These highlights do not include all the information needed to use CYCLOPHOSPHAMIDE safely and effectively. See full prescribing information for CYCLOPHOSPHAMIDE. CYCLOPHOSPHAMIDE for injection, for intravenous use Initial U.S. Approval: 1959

Cyclophosphamide by

Drug Labeling and Warnings

Cyclophosphamide by is a Prescription medication manufactured, distributed, or labeled by Bamboo US Bidco LCC, Baxter Healthcare Corporation, Baxter Oncology GmbH. Drug facts, warnings, and ingredients follow.

Drug Details [pdf]

CYCLOPHOSPHAMIDE- cyclophosphamide injection, powder, for solution 
Bamboo US Bidco LCC

----------

HIGHLIGHTS OF PRESCRIBING INFORMATION

These highlights do not include all the information needed to use CYCLOPHOSPHAMIDE safely and effectively. See full prescribing information for CYCLOPHOSPHAMIDE.

CYCLOPHOSPHAMIDE for injection, for intravenous use
Initial U.S. Approval: 1959

INDICATIONS AND USAGE

Cyclophosphamide is an alkylating drug indicated for treatment of:

  1. Malignant Diseases: malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1)
  2. Minimal Change Nephrotic Syndrome in Pediatric Patients:
    biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2)
    Limitations of Use:
    The safety and effectiveness for the treatment of nephrotic syndrome in adults of other renal disease has not been established.

DOSAGE AND ADMINISTRATION

Malignant Diseases: Adult and Pediatric Patients( 2.1)

  1. Intravenous: Initial course for patients with no hematologic deficiency: 40 mg per kg to 50 mg per kg in divided doses over 2 to 5 days. Other regimens include 10 mg per kg to 15 mg per kg given every 7 to 10 days or 3 mg per kg to 5 mg per kg twice weekly.
  2. Oral: Usually 1 mg per kg per day to 5 mg per kg per day for both initial and maintenance dosing.

Minimal Change Nephrotic Syndrome in Pediatric Patients( 2.2)

  1. Recommended oral dose: 2 mg per kg daily for 8 to 12 weeks (maximum cumulative dose 168 mg per kg). Treatment beyond 90 days increases the probability of sterility in males.

DOSAGE FORMS AND STRENGTHS

  1. Injection, sterile white powder: 500 mg, 1 g, and 2 g ( 3)

CONTRAINDICATIONS

  1. Hypersensitivity to cyclophosphamide ( 4)
  2. Urinary outflow obstruction ( 4)

WARNINGS AND PRECAUTIONS

  1. Myelosuppression, Immunosuppression, Bone Marrow Failure and Infections – Severe immunosuppression may lead to serious and sometimes fatal infections. Close hematological monitoring is required. ( 5.1)
  2. Urinary Tract and Renal Toxicity – Hemorrhagic cystitis, pyelitis, ureteritis, and hematuria can occur. Exclude or correct any urinary tract obstructions prior to treatment. ( 5.2)
  3. Cardiotoxicity – Myocarditis, myopericarditis, pericardial effusion, arrhythmias and congestive heart failure, which may be fatal, have been reported. Monitor patients, especially those with risk factors for cardiotoxicity or pre-existing cardiac disease. ( 5.3)
  4. Pulmonary Toxicity – Pneumonitis, pulmonary fibrosis and pulmonary veno-occlusive disease leading to respiratory failure may occur. Monitor patients for signs and symptoms of pulmonary toxicity. ( 5.4)
  5. Secondary malignancies ( 5.5)
  6. Veno-occlusive Liver Disease - Fatal outcome can occur. ( 5.6)
  7. Embryo-Fetal Toxicity - Can cause fetal harm. Advise female patients of reproductive potential to avoid pregnancy. ( 5.7, 8.1, 8.6)

