SNC600c (TNC) 1047000-1Z

GUDID 05060608880249

Radiation therapy QA device.

SUN NUCLEAR CORP.

Solid-state-semiconductor radiation measuring probe Solid-state-semiconductor radiation measuring probe Solid-state-semiconductor radiation measuring probe Solid-state-semiconductor radiation measuring probe Solid-state-semiconductor radiation measuring probe Solid-state-semiconductor radiation measuring probe Solid-state-semiconductor radiation measuring probe Solid-state-semiconductor radiation measuring probe Solid-state-semiconductor radiation measuring probe Solid-state-semiconductor radiation measuring probe Solid-state-semiconductor radiation measuring probe Solid-state-semiconductor radiation measuring probe Solid-state-semiconductor radiation measuring probe Solid-state-semiconductor radiation measuring probe
Primary Device ID05060608880249
NIH Device Record Key3c472cbf-0628-4398-a1bd-8d5ab500b187
Commercial Distribution StatusIn Commercial Distribution
Brand NameSNC600c (TNC)
Version Model Number1047400Z
Catalog Number1047000-1Z
Company DUNS122240021
Company NameSUN NUCLEAR CORP.
Device Count1
DM Exemptfalse
Pre-market Exemptfalse
MRI Safety StatusMR Conditional
Human Cell/Tissue Productfalse
Device Kitfalse
Device Combination Productfalse
Single Usefalse
Lot Batchtrue
Serial Numbertrue
Manufacturing Datetrue
Expiration Datefalse
Donation Id Numberfalse
Contains Natural Rubber Latexfalse
Labeled No Natural Rubber Latexfalse
RX Perscriptiontrue
OTC Over-The-Counterfalse

