Cortical Fixation Systems
Cousin Biotech S.A.S.
Cousin Biotech S.A.S.
PMN#
ResCUBE™ Ligament Fixation System
Cousin Biotech S.A.S.
NAJA™ Ligament Correction System
Cousin Biotech S.A.S.
PREMIUM
COUSIN BIOTECH S.A.S.
BIOMESH CA.B.S. 'AIR COMPOSITE, MODELS: CABST1R05T, CABSAIRC7, CABSAIRC09
COUSIN BIOTECH S.A.S.
CABS'AIR
COUSIN BIOTECH S.A.S.
4DDOME
COUSIN BIOTECH
BIOMESH P1 AND BIOMESH PLUG AND PATCH
COUSIN BIOTECH S.A.R.L
GUDID#
ResCUBE™ - The ResCUBE™ System is a temporary spinal implant intended to provide temporary stabilization as a bone anchor during the development of solid bony fusion and aid in the repair of bone fractures. It consists of: - A ligament allowing correction and stabilization of the levels, after tensioning - A malleable leader allowing guidance of the ligament during surgery and attached to the ligament by a PET sheath. The lamella and shrink sleeve are not intended for long term implantation and must be removed after placement of the implant. - A low-profile connector holding the tension on the ligament
2024-01-05
Biomesh® CA.B.S.’Air® Composite - The BIOMESH® CA.B.S.'Air® Composite prosthesis consists of: - A parietal prosthesis made of an ePTFE and polypropylene plug, four polyethylene terephthalate with biocompatible colorant (D&C Green #6) and ePTFE fixation threads crimped of stainless steel needles. - A balloon which allows the deployment of the parietal prosthesis.
2015-10-23
Biomesh® CA.B.S.’Air® Composite - The BIOMESH® CA.B.S.'Air® Composite prosthesis consists of: - A parietal prosthesis made of an ePTFE and polypropylene plug, two polyethylene terephthalate with biocompatible colorant (D&C Green #6) and ePTFE fixation threads crimped of stainless steel needles. - A balloon which allows the deployment of the parietal prosthesis.
2015-10-23
BIOMESH®CA.B.S.'Air® - The BIOMESH® CA.B.S.'Air® prosthesis consists of (according to the references on the box): - A parietal prosthesis made of a plug and a polypropylene mesh and two polyethylene terephthalate and ePTFE fixation threads crimped of stainless steel needles. - A balloon which allows the deployment of the parietal prosthesis
2015-10-23
Biomesh® CA.B.S.’Air® Composite - The BIOMESH® CA.B.S.'Air® Composite prosthesis consists of: - A parietal prosthesis made of an ePTFE and polypropylene plug, two polyethylene terephthalate with biocompatible colorant (D&C Green #6) and ePTFE fixation threads crimped of stainless steel needles.
2015-10-23
BIOMESH®CA.B.S.'Air® - The BIOMESH® CA.B.S.'Air® prosthesis consists of (according to the references on the box): - A parietal prosthesis made of a plug and a polypropylene mesh and two polyethylene terephthalate and ePTFE fixation threads crimped of stainless steel needles. - A balloon which allows the deployment of the parietal prosthesis
2015-10-23
4DDOME ® - The device 4DDOME® consists of a dome and semi-resorbable reinforcement mesh for the anterior and posterior reinforcement.
2015-10-23
4DDOME ® - The device 4DDOME® consists of a dome and semi-resorbable reinforcement mesh for the anterior and posterior reinforcement.
2015-10-23
4DDOME ® - The device 4DDOME® consists of a dome and semi-resorbable reinforcement mesh for the anterior and posterior reinforcement.
2015-10-23
4DDOME® - The device 4DDOME® consists of a dome and semi-resorbable reinforcement mesh for the anterior and posterior reinforcement.
2015-10-23
4DDOME ® - The device 4DDOME® consists of a dome and semi-resorbable reinforcement mesh for the anterior and posterior reinforcement.
2015-10-23
4DDOME ® - The device 4DDOME® consists of a dome and semi-resorbable reinforcement mesh for the anterior and posterior reinforcement.
2015-10-23