ADVERSE REACTIONS

Adverse reactions reported most often include neutropenia, febrile neutropenia, fever, alopecia, nausea, vomiting, and diarrhea. ( 6.1)

To report SUSPECTED ADVERSE REACTIONS, contact Baxter Healthcare at 1-866-888-2472 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch

USE IN SPECIFIC POPULATIONS

  1. Nursing Mothers: Discontinue drug or nursing. ( 8.3)
  2. Females and males of reproductive potential: Counsel patients on pregnancy prevention and planning. ( 8.6)
  3. Renal Patients: Monitor for toxicity in patients with moderate and severe renal impairment. ( 8.7, 12.3)

See 17 for PATIENT COUNSELING INFORMATION.

Revised: 3/2017

FULL PRESCRIBING INFORMATION

1 INDICATIONS AND USAGE

1.1 Malignant Diseases

Cyclophosphamide is indicated for the treatment of:

  1. malignant lymphomas (Stages III and IV of the Ann Arbor staging system), Hodgkin’s disease, lymphocytic lymphoma (nodular or diffuse), mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma
  2. multiple myeloma
  3. leukemias: Chronic lymphocytic leukemia, chronic granulocytic leukemia (it is usually ineffective in acute blastic crisis), acute myelogenous and monocytic leukemia, acute lymphoblastic (stem-cell) leukemia (cyclophosphamide given during remission is effective in prolonging its duration)
  4. mycosis fungoides (advanced disease)
  5. neuroblastoma (disseminated disease)
  6. adenocarcinoma of the ovary
  7. retinoblastoma
  8. carcinoma of the breast

Cyclophosphamide, although effective alone in susceptible malignancies, is more frequently used concurrently or sequentially with other antineoplastic drugs.

1.2 Minimal Change Nephrotic Syndrome in Pediatric Patients:

Cyclophosphamide is indicated for the treatment of biopsy proven minimal change nephrotic syndrome in pediatrics patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy.

Limitations of Use:
The safety and effectiveness for the treatment of nephrotic syndrome in adults or other renal disease has not been established.

2 DOSAGE AND ADMINISTRATION

During or immediately after the administration, adequate amounts of fluid should be ingested or infused to force diuresis in order to reduce the risk of urinary tract toxicity. Therefore, cyclophosphamide should be administered in the morning.

2.1 Dosing of Malignant Diseases

Adults and Pediatric Patients

Intravenous
When used as the only oncolytic drug therapy, the initial course of cyclophosphamide for patients with no hematologic deficiency usually consists of 40 mg per kg to 50 mg per kg given intravenously in divided doses over a period of 2 to 5 days. Other intravenous regimens include 10 mg per kg to 15 mg per kg given every 7 to 10 days or 3 mg per kg to 5 mg per kg twice weekly.

Oral
Oral cyclophosphamide dosing is usually in the range of 1 mg per kg per day to 5 mg per kg per day for both initial and maintenance dosing.

Many other regimens of intravenous and oral cyclophosphamide have been reported. Dosages must be adjusted in accord with evidence of antitumor activity and/or leukopenia. The total leukocyte count is a good, objective guide for regulating dosage.

When cyclophosphamide is included in combined cytotoxic regimens, it may be necessary to reduce the dose of cyclophosphamide as well as that of the other drugs.

2.2 Dosing for Minimal Change Nephrotic Syndrome in Pediatric Patients

An oral dose of 2 mg per kg daily for 8 to 12 weeks (maximum cumulative dose 168 mg per kg) is recommended. Treatment beyond 90 days increases the probability of sterility in males [see Use in Specific Populations ( 8.4)].

2.3 Preparation, Handling and Administration

Handle and dispose of cyclophosphamide in a manner consistent with other cytotoxic drugs. 1Caution should be exercised when handling and preparing Cyclophosphamide for Injection, USP. To minimize the risk of dermal exposure, always wear gloves when handling vials containing Cyclophosphamide for Injection, USP.