Operating and Storage Conditions

Storage Environment TemperatureBetween 10 Degrees Celsius and 40 Degrees Celsius
Handling Environment Atmospheric PressureBetween 18.7 KiloPascal and 106 KiloPascal
Storage Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Handling Environment TemperatureBetween -30 Degrees Celsius and 50 Degrees Celsius
Handling Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Special Storage Condition, SpecifyBetween 0 and 0 *The storage case supplied with the SNC600c is designed for hand transport. For shipping, the storage case should always be packed in a secondary shipping container designed for fragile objects.
Storage Environment Atmospheric PressureBetween 57.2 KiloPascal and 106 KiloPascal
Special Storage Condition, SpecifyBetween 0 and 0 *Dry the chamber, cable, connector and detector holders thoroughly before placing in storage case.
Special Storage Condition, SpecifyBetween 0 and 0 *Long exposure to high humidity may have an adverse effect on measurements. If chamber has been exposed to high humidity and exhibits abnormal leakage results, place chamber in a cool and dry area.
Special Storage Condition, SpecifyBetween 0 and 0 *If abnormal behavior continues the chamber can be placed at an elevated temperature with lower humidity. Do not use for measurements while the chamber is exhibiting abnormal behavior.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c/accessories in the storage case, in an indoor, protected environment where they will not be irradiated by the direct beam and where scattered radiation will be kept at a minimum.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c and accessories in the appropriate foam cutouts. To avoid damage to the SNC600c chamber, do not store buildup caps or other accessories loose in the storage case.
Storage Environment TemperatureBetween 10 Degrees Celsius and 40 Degrees Celsius
Handling Environment Atmospheric PressureBetween 18.7 KiloPascal and 106 KiloPascal
Storage Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Handling Environment TemperatureBetween -30 Degrees Celsius and 50 Degrees Celsius
Handling Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Special Storage Condition, SpecifyBetween 0 and 0 *The storage case supplied with the SNC600c is designed for hand transport. For shipping, the storage case should always be packed in a secondary shipping container designed for fragile objects.
Storage Environment Atmospheric PressureBetween 57.2 KiloPascal and 106 KiloPascal
Special Storage Condition, SpecifyBetween 0 and 0 *Dry the chamber, cable, connector and detector holders thoroughly before placing in storage case.
Special Storage Condition, SpecifyBetween 0 and 0 *Long exposure to high humidity may have an adverse effect on measurements. If chamber has been exposed to high humidity and exhibits abnormal leakage results, place chamber in a cool and dry area.
Special Storage Condition, SpecifyBetween 0 and 0 *If abnormal behavior continues the chamber can be placed at an elevated temperature with lower humidity. Do not use for measurements while the chamber is exhibiting abnormal behavior.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c/accessories in the storage case, in an indoor, protected environment where they will not be irradiated by the direct beam and where scattered radiation will be kept at a minimum.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c and accessories in the appropriate foam cutouts. To avoid damage to the SNC600c chamber, do not store buildup caps or other accessories loose in the storage case.
Storage Environment TemperatureBetween 10 Degrees Celsius and 40 Degrees Celsius
Handling Environment Atmospheric PressureBetween 18.7 KiloPascal and 106 KiloPascal
Storage Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Handling Environment TemperatureBetween -30 Degrees Celsius and 50 Degrees Celsius
Handling Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Special Storage Condition, SpecifyBetween 0 and 0 *The storage case supplied with the SNC600c is designed for hand transport. For shipping, the storage case should always be packed in a secondary shipping container designed for fragile objects.
Storage Environment Atmospheric PressureBetween 57.2 KiloPascal and 106 KiloPascal
Special Storage Condition, SpecifyBetween 0 and 0 *Dry the chamber, cable, connector and detector holders thoroughly before placing in storage case.
Special Storage Condition, SpecifyBetween 0 and 0 *Long exposure to high humidity may have an adverse effect on measurements. If chamber has been exposed to high humidity and exhibits abnormal leakage results, place chamber in a cool and dry area.
Special Storage Condition, SpecifyBetween 0 and 0 *If abnormal behavior continues the chamber can be placed at an elevated temperature with lower humidity. Do not use for measurements while the chamber is exhibiting abnormal behavior.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c/accessories in the storage case, in an indoor, protected environment where they will not be irradiated by the direct beam and where scattered radiation will be kept at a minimum.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c and accessories in the appropriate foam cutouts. To avoid damage to the SNC600c chamber, do not store buildup caps or other accessories loose in the storage case.
Storage Environment TemperatureBetween 10 Degrees Celsius and 40 Degrees Celsius
Handling Environment Atmospheric PressureBetween 18.7 KiloPascal and 106 KiloPascal
Storage Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Handling Environment TemperatureBetween -30 Degrees Celsius and 50 Degrees Celsius
Handling Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Special Storage Condition, SpecifyBetween 0 and 0 *The storage case supplied with the SNC600c is designed for hand transport. For shipping, the storage case should always be packed in a secondary shipping container designed for fragile objects.
Storage Environment Atmospheric PressureBetween 57.2 KiloPascal and 106 KiloPascal
Special Storage Condition, SpecifyBetween 0 and 0 *Dry the chamber, cable, connector and detector holders thoroughly before placing in storage case.
