Activa Instrument B-ISC-9020

GUDID E302BISC90209

Depth gauge, for cannulated screws

Bioretec Oy

Surgical depth gauge, reusable

• Primary Device ID: E302BISC90209
• NIH Device Record Key: 8a2fb012-51ca-40b4-84c5-732f8109b72e
• Commercial Distribution Status: In Commercial Distribution
• Brand Name: Activa Instrument
• Version Model Number: B-ISC-9020
• Catalog Number: B-ISC-9020
• Company DUNS: 368715301
• Company Name: Bioretec Oy
• Device Count: 1
• DM Exempt: false
• Pre-market Exempt: true
• MRI Safety Status: Labeling does not contain MRI Safety Information
• Human Cell/Tissue Product: false
• Device Kit: false
• Device Combination Product: false
• Single Use: false
• Lot Batch: true
• Serial Number: false
• Manufacturing Date: false
• Expiration Date: false
• Donation Id Number: false
• Contains Natural Rubber Latex: false
• Labeled No Natural Rubber Latex: false
• RX Perscription: true
• OTC Over-The-Counter: false

Customer Support Contacts

• Phone: +358207789500
• Email: sales@bioretec.com

Device Identifiers

Device Issuing Agency	Device ID
HIBCC	E302BISC90209 [Primary]

FDA Product Code

• HTJ: Gauge, Depth

Sterilization

• Steralize Prior To Use: true
• Device Is Sterile: false

[E302BISC90209]

Moist Heat or Steam Sterilization

Device Entry Metadata

• Public Version Status: Update
• Device Record Status: Published
• Public Version Number: 3
• Public Version Date: 2018-12-07
• Device Publish Date: 2016-09-20

On-Brand Devices [Activa Instrument]

• E302BISC45059: Double drill sleeve Ø4.5/3.5 mm, for 4.0/4.5 mm cannulated screws
• E302BISC35059: Double drill sleeve Ø2.7/3.5 mm, for 3.5 mm cannulated screws
• E302BIS65059: Protection sheath
• E302BIS45059: Double drill sleeve Ø3.2/4.5 mm, for 4.5mm screws
• E302BIS35059: Double drill sleeve Ø2.5/3.5 mm, for 3.5mm screws
• E302BIS27059: Double drill sleeve Ø2.0/2.7 mm, for 2.7mm screws
• E302BIS20059: Double drill sleeve Ø1.5/2.0 mm, for 2.0mm screws
• E302BISS10009: ActivaScrew™ Instrument Set
• E302BISC90339: HEX shaft, for 4.0/4.5 mm cannulated screws
• E302BISC90329: HEX shaft, for 3.5 mm cannulated screws
• E302BISC90209: Depth gauge, for cannulated screws
• E302BISC90139: Large handle, cannulated, quick coupling
• E302BISC90009: Sterilization tray, for ActivaScrew™ Cannulated instruments
• E302BISC45049: Countersink, for cannulated screws
• E302BISC45039: Holding sleeve, for 4.0/4.5mm cannulated screws
• E302BISC45029: Direct driver, for 4.0/4.5 mm cannulated screws
• E302BISC45019: Tap Ø4.5 mm, for 4.5 mm cannulated screws
• E302BISC45009: Drill bit Ø3.5 mm, for 4.5 mm cannulated screws, quick coupling
• E302BISC40019: Tap Ø4.0 mm, for 4.0 mm cannulated screws
• E302BISC40009: Drill bit Ø3.2 mm, for 4.0 mm cannulated screws, quick coupling
• E302BISC35029: Direct driver, for 3.5 mm cannulated screws
• E302BISC35019: Tap Ø3.5 mm, for 3.5 mm cannulated screws
• E302BISC35009: Drill bit Ø2.7 mm, for 3.5 mm cannulated screws, quick coupling
• E302BISC16029: K-wire Ø1.6 mm, length 300 mm, trocar tip, measuring ring at 150 mm, for 4/4.5 mm cannulated sc
• E302BISC16019: K-wire Ø1.6 mm, length 150 mm, trocar tip, for 4.0/4.5mm cannulated screws
• E302BISC16009: K-wire Ø1.6 mm, length 150 mm, threaded tip, for 4.0/4.5mm cannulated screws
• E302BISC12519: K-wire Ø1.25 mm, length 150 mm, trocar tip, for 3.5mm cannulated screws
• E302BISC12509: K-wire Ø1.25 mm, length 150 mm, threaded tip, for 3.5mm cannulated screws
• E302BISC10009: ActivaScrew™ Cannulated Instrument Set
• E302BIS90339: HEX shaft, for 4.5mm screws
• E302BIS90329: HEX shaft, for 2.0/2.7/3.5 mm screws
• E302BIS90219: Depth gauge, for 4.5 mm screws
• E302BIS90209: Depth gauge, for 2.0/2.7/3.5 mm screws
• E302BIS90129: Small handle, quick coupling
• E302BIS90109: T-handle, quick coupling
• E302BIS90009: Sterilization tray, for ActivaScrew™ instruments
• E302BIS45119: Tap Ø4.5 mm, for 4.5 mm screws up to length 45 mm
• E302BIS45109: Drill bit Ø3.2 mm, for 4.5 mm screws up to length 70 mm, quick coupling
• E302BIS45049: Countersink, for 4.5mm screws
• E302BIS45039: Holding sleeve, for 4.5mm screws
• E302BIS45019: Tap Ø4.5 mm, for 4.5 mm screws up to length 90 mm
• E302BIS45009: Drill bit Ø3.2 mm, for 4.5 mm screws up to length 90 mm, quick coupling
• E302BIS35049: Countersink, for 2.7/3.5 mm screws
• E302BIS35039: Holding sleeve, for 2.0/2.7/3.5mm screws
• E302BIS35019: Tap Ø3.5 mm, for 3.5 mm screws
• E302BIS35009: Drill bit Ø2.5mm, for 3.5 mm screws, quick coupling
• E302BIS27019: Tap Ø2.7 mm, for 2.7 mm screws
• E302BIS27009: Drill bit Ø2.0 mm, for 2.7 mm screws, quick coupling
• E302BIS20049: Countersink, for 2.0 mm screws
• E302BIS20019: Tap Ø2.0 mm, for 2.0 mm screws