Cyclophosphamide for Injection, USP

Intravenous Administration

Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. Do not use cyclophosphamide vials if there are signs of melting. Melted cyclophosphamide is a clear or yellowish viscous liquid usually found as a connected phase or in droplets in the affected vials.

Cyclophosphamide does not contain any antimicrobial preservative and thus care must be taken to assure the sterility of prepared solutions. Use aseptic technique.

For Direct Intravenous Injection

Reconstitute Cyclophosphamide with 0.9% Sodium Chloride Injection, USP only, using the volumes listed below in Table 1. Add the diluent to the vial and shake the vial vigorously to dissolve the drug completely. Do not use Sterile Water for Injection, USP because it results in a hypotonic solution and should not be injected directly.

Table 1: Reconstitution for Direct Intravenous Injection

Strength

Volume of
0.9% Sodium Chloride

Cyclophosphamide Concentration

500 mg

25 mL

20 mg per mL

1 g

50 mL

2 g

100 mL

For Intravenous Infusion

Reconstitution of Cyclophosphamide:
Reconstitute Cyclophosphamide using 0.9% Sodium Chloride Injection, USP or Sterile Water for Injection, USP with the volume of diluent listed below in Table 2. Add the diluent to the vial and shake the vial vigorously to dissolve the drug completely.

Table 2: Reconstitution in preparation for Intravenous Infusion

Strength

Volume of Diluent

Cyclophosphamide

Concentration

500 mg

25 mL

1 g

50 mL

20 mg per mL

2 g

100 mL

Dilution of Reconstituted Cyclophosphamide:
Further dilute the reconstituted Cyclophosphamide solution to a minimum concentration of 2 mg per mL with any of the following diluents:

  1. 5% Dextrose Injection, USP
  2. 5% Dextrose and 0.9% Sodium Chloride Injection, USP
  3. 0.45% Sodium Chloride Injection, USP

To reduce the likelihood of adverse reactions that appear to be administration rate-dependent (e.g., facial swelling, headache, nasal congestion, scalp burning), cyclophosphamide should be injected or infused very slowly. Duration of the infusion also should be appropriate for the volume and type of carrier fluid to be infused.

Storage of Reconstituted and Diluted Cyclophosphamide Solution:

If not used immediately, for microbiological integrity, cyclophosphamide solutions should be stored as described in Table 3.

Table 3: Storage of Cyclophosphamide Solutions
  • * Storage time is the total time cyclophosphamide is in solution including the time it is reconstituted in 0.9% Sterile Sodium Chloride Injection, USP or Sterile Water for Injection, USP.
  • Diluent

    Storage

    Room Temperature

    Refrigerated

    Reconstituted Solution( Without Further Dilution)

    0.9% Sodium Chloride Injection, USP

    up to 24 hrs

    Up to 6 days

    Sterile Water for Injection, USP

    Do not store; use immediately

    Diluted Solutions*

    0.45% Sodium Chloride Injection, USP

    up to 24 hrs

    up to 6 days

    5% Dextrose Injection, USP

    up to 24 hrs

    up to 36 hrs

    5% Dextrose and 0.9% Sodium Chloride Injection, USP

    up to 24 hrs

    up to 36 hrs

    Use of Reconstituted Solution for Oral Administration

    Liquid preparations of cyclophosphamide for oral administration may be prepared by dissolving cyclophosphamide for injection in Aromatic Elixir, National Formulary (NF). Such preparations should be stored under refrigeration in glass containers and used within 14 days.

    3 DOSAGE FORMS AND STRENGTHS

    Cyclophosphamide for Injection, USP is a sterile white powder available in

    1. 500 mg
    2. 1 g
    3. 2 g

    4 CONTRAINDICATIONS

    1. Hypersensitivity
    2. Cyclophosphamide is contraindicated in patients who have a history of severe hypersensitivity reactions to it, any of its metabolites, or to other components of the product. Anaphylactic reactions including death have been reported with cyclophosphamide. Possible cross-sensitivity with other alkylating agents can occur.
    3. Urinary Outflow Obstruction
    4. Cyclophosphamide is contraindicated in patients with urinary outflow obstruction [see Warnings and Precautions ( 5.2)].