Special Storage Condition, SpecifyBetween 0 and 0 *Long exposure to high humidity may have an adverse effect on measurements. If chamber has been exposed to high humidity and exhibits abnormal leakage results, place chamber in a cool and dry area.
Special Storage Condition, SpecifyBetween 0 and 0 *If abnormal behavior continues the chamber can be placed at an elevated temperature with lower humidity. Do not use for measurements while the chamber is exhibiting abnormal behavior.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c/accessories in the storage case, in an indoor, protected environment where they will not be irradiated by the direct beam and where scattered radiation will be kept at a minimum.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c and accessories in the appropriate foam cutouts. To avoid damage to the SNC600c chamber, do not store buildup caps or other accessories loose in the storage case.
Storage Environment TemperatureBetween 10 Degrees Celsius and 40 Degrees Celsius
Handling Environment Atmospheric PressureBetween 18.7 KiloPascal and 106 KiloPascal
Storage Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Handling Environment TemperatureBetween -30 Degrees Celsius and 50 Degrees Celsius
Handling Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Special Storage Condition, SpecifyBetween 0 and 0 *The storage case supplied with the SNC600c is designed for hand transport. For shipping, the storage case should always be packed in a secondary shipping container designed for fragile objects.
Storage Environment Atmospheric PressureBetween 57.2 KiloPascal and 106 KiloPascal
Special Storage Condition, SpecifyBetween 0 and 0 *Dry the chamber, cable, connector and detector holders thoroughly before placing in storage case.
Special Storage Condition, SpecifyBetween 0 and 0 *Long exposure to high humidity may have an adverse effect on measurements. If chamber has been exposed to high humidity and exhibits abnormal leakage results, place chamber in a cool and dry area.
Special Storage Condition, SpecifyBetween 0 and 0 *If abnormal behavior continues the chamber can be placed at an elevated temperature with lower humidity. Do not use for measurements while the chamber is exhibiting abnormal behavior.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c/accessories in the storage case, in an indoor, protected environment where they will not be irradiated by the direct beam and where scattered radiation will be kept at a minimum.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c and accessories in the appropriate foam cutouts. To avoid damage to the SNC600c chamber, do not store buildup caps or other accessories loose in the storage case.
Storage Environment TemperatureBetween 10 Degrees Celsius and 40 Degrees Celsius
Handling Environment Atmospheric PressureBetween 18.7 KiloPascal and 106 KiloPascal
Storage Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Handling Environment TemperatureBetween -30 Degrees Celsius and 50 Degrees Celsius
Handling Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Special Storage Condition, SpecifyBetween 0 and 0 *The storage case supplied with the SNC600c is designed for hand transport. For shipping, the storage case should always be packed in a secondary shipping container designed for fragile objects.
Storage Environment Atmospheric PressureBetween 57.2 KiloPascal and 106 KiloPascal
Special Storage Condition, SpecifyBetween 0 and 0 *Dry the chamber, cable, connector and detector holders thoroughly before placing in storage case.
Special Storage Condition, SpecifyBetween 0 and 0 *Long exposure to high humidity may have an adverse effect on measurements. If chamber has been exposed to high humidity and exhibits abnormal leakage results, place chamber in a cool and dry area.
Special Storage Condition, SpecifyBetween 0 and 0 *If abnormal behavior continues the chamber can be placed at an elevated temperature with lower humidity. Do not use for measurements while the chamber is exhibiting abnormal behavior.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c/accessories in the storage case, in an indoor, protected environment where they will not be irradiated by the direct beam and where scattered radiation will be kept at a minimum.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c and accessories in the appropriate foam cutouts. To avoid damage to the SNC600c chamber, do not store buildup caps or other accessories loose in the storage case.
Storage Environment TemperatureBetween 10 Degrees Celsius and 40 Degrees Celsius
Handling Environment Atmospheric PressureBetween 18.7 KiloPascal and 106 KiloPascal
Storage Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Handling Environment TemperatureBetween -30 Degrees Celsius and 50 Degrees Celsius
Handling Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Special Storage Condition, SpecifyBetween 0 and 0 *The storage case supplied with the SNC600c is designed for hand transport. For shipping, the storage case should always be packed in a secondary shipping container designed for fragile objects.
Storage Environment Atmospheric PressureBetween 57.2 KiloPascal and 106 KiloPascal
Special Storage Condition, SpecifyBetween 0 and 0 *Dry the chamber, cable, connector and detector holders thoroughly before placing in storage case.
Special Storage Condition, SpecifyBetween 0 and 0 *Long exposure to high humidity may have an adverse effect on measurements. If chamber has been exposed to high humidity and exhibits abnormal leakage results, place chamber in a cool and dry area.
Special Storage Condition, SpecifyBetween 0 and 0 *If abnormal behavior continues the chamber can be placed at an elevated temperature with lower humidity. Do not use for measurements while the chamber is exhibiting abnormal behavior.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c/accessories in the storage case, in an indoor, protected environment where they will not be irradiated by the direct beam and where scattered radiation will be kept at a minimum.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c and accessories in the appropriate foam cutouts. To avoid damage to the SNC600c chamber, do not store buildup caps or other accessories loose in the storage case.
