The DIO Biotite-H Implant System is comprised of dental implant, surgical instruments and prosthetic components. The DIG BIOTITE -H Implant System is designed for conventional two-stage procedures for single and multiple unit prosthetics. The DIO Biotite-H Implant System's screw-form dental implant consist of machined titanium. Screw's Diameter: Φ3.8mm, Φ4.1mm, Φ4.5mm, Φ4.8mm, Φ5.3mm. Length: 8.0mm, 10.mm, 12.0mm, 14.0mm. The implant's raw material is titanium and its alloys for surgical implant applications (as perASTM-F-67, A-STM-F-136). The special implant surface is consists of 100% calcium phosphate(CaHPO 42H20). BioTite-H Implant System is an electrochemically deposited calcium phosphate coating based upon abiomimetic process in which implants are coated in an electrolytic bath with a 15+±- 5m thin bioactive layer of a calcium phosphate composite. Biotite -H Implant System composed of the two calciumphosphates brushite(>95% )and HA(
A sterile device made of alloplastic materials [e.g., titanium (Ti), stainless steel, ceramic] intended to be surgically implanted into alveolar and/or basal bone of the mandible or maxilla to provide support and a means of retention for a dental prosthesis (e.g., bridge, single-tooth, overdenture). It is a two-piece device composed of an anchorage component (implant body) in the form of a threaded screw that is implanted into bone, and a retention component (implant abutment), typically attached to the anchorage component after implantation, that protrudes through gingival tissues to support the prosthesis.
dioimplantusa.com