A small, implantable block threaded on its inside surface designed to be threaded outside a bone bolt or screw (not included) for secure fastening/stabilisation. It is not intended to be internally threaded to the bolt/screw (i.e., it is not a set screw). I...
A wire intended for the fixation of bone fractures that may be implanted or used short-term (e.g., to hold a plate in the correct position during an intervention). It may be used: 1) as a cerclage wire to aid bone fixation; 2) in a loop or figure-of-eight c...
A small device designed to be used during a surgical procedure to make a physical connection between two orthopaedic instruments, instrument components, or an orthopaedic instrument and another device (e.g., an implant) to facilitate the insertion and place...
A component of an external fixation system intended to be used to stabilize a fractured bone/joint. It may be a specially designed frame, clamp, rod, pin, rod-to-rod coupling, rod-to-pin coupling, post, fastener, wire, bolt, washer, nut, hinge, ring, socket...
A noninvasive structural component of an external orthopaedic fixation system intended for bone/joint fracture stabilization in conjunction with an invasive bone pin (not included). It is in the form of a full or partial ring, rod (e.g., straight, curved, t...
A non-sterile flat thin ring or plate designed to be used with a nut and bolt/screw to improve tightness in an orthopaedic fixation assembly. It may be made of metal, polymer, or reinforced polymer. This is a single-use device.
A device designed to prevent the drying of airway passages associated with the inhalation of oxygen (O2) by adding water vapour to the dry gas as it is passed through, or more seldom, over water. It typically consists of a graduated container (reservoir) fo...
An implantable, flat ring or plate designed to be used with a nut and bolt/screw to improve tightness in an orthopaedic, spinal, and/or craniofacial bone fixation assembly. It may be made of metal, polymer, or reinforced polymer. This is a single-use device.
A sterile flat thin ring or plate designed to be used with a nut and bolt/screw to improve tightness in an orthopaedic fixation assembly. It may be made of metal, polymer, or reinforced polymer. This is a single-use device.
A noninvasive, non-powered structural component of an external orthopaedic fixation system intended for bone/joint treatment (typically fracture stabilization, deformity correction, or distraction), in conjunction with an invasive bone pin (not included). I...
A noninvasive structural component of an external orthopaedic fixation system intended for bone/joint fracture stabilization in conjunction with an invasive bone pin (not included). It is in the form of a full or partial ring, rod (e.g., straight, curved, t...
A flat thin ring or plate typically used with a nut and bolt/screw to improve tightness in an orthopaedic fixation assembly. The washer may be made of metal, polymer, or reinforced polymer. This is a single-use device.
A noninvasive structural component of an external orthopaedic fixation system intended for bone/joint fracture stabilization in conjunction with an invasive bone pin (not included). It is in the form of a full or partial ring, rod (e.g., straight, curved, t...
A noninvasive, non-powered structural component of an external orthopaedic fixation system intended for bone/joint treatment (typically fracture stabilization, deformity correction, or distraction), in conjunction with an invasive bone pin (not included). I...
A component of a multi-device tool designed for compression of a femoral neck fracture during the implantation of a fixation femoral neck, head nail, and/or screw. It consists of one of a variety of devices: a double threaded wire, a tubular housing instrum...
A noninvasive, non-powered structural component of an external orthopaedic fixation system intended for bone/joint treatment (typically fracture stabilization, deformity correction, or distraction), in conjunction with an invasive bone pin (not included). I...