    5 WARNINGS AND PRECAUTIONS

    5.1 Myelosuppression, Immunosuppression, Bone Marrow Failure and Infections

    Cyclophosphamide can cause myelosuppression (leukopenia, neutropenia, thrombocytopenia and anemia), bone marrow failure, and severe immunosuppression which may lead to serious and sometimes fatal infections, including sepsis and septic shock. Latent infections can be reactivated [see Adverse Reactions ( 6.2)].

    Antimicrobial prophylaxis may be indicated in certain cases of neutropenia at the discretion of the managing physician. In case of neutropenic fever, antibiotic therapy is indicated. Antimycotics and/or antivirals may also be indicated.

    Monitoring of complete blood counts is essential during cyclophosphamide treatment so that the dose can be adjusted, if needed. Cyclophosphamide should not be administered to patients with neutrophils ≤1,500/mm 3and platelets < 50,000/mm 3. Cyclophosphamide treatment may not be indicated, or should be interrupted, or the dose reduced, in patients who have or who develop a serious infection. G-CSF may be administered to reduce the risks of neutropenia complications associated with cyclophosphamide use. Primary and secondary prophylaxis with G-CSF should be considered in all patients considered to be at increased risk for neutropenia complications. The nadirs of the reduction in leukocyte count and thrombocyte count are usually reached in weeks 1 and 2 of treatment. Peripheral blood cell counts are expected to normalize after approximately 20 days. Bone marrow failure has been reported. Severe myelosuppression may be expected particularly in patients pretreated with and/or receiving concomitant chemotherapy and/or radiation therapy.

    5.2 Urinary Tract and Renal Toxicity

    Hemorrhagic cystitis, pyelitis, ureteritis, and hematuria have been reported with cyclophosphamide. Medical and/or surgical supportive treatment may be required to treat protracted cases of severe hemorrhagic cystitis. Discontinue cyclophosphamide therapy in case of severe hemorrhagic cystitis. Urotoxicity (bladder ulceration, necrosis, fibrosis, contracture and secondary cancer) may require interruption of cyclophosphamide treatment or cystectomy. Urotoxicity can be fatal. Urotoxicity can occur with short-term or long-term use of cyclophosphamide.

    Before starting treatment, exclude or correct any urinary tract obstructions [see Contraindications ( 4)]. Urinary sediment should be checked regularly for the presence of erythrocytes and other signs of urotoxicity and/or nephrotoxicity. Cyclophosphamide should be used with caution, if at all, in patients with active urinary tract infections. Aggressive hydration with forced diuresis and frequent bladder emptying can reduce the frequency and severity of bladder toxicity. Mesna has been used to prevent severe bladder toxicity.

    5.3 Cardiotoxicity

    Myocarditis, myopericarditis, pericardial effusion including cardiac tamponade, and congestive heart failure, which may be fatal, have been reported with cyclophosphamide therapy.

    Supraventricular arrhythmias (including atrial fibrillation and flutter) and ventricular arrhythmias (including severe QT prolongation associated with ventricular tachyarrhythmia) have been reported after treatment with regimens that included cyclophosphamide.

    The risk of cardiotoxicity may be increased with high doses of cyclophosphamide, in patients with advanced age, and in patients with previous radiation treatment to the cardiac region and/or previous or concomitant treatment with other cardiotoxic agents.

    Particular caution is necessary in patients with risk factors for cardiotoxicity and in patients with pre-existing cardiac disease.

    Monitor patients with risk factors for cardiotoxicity and with pre-existing cardiac disease.

