one side of a selective membrane. The system removes ions, large molecules (e.g. proteins, glucose, urea, salts) and other particles from solution by forcing water at high pressure through a membrane containing pores just big enough (e.g., 0.0005 microns) to permit passage of small molecules and water, whilst the contaminants are flushed to waste.