Storage Environment TemperatureBetween 10 Degrees Celsius and 40 Degrees Celsius
Handling Environment Atmospheric PressureBetween 18.7 KiloPascal and 106 KiloPascal
Storage Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Handling Environment TemperatureBetween -30 Degrees Celsius and 50 Degrees Celsius
Handling Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Special Storage Condition, SpecifyBetween 0 and 0 *The storage case supplied with the SNC600c is designed for hand transport. For shipping, the storage case should always be packed in a secondary shipping container designed for fragile objects.
Storage Environment Atmospheric PressureBetween 57.2 KiloPascal and 106 KiloPascal
Special Storage Condition, SpecifyBetween 0 and 0 *Dry the chamber, cable, connector and detector holders thoroughly before placing in storage case.
Special Storage Condition, SpecifyBetween 0 and 0 *Long exposure to high humidity may have an adverse effect on measurements. If chamber has been exposed to high humidity and exhibits abnormal leakage results, place chamber in a cool and dry area.
Special Storage Condition, SpecifyBetween 0 and 0 *If abnormal behavior continues the chamber can be placed at an elevated temperature with lower humidity. Do not use for measurements while the chamber is exhibiting abnormal behavior.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c/accessories in the storage case, in an indoor, protected environment where they will not be irradiated by the direct beam and where scattered radiation will be kept at a minimum.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c and accessories in the appropriate foam cutouts. To avoid damage to the SNC600c chamber, do not store buildup caps or other accessories loose in the storage case.
Storage Environment TemperatureBetween 10 Degrees Celsius and 40 Degrees Celsius
Handling Environment Atmospheric PressureBetween 18.7 KiloPascal and 106 KiloPascal
Storage Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Handling Environment TemperatureBetween -30 Degrees Celsius and 50 Degrees Celsius
Handling Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Special Storage Condition, SpecifyBetween 0 and 0 *The storage case supplied with the SNC600c is designed for hand transport. For shipping, the storage case should always be packed in a secondary shipping container designed for fragile objects.
Storage Environment Atmospheric PressureBetween 57.2 KiloPascal and 106 KiloPascal
Special Storage Condition, SpecifyBetween 0 and 0 *Dry the chamber, cable, connector and detector holders thoroughly before placing in storage case.
Special Storage Condition, SpecifyBetween 0 and 0 *Long exposure to high humidity may have an adverse effect on measurements. If chamber has been exposed to high humidity and exhibits abnormal leakage results, place chamber in a cool and dry area.
Special Storage Condition, SpecifyBetween 0 and 0 *If abnormal behavior continues the chamber can be placed at an elevated temperature with lower humidity. Do not use for measurements while the chamber is exhibiting abnormal behavior.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c/accessories in the storage case, in an indoor, protected environment where they will not be irradiated by the direct beam and where scattered radiation will be kept at a minimum.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c and accessories in the appropriate foam cutouts. To avoid damage to the SNC600c chamber, do not store buildup caps or other accessories loose in the storage case.
Storage Environment TemperatureBetween 10 Degrees Celsius and 40 Degrees Celsius
Handling Environment Atmospheric PressureBetween 18.7 KiloPascal and 106 KiloPascal
Storage Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Handling Environment TemperatureBetween -30 Degrees Celsius and 50 Degrees Celsius
Handling Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Special Storage Condition, SpecifyBetween 0 and 0 *The storage case supplied with the SNC600c is designed for hand transport. For shipping, the storage case should always be packed in a secondary shipping container designed for fragile objects.
Storage Environment Atmospheric PressureBetween 57.2 KiloPascal and 106 KiloPascal
Special Storage Condition, SpecifyBetween 0 and 0 *Dry the chamber, cable, connector and detector holders thoroughly before placing in storage case.
Special Storage Condition, SpecifyBetween 0 and 0 *Long exposure to high humidity may have an adverse effect on measurements. If chamber has been exposed to high humidity and exhibits abnormal leakage results, place chamber in a cool and dry area.
Special Storage Condition, SpecifyBetween 0 and 0 *If abnormal behavior continues the chamber can be placed at an elevated temperature with lower humidity. Do not use for measurements while the chamber is exhibiting abnormal behavior.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c/accessories in the storage case, in an indoor, protected environment where they will not be irradiated by the direct beam and where scattered radiation will be kept at a minimum.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c and accessories in the appropriate foam cutouts. To avoid damage to the SNC600c chamber, do not store buildup caps or other accessories loose in the storage case.
Storage Environment TemperatureBetween 10 Degrees Celsius and 40 Degrees Celsius
Handling Environment Atmospheric PressureBetween 18.7 KiloPascal and 106 KiloPascal
Storage Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Handling Environment TemperatureBetween -30 Degrees Celsius and 50 Degrees Celsius
Handling Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Special Storage Condition, SpecifyBetween 0 and 0 *The storage case supplied with the SNC600c is designed for hand transport. For shipping, the storage case should always be packed in a secondary shipping container designed for fragile objects.
Storage Environment Atmospheric PressureBetween 57.2 KiloPascal and 106 KiloPascal
Special Storage Condition, SpecifyBetween 0 and 0 *Dry the chamber, cable, connector and detector holders thoroughly before placing in storage case.