    5.4 Pulmonary Toxicity

    Pneumonitis, pulmonary fibrosis, pulmonary veno-occlusive disease and other forms of pulmonary toxicity leading to respiratory failure have been reported during and following treatment with cyclophosphamide. Late onset pneumonitis (greater than 6 months after start of cyclophosphamide) appears to be associated with increased mortality. Pneumonitis may develop years after treatment with cyclophosphamide.

    Monitor patients for signs and symptoms of pulmonary toxicity.

    5.5 Secondary Malignancies

    Cyclophosphamide is genotoxic [see Nonclinical Toxicology ( 13.1)] . Secondary malignancies (urinary tract cancer, myelodysplasia, acute leukemias, lymphomas, thyroid cancer, and sarcomas) have been reported in patients treated with cyclophosphamide-containing regimens .The risk of bladder cancer may be reduced by prevention of hemorrhagic cystitis.

    5.6 Veno-occlusive Liver Disease

    Veno-occlusive liver disease (VOD) including fatal outcome has been reported in patients receiving cyclophosphamide-containing regimens. A cytoreductive regimen in preparation for bone marrow transplantation that consists of cyclophosphamide in combination with whole-body irradiation, busulfan, or other agents has been identified as a major risk factor. VOD has also been reported to develop gradually in patients receiving long-term low-dose immunosuppressive doses of cyclophosphamide. Other risk factors predisposing to the development of VOD include preexisting disturbances of hepatic function, previous radiation therapy of the abdomen, and a low performance status.

    5.7 Embryo-Fetal Toxicity

    Cyclophosphamide can cause fetal harm when administered to a pregnant woman [see Use in Specific Populations ( 8.1)] . Exposure to cyclophosphamide during pregnancy may cause birth defects, miscarriage, fetal growth retardation, and fetotoxic effects in the newborn. Cyclophosphamide is teratogenic and embryo-fetal toxic in mice, rats, rabbits and monkeys.

    Advise female patients of reproductive potential to avoid becoming pregnant and to use highly effective contraception during treatment and for up to 1 year after completion of therapy [see Use in Specific Populations ( 8.6)] .

    5.8 Infertility

    Male and female reproductive function and fertility may be impaired in patients being treated with cyclophosphamide. Cyclophosphamide interferes with oogenesis and spermatogenesis. It may cause sterility in both sexes. Development of sterility appears to depend on the dose of cyclophosphamide, duration of therapy, and the state of gonadal function at the time of treatment. Cyclophosphamide-induced sterility may be irreversible in some patients. Advise patients on the potential risks for infertility [see Use in Specific Populations ( 8.4and 8.6)] .

    5.9 Impairment of Wound Healing

    Cyclophosphamide may interfere with normal wound healing.

    5.10 Hyponatremia

    Hyponatremia associated with increased total body water, acute water intoxication, and a syndrome resembling SIADH (syndrome of inappropriate secretion of antidiuretic hormone), which may be fatal, has been reported.

    6 ADVERSE REACTIONS

    The following adverse reactions are discussed in more detail in other sections of the labeling.

    1. Hypersensitivity [see Contraindications ( 4) ]
    2. Myelosuppression, Immunosuppression, Bone Marrow Failure, and Infections [see Warnings and Precautions ( 5.1)]
    3. Urinary Tract and Renal Toxicity [see Warnings and Precautions ( 5.2)]
    4. Cardiotoxicity [see Warnings and Precautions ( 5.3)]
    5. Pulmonary Toxicity [see Warnings and Precautions ( 5.4)]
    6. Secondary Malignancies [see Warnings and Precautions ( 5.5)]
    7. Veno-occlusive Liver Disease [see Warnings and Precautions ( 5.6)]
    8. Embryo-Fetal Toxicity [see Warnings and Precautions ( 5.7)]
    9. Reproductive System Toxicity [see Warnings and Precautions ( 5.8) and Use in Specific Populations ( 8.4and 8.6)]
    10. Impaired Wound Healing [see Warnings and Precautions ( 5.9)]
    11. Hyponatremia [see Warnings and Precautions ( 5.10)]

    6.1 Common Adverse Reactions

    Hematopoietic system:
    Neutropenia occurs in patients treated with cyclophosphamide. The degree of neutropenia is particularly important because it correlates with a reduction in resistance to infections. Fever without documented infection has been reported in neutropenic patients.

