The SpineKure Kyphoplasty System is designed to reduce spinal compression fracture and restore sagittal alignment by creating a space in the vertebral body to facilitate the insertion of bone cement. The SpineKure Kyphoplasty System is comprised of a Balloon Catheter, Balloon Inflator and Cement Delivery System (Accessories kit). The Balloon Catheter’s main components are the shaft, hub and the inflatable balloon located at the distal tip. The surface of balloon is covered with a silicone lubricant to enhance the insertion and withdrawal of catheter. Radiopaque markers located at the distal and proximal end of deflated working surface allow fluoroscopic visualization of the deflated balloon catheter during positioning. The Balloon Inflator (SBI) is a disposable device with an integral pressure gauge. The Cement Delivery System (SCDS) are consist of Bone Access Needle (SBN), Cement Filler & Pusher (SFP), Cannula & Expander (SCE), Drill Bit (SDB), Wire-pin (SWP-T, SWP-R).
A collection of sterile surgical instruments and devices used for the reduction of a vertebral compression fractures (VCFs) caused by trauma, cancer, or osteoporosis during a minimally invasive procedure commonly known as balloon kyphoplasty. It typically consists of a bone access needle, an osteo introducer, an inflation syringe, and the inflatable bone tamp. This procedure involves the insertion of the balloon tamp into a patient's back to reduce a vertebral body fracture by compression of cancellous bone and/or movement of the endplates as the balloon is inflated, and filling the void created with orthopaedic cement/filler to stabilize the vertebra. This is a single-use device.