Special Storage Condition, SpecifyBetween 0 and 0 *Long exposure to high humidity may have an adverse effect on measurements. If chamber has been exposed to high humidity and exhibits abnormal leakage results, place chamber in a cool and dry area.
Special Storage Condition, SpecifyBetween 0 and 0 *If abnormal behavior continues the chamber can be placed at an elevated temperature with lower humidity. Do not use for measurements while the chamber is exhibiting abnormal behavior.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c/accessories in the storage case, in an indoor, protected environment where they will not be irradiated by the direct beam and where scattered radiation will be kept at a minimum.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c and accessories in the appropriate foam cutouts. To avoid damage to the SNC600c chamber, do not store buildup caps or other accessories loose in the storage case.
Storage Environment TemperatureBetween 10 Degrees Celsius and 40 Degrees Celsius
Handling Environment Atmospheric PressureBetween 18.7 KiloPascal and 106 KiloPascal
Storage Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Handling Environment TemperatureBetween -30 Degrees Celsius and 50 Degrees Celsius
Handling Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Special Storage Condition, SpecifyBetween 0 and 0 *The storage case supplied with the SNC600c is designed for hand transport. For shipping, the storage case should always be packed in a secondary shipping container designed for fragile objects.
Storage Environment Atmospheric PressureBetween 57.2 KiloPascal and 106 KiloPascal
Special Storage Condition, SpecifyBetween 0 and 0 *Dry the chamber, cable, connector and detector holders thoroughly before placing in storage case.
Special Storage Condition, SpecifyBetween 0 and 0 *Long exposure to high humidity may have an adverse effect on measurements. If chamber has been exposed to high humidity and exhibits abnormal leakage results, place chamber in a cool and dry area.
Special Storage Condition, SpecifyBetween 0 and 0 *If abnormal behavior continues the chamber can be placed at an elevated temperature with lower humidity. Do not use for measurements while the chamber is exhibiting abnormal behavior.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c/accessories in the storage case, in an indoor, protected environment where they will not be irradiated by the direct beam and where scattered radiation will be kept at a minimum.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c and accessories in the appropriate foam cutouts. To avoid damage to the SNC600c chamber, do not store buildup caps or other accessories loose in the storage case.
Storage Environment TemperatureBetween 10 Degrees Celsius and 40 Degrees Celsius
Handling Environment Atmospheric PressureBetween 18.7 KiloPascal and 106 KiloPascal
Storage Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Handling Environment TemperatureBetween -30 Degrees Celsius and 50 Degrees Celsius
Handling Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Special Storage Condition, SpecifyBetween 0 and 0 *The storage case supplied with the SNC600c is designed for hand transport. For shipping, the storage case should always be packed in a secondary shipping container designed for fragile objects.
Storage Environment Atmospheric PressureBetween 57.2 KiloPascal and 106 KiloPascal
Special Storage Condition, SpecifyBetween 0 and 0 *Dry the chamber, cable, connector and detector holders thoroughly before placing in storage case.
Special Storage Condition, SpecifyBetween 0 and 0 *Long exposure to high humidity may have an adverse effect on measurements. If chamber has been exposed to high humidity and exhibits abnormal leakage results, place chamber in a cool and dry area.
Special Storage Condition, SpecifyBetween 0 and 0 *If abnormal behavior continues the chamber can be placed at an elevated temperature with lower humidity. Do not use for measurements while the chamber is exhibiting abnormal behavior.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c/accessories in the storage case, in an indoor, protected environment where they will not be irradiated by the direct beam and where scattered radiation will be kept at a minimum.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c and accessories in the appropriate foam cutouts. To avoid damage to the SNC600c chamber, do not store buildup caps or other accessories loose in the storage case.
Storage Environment TemperatureBetween 10 Degrees Celsius and 40 Degrees Celsius
Handling Environment Atmospheric PressureBetween 18.7 KiloPascal and 106 KiloPascal
Storage Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Handling Environment TemperatureBetween -30 Degrees Celsius and 50 Degrees Celsius
Handling Environment HumidityBetween 10 Percent (%) Relative Humidity and 90 Percent (%) Relative Humidity
Special Storage Condition, SpecifyBetween 0 and 0 *The storage case supplied with the SNC600c is designed for hand transport. For shipping, the storage case should always be packed in a secondary shipping container designed for fragile objects.
Storage Environment Atmospheric PressureBetween 57.2 KiloPascal and 106 KiloPascal
Special Storage Condition, SpecifyBetween 0 and 0 *Dry the chamber, cable, connector and detector holders thoroughly before placing in storage case.
Special Storage Condition, SpecifyBetween 0 and 0 *Long exposure to high humidity may have an adverse effect on measurements. If chamber has been exposed to high humidity and exhibits abnormal leakage results, place chamber in a cool and dry area.
Special Storage Condition, SpecifyBetween 0 and 0 *If abnormal behavior continues the chamber can be placed at an elevated temperature with lower humidity. Do not use for measurements while the chamber is exhibiting abnormal behavior.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c/accessories in the storage case, in an indoor, protected environment where they will not be irradiated by the direct beam and where scattered radiation will be kept at a minimum.
Special Storage Condition, SpecifyBetween 0 and 0 *Store the SNC600c and accessories in the appropriate foam cutouts. To avoid damage to the SNC600c chamber, do not store buildup caps or other accessories loose in the storage case.