    Gastrointestinal system:
    Nausea and vomiting occur with cyclophosphamide therapy. Anorexia and, less frequently, abdominal discomfort or pain and diarrhea may occur. There are isolated reports of hemorrhagic colitis, oral mucosal ulceration and jaundice occurring during therapy.

    Skin and its structures:
    Alopecia occurs in patients treated with cyclophosphamide. Skin rash occurs occasionally in patients receiving the drug. Pigmentation of the skin and changes in nails can occur.

    6.2 Postmarketing Experience

    The following adverse reactions have been identified from clinical trials or post-marketing surveillance. Because they are reported from a population from unknown size, precise estimates of frequency cannot be made.

    Cardiac:cardiac arrest, ventricular fibrillation, ventricular tachycardia, cardiogenic shock, pericardial effusion (progressing to cardiac tamponade), myocardial hemorrhage, myocardial infarction, cardiac failure (including fatal outcomes), cardiomyopathy, myocarditis, pericarditis, carditis, atrial fibrillation, supraventricular arrhythmia, ventricular arrhythmia, bradycardia, tachycardia, palpitations, QT prolongation.

    Congenital, Familial and Genetic: intra-uterine death, fetal malformation, fetal growth retardation, fetal toxicity (including myelosuppression, gastroenteritis).

    Ear and Labyrinth:deafness, hearing impaired, tinnitus.

    Endocrine:water intoxication.

    Eye:visual impairment, conjunctivitis, lacrimation.

    Gastrointestinal:gastrointestinal hemorrhage, acute pancreatitis, colitis, enteritis, cecitis, stomatitis, constipation, parotid gland inflammation.

    General Disorders and Administrative Site Conditions:multiorgan failure, general physical deterioration, influenza-like illness, injection/infusion site reactions (thrombosis, necrosis, phlebitis, inflammation, pain, swelling, erythema), pyrexia, edema, chest pain, mucosal inflammation, asthenia, pain, chills, fatigue, malaise, headache.

    Hematologic:myelosuppression, bone marrow failure, disseminated intravascular coagulation and hemolytic uremic syndrome (with thrombotic microangiopathy).

    Hepatic:veno-occlusive liver disease, cholestatic hepatitis, cytolytic hepatitis, hepatitis, cholestasis; hepatotoxicity with hepatic failure, hepatic encephalopathy, ascites, hepatomegaly, blood bilirubin increased, hepatic function abnormal, hepatic enzymes increased.

    Immune:immunosuppression, anaphylactic shock and hypersensitivity reaction.

    Infections:The following manifestations have been associated with myelosuppression and immunosuppression caused by cyclophosphamide: increased risk for and severity of pneumonias (including fatal outcomes), other bacterial, fungal, viral, protozoal and, parasitic infections; reactivation of latent infections, (including viral hepatitis, tuberculosis), Pneumocystis jiroveci, herpes zoster, Strongyloides, sepsis and septic shock.

    Investigations:blood lactate dehydrogenase increased, C-reactive protein increased.

    Metabolism and Nutrition:hyponatremia, fluid retention, blood glucose increased, blood glucose decreased.

    Musculoskeletal and Connective Tissue: rhabdomyolysis, scleroderma, muscle spasms, myalgia, arthralgia.

    Neoplasms:acute leukemia, myelodysplastic syndrome, lymphoma, sarcomas, renal cell carcinoma, renal pelvis cancer, bladder cancer, ureteric cancer, thyroid cancer.

    Nervous System:encephalopathy, convulsion, dizziness, neurotoxicity has been reported and manifested as reversible posterior leukoencephalopathy syndrome, myelopathy, peripheral neuropathy, polyneuropathy, neuralgia, dysesthesia, hypoesthesia, paresthesia, tremor, dysgeusia, hypogeusia, parosmia.

    Pregnancy:premature labor.

    Psychiatric:confusional state.

    Renal and Urinary:renal failure, renal tubular disorder, renal impairment, nephropathy toxic, hemorrhagic cystitis, bladder necrosis, cystitis ulcerative, bladder contracture, hematuria, nephrogenic diabetes insipidus, atypical urinary bladder epithelial cells.

    Reproductive System:infertility, ovarian failure, ovarian disorder, amenorrhea, oligomenorrhea, testicular atrophy, azoospermia, oligospermia.

    Respiratory:pulmonary veno-occlusive disease, acute respiratory distress syndrome, interstitial lung disease as manifested by respiratory failure (including fatal outcomes), obliterative bronchiolitis, organizing pneumonia, alveolitis allergic, pneumonitis, pulmonary hemorrhage; respiratory distress, pulmonary hypertension, pulmonary edema, pleural effusion, bronchospasm, dyspnea, hypoxia, cough, nasal congestion, nasal discomfort, oropharyngeal pain, rhinorrhea.

    Skin and Subcutaneous Tissue:toxic epidermal necrolysis, Stevens-Johnson syndrome, erythema multiforme, palmar-plantar erythrodysesthesia syndrome, radiation recall dermatitis, toxic skin eruption, urticaria, dermatitis, blister, pruritus, erythema, nail disorder, facial swelling, hyperhidrosis.

    Tumor lysis syndrome :like other cytotoxic drugs, cyclophosphamide may induce tumor-lysis syndrome and hyperuricemia in patients with rapidly growing tumors.

    Vascular:pulmonary embolism, venous thrombosis, vasculitis, peripheral ischemia, hypertension, hypotension, flushing, hot flush.

    7 DRUG INTERACTIONS

    Cyclophosphamide is a pro-drug that is activated by cytochrome P450s [ see Clinical Pharmacology ( 12.3) ].

    An increase of the concentration of cytotoxic metabolites may occur with:

    1. Protease inhibitors: Concomitant use of protease inhibitors may increase the concentration of cytotoxic metabolites. Use of protease inhibitor-based regimens was found to be associated with a higher incidence of infections and neutropenia in patients receiving cyclophosphamide, doxorubicin, and etoposide (CDE) than use of a Non-Nucleoside Reverse Transcriptase Inhibitor-based regimen.

    Combined or sequential use of cyclophosphamide and other agents with similar toxicities can potentiate toxicities.

    1. Increased hematotoxicity and/or immunosuppression may result from a combined effect of cyclophosphamide and, for example:
      1. ACE inhibitors: ACE inhibitors can cause leukopenia.
      2. Natalizumab
      3. Paclitaxel: Increased hematotoxicity has been reported when cyclophosphamide was administered after paclitaxel infusion.
      4. Thiazide diuretics
      5. Zidovudine
    2. Increased cardiotoxicity may result from a combined effect of cyclophosphamide and, for example:
      1. Anthracyclines
      2. Cytarabine
      3. Pentostatin
      4. Radiation therapy of the cardiac region
      5. Trastuzumab
    3. Increased pulmonary toxicity may result from a combined effect of cyclophosphamide and, for example:
      1. Amiodarone
      2. G-CSF, GM-CSF (granulocyte colony-stimulating factor, granulocyte macrophage colony-stimulating factor): Reports suggest an increased risk of pulmonary toxicity in patients treated with cytotoxic chemotherapy that includes cyclophosphamide and G-CSF or GMCSF.
    4. Increased nephrotoxicity may result from a combined effect of cyclophosphamide and, for example:
      1. Amphotericin B
      2. Indomethacin: Acute water intoxication has been reported with concomitant use of indomethacin
    5. Increase in other toxicities:
      1. Azathioprine: Increased risk of hepatotoxicity (liver necrosis)
      2. Busulfan: Increased incidence of hepatic veno-occlusive disease and mucositis has been reported.
      3. Protease inhibitors: Increased incidence of mucositis
    6. Increased risk of hemorrhagic cystitis may result from a combined effect of cyclophosphamide and past or concomitant radiation treatment.

    Etanercept: In patients with Wegener’s granulomatosis, the addition of etanercept to standard treatment, including cyclophosphamide, was associated with a higher incidence of non-cutaneous malignant solid tumors.

    Metronidazole: Acute encephalopathy has been reported in a patient receiving cyclophosphamide and metronidazole. Causal association is unclear. In an animal study, the combination of cyclophosphamide with metronidazole was associated with increased cyclophosphamide toxicity.

    Tamoxifen: Concomitant use of tamoxifen and chemotherapy may increase the risk of thromboembolic complications.

    Coumarins: Both increased and decreased warfarin effect have been reported in patients receiving warfarin and cyclophosphamide.

    Cyclosporine: Lower serum concentrations of cyclosporine have been observed in patients receiving a combination of cyclophosphamide and cyclosporine than in patients receiving only cyclosporine. This interaction may result in an increased incidence of graft-versus-host disease.

    Depolarizing muscle relaxants: Cyclophosphamide treatment causes a marked and persistent inhibition of cholinesterase activity. Prolonged apnea may occur with concurrent depolarizing muscle relaxants (e.g., succinylcholine). If a patient has been treated with cyclophosphamide within 10 days of general anesthesia, alert the anesthesiologist.

    8 USE IN SPECIFIC POPULATIONS

    8.1 Pregnancy

    Pregnancy Category D

    Risk Summary
    Cyclophosphamide can cause fetal harm when administered to a pregnant woman based on its mechanism of action and published reports of effects in pregnant patients or animals. Exposure to cyclophosphamide during pregnancy may cause fetal malformations, miscarriage, fetal growth retardation, and toxic effects in the newborn. Cyclophosphamide is teratogenic and embryo-fetal toxic in mice, rats, rabbits and monkeys. If this drug is used during pregnancy, or if the patient becomes pregnant while taking this drug, apprise the patient of the potential hazard to a fetus.

    Human Data
    Malformations of the skeleton, palate, limbs and eyes as well as miscarriage have been reported after exposure to cyclophosphamide in the first trimester. Fetal growth retardation and toxic effects manifesting in the newborn, including leukopenia, anemia, pancytopenia, severe bone marrow hypoplasia, and gastroenteritis have been reported after exposure to cyclophosphamide.

    Animal Data
    Administration of cyclophosphamide to pregnant mice, rats, rabbits and monkeys during the period of organogenesis at doses at or below the dose in patients based on body surface area resulted in various malformations, which included neural tube defects, limb and digit defects and other skeletal anomalies, cleft lip and palate, and reduced skeletal ossification.

    8.3 Nursing Mothers

    Cyclophosphamide is present in breast milk. Neutropenia, thrombocytopenia, low hemoglobin, and diarrhea have been reported in infants breast fed by women treated with cyclophosphamide. Because of the potential for serious adverse reactions in nursing infants from cyclophosphamide, a decision should be made whether to discontinue nursing or to discontinue the drug, taking into account the importance of the drug to the mother.

    8.4 Pediatric Use

    Pre-pubescent girls treated with cyclophosphamide generally develop secondary sexual characteristics normally and have regular menses. Ovarian fibrosis with apparently complete loss of germ cells after prolonged cyclophosphamide treatment in late pre-pubescence has been reported. Girls treated with cyclophosphamide who have