1. Insulin Syringe2. Intended use : For the injection of insulin and primarily in human.3. Instructions for use1) To expose plunger, remove large orange cap.2) To expose needle, pull small orange cap STRAIGHT off, being careful not to bend needle.3) To measure correct dosage align top edge of plunger tip with your dosage mark on the syringe scale.4) Use syringe ONCE only. To prevent misuse after injection, destroy syringe and needle.4. WarningFor patients who mix two types of insulin, do not change(a) the order of mixing that the physician has prescribed or(b) the model and brand of the syringe without first consulting your physician or pharmacist.Failure to heed this warning can result in dosage error.5. StorageAvoid direct sunlight and store at room temperature in a dry and clean place.6. CautionFederal law restricts this device to sale by or on the order of a physician.7. Expiry Date : 5 years from manufacturing date
A sterile device consisting of a calibrated barrel (cylinder) with plunger intended to be used to administer an injection of insulin to a patient subcutaneously; a non-retractable needle is included, either attached or detached (usually capped for user protection). The syringe is typically made of plastic and silicone materials and will have plunger anti-sticking properties allowing smooth plunger movement. It can be used by healthcare personnel or patient, and will allow for the aspiration of the pharmaceutical from its container for direct administration to the patient or via an intravenous (IV) port, heparin lock, or saline lock. This is a single-use device.