Dentemp Canker Cover
CANKER COVER
50 matching records for Cover Cap.
CANKER COVER
CANKER COVER
KINFIELD CLOUD COVER MINERAL BODY SUNSCREEN BROAD SPECTRUM SPF 35
KINFIELD CLOUD COVER MINERAL BODY SUNSCREEN BROAD SPECTRUM SPF 35
OCTINOXATE, OCTOCRYLENE, TITANIUM DIOXIDE
OCTINOXATE, OCTOCRYLENE, TITANIUM DIOXIDE
OCTINOXATE, TITANIUM DIOXIDE, OCTOCRYLENE
OCTINOXATE, TITANIUM DIOXIDE, OCTOCRYLENE
SALICYLIC ACID
NITROGLYCERIN
ACETAMINOPHEN
IBUPROFEN
NAPROXEN SODIUM
NAPROXEN SODIUM
OMEPRAZOLE 20MG
ACETAMINOPHEN
ACETAMINOPHEN, CAFFEINE
GABAPENTIN
ACETAMINOPHEN 500MG/ DIPHENHYDRAMINE HCL 25MG
ACETAMINOPHEN, ASPIRIN AND CAFFEINE
A detachable plastic cap for an endoscope (e.g., duodenoscope) designed to cover the exposed mechanical components at the distal end of the endoscope during a single use. It is intended as an alternative to the common non-detachable distal end-cap of an end...
A head covering designed as a cap intended to be worn by surgical staff during an operation to protect both the patient and themselves from the transfer of microorganisms, body fluids, and particulate material; it may also be used as a hygienic head coverin...
A head covering designed as a cap intended to be worn by surgical staff during an operation to protect both the patient and themselves from the transfer of microorganisms, body fluids, and particulate material; it may also be used as a hygienic head coverin...
A covering intended to be used to seal the top of an in vitro diagnostic test tube or reagent reservoir to protect the contents against contamination from the external environment, and to prevent spillage and/or evaporation of contents during transportation...
A cap/cover intended to be extended over a used needle (attached to a syringe/autoinjector or not) to prevent accidental needle sticks, typically during removal of the needle. It is typically a plastic housing with appropriate shielding to prevent injury up...
A small, implantable, rounded plug, cover or threaded screw designed to seal the proximal end of an orthopaedic nail implanted to treat a damaged bone (e.g., a fracture), to prevent healing tissue from growing into the hollow nail and to facilitate nail ext...
A non-sterile head covering designed as a cap intended to be worn by surgical staff during an operation to protect both the patient and themselves from the transfer of microorganisms, body fluids, and particulate material. It is usually made of reinforced p...
A device designed to facilitate tracheostomy tube weaning and removal (decannulation), as well as voice restoration, for patients who have been chronic users of a tracheostomy tube. It is a small plastic cover (a cap), typically brightly coloured for easy i...
A covering intended to be used to seal the top of a test tube or reagent reservoir to protect the contents against contamination from the external environment, and to prevent spillage and/or evaporation of contents during transportation or processing. The t...
An invasive device, typically in the form of a detachable cap, designed to cover the exposed mechanical components at the distal end of an endoscope (e.g., duodenoscope) during an endoscopic procedure to protect the patient from injury. This is a single-use...
An implantable device designed to cover and protect the lead terminals of an implantable pacing device (e.g., an implanted pacemaker or defibrillator) during the implantation procedure, or to isolate (cap) any lead terminals that are not used. This device i...
A head covering designed as a cap intended to be worn by surgical staff during an operation to protect both the patient and themselves from the transfer of microorganisms, body fluids, and particulate material. It is usually made of woven materials. This is...
A small covering designed as a cap intended to be worn by a patient in infancy (an infant). It is primarily used to prevent loss of heat from the head and is typically made of fabric materials, e.g., cotton. This is a reusable garment.
A non-sterile head covering designed as a cap intended to be worn on the head of a patient to allow a healthcare professional to mark specific reference points on the head during a procedure [e.g., transcranial magnetic stimulation (TMS)] as an alternative ...
A head covering in the form of a cap intended to be worn by a patient typically during conditions of low body temperature and/or long surgical procedures to minimize loss of body heat from the head. It typically includes a heat-reflecting inner metal surfac...
A device designed to cover and protect the lead terminals of an implantable pacing device (e.g., an implanted pacemaker or defibrillator) during the implantation procedure, or to isolate (cap) any lead terminals that are not used. This device is implanted w...
A collection of various sterile pacing lead caps designed to cover and protect the lead terminals of an implantable pacing device (e.g., an implanted pacemaker or defibrillator) during the implantation procedure, or to isolate (cap) any lead terminals that ...
An invasive device, typically in the form of a detachable cap, designed to cover the exposed mechanical components at the distal end of an endoscope (e.g., duodenoscope) during an endoscopic procedure to protect the patient from injury. This is a reusable d...
A collection of various implantable pacing lead caps designed to cover and protect the lead terminals of an implantable pacing device (e.g., an implanted pacemaker or defibrillator) during the implantation procedure, or to isolate (cap) any lead terminals t...
A flexible polymer sheet/bag/sleeve designed to form a protective water-resistant enclosure around a piece of medical equipment/instrument (e.g., C-arm, surgical laser/camera/microscope, examination table/chair) and/or components (e.g., cables, tubes, headr...
A flexible polymer sheet/bag/sleeve designed to form a protective water-resistant enclosure around a piece of medical equipment (e.g., C-arm, surgical laser/camera/microscope, examination table/chair) and/or equipment components (e.g., cables, tubes, headre...
A flexible polymer sheet/bag/sleeve designed to form a protective water-resistant enclosure around a piece of medical equipment (e.g., C-arm, surgical laser/camera/microscope, examination table/chair) and/or equipment components (e.g., cables, tubes, headre...
A non-sterile flexible polymer sheet/bag/sleeve designed to form a protective water-resistant enclosure around a piece of medical equipment (e.g., C-arm, surgical laser/camera/microscope, examination table/chair) and/or equipment components (e.g., cables, t...
A small device intended to be used as a cover/cap for the external coil of a cochlear implant (CI) or auditory brainstem implant system, and/or to maintain the position of the coil casing. It is typically supplied with a removal tool. This is a reusable dev...
A noninvasive flexible polymer sheet/bag/sleeve designed to form a protective water-resistant enclosure around a piece of medical equipment (e.g., C-arm, surgical laser/camera/microscope, examination table/chair) and/or equipment components (e.g., cables, t...
A noninvasive flexible polymer sheet/bag/sleeve designed to form a protective water-resistant enclosure around a piece of medical equipment/instrument (e.g., C-arm, surgical laser/camera/microscope, examination table/chair) and/or components (e.g., cables, ...
A small device intended to be used as a cover/cap for a cochlear implant system coil, and/or to maintain the position of the coil casing. It is typically supplied with a removal tool. This is a reusable device.
A small device intended to be used as a cover/cap for the coil of a cochlear implant (CI) or auditory brainstem implant system, and/or to maintain the position of the coil casing. It is typically supplied with a removal tool. This is a reusable device.
A small, noninvasive, closed-ended attachment not designed according to ISO 80369 (non-ISO80369-standardized) intended to cover and close off (cap/plug) a luminal device associated with management of fluids (e.g., urological catheter, administration set, ba...
A plastic cap/cover designed to be placed onto the distal end of an endoscope to allow white balance and/or 3-D adjustment to be calibrated in the electronic control unit of the endoscope. This is a reusable device.