Device Identifiers

Device Issuing AgencyDevice ID
GS105060608880249 [Primary]
GS105060608880249 [Primary]
GS105060608880249 [Primary]
GS105060608880249 [Primary]
GS105060608880249 [Primary]
GS105060608880249 [Primary]
GS105060608880249 [Primary]
GS105060608880249 [Primary]
GS105060608880249 [Primary]
GS105060608880249 [Primary]
GS105060608880249 [Primary]
GS105060608880249 [Primary]
GS105060608880249 [Primary]
GS105060608880249 [Primary]
HIBCCB01610470001Z0 [Previous]
HIBCCB01610470001Z0 [Previous]
HIBCCB01610470001Z0 [Previous]
HIBCCB01610470001Z0 [Previous]
HIBCCB01610470001Z0 [Previous]
HIBCCB01610470001Z0 [Previous]
HIBCCB01610470001Z0 [Previous]
HIBCCB01610470001Z0 [Previous]
HIBCCB01610470001Z0 [Previous]
HIBCCB01610470001Z0 [Previous]
HIBCCB01610470001Z0 [Previous]
HIBCCB01610470001Z0 [Previous]
HIBCCB01610470001Z0 [Previous]
HIBCCB01610470001Z0 [Previous]

FDA Pre-market Approvals/Notifications & deNovo

FDA Product Code

LHNSystem, Radiation Therapy, Charged-Particle, Medical
LHNSystem, Radiation Therapy, Charged-Particle, Medical
LHNSystem, Radiation Therapy, Charged-Particle, Medical
LHNSystem, Radiation Therapy, Charged-Particle, Medical
LHNSystem, Radiation Therapy, Charged-Particle, Medical
LHNSystem, Radiation Therapy, Charged-Particle, Medical
LHNSystem, Radiation Therapy, Charged-Particle, Medical
LHNSystem, Radiation Therapy, Charged-Particle, Medical
LHNSystem, Radiation Therapy, Charged-Particle, Medical
LHNSystem, Radiation Therapy, Charged-Particle, Medical
LHNSystem, Radiation Therapy, Charged-Particle, Medical
LHNSystem, Radiation Therapy, Charged-Particle, Medical
LHNSystem, Radiation Therapy, Charged-Particle, Medical
LHNSystem, Radiation Therapy, Charged-Particle, Medical

Sterilization

Steralize Prior To Usefalse
Device Is Sterilefalse

Device Entry Metadata

Public Version StatusNew
Device Record StatusPublished
Public Version Number1
Public Version Date2020-07-30
Device Publish Date2020-07-22

On-Brand Devices [SNC600c (TNC)]

B01610470001Z0Radiation therapy QA device.
05060608880249Radiation therapy QA device.

© 2020 FDA.report
This site is not affiliated with or endorsed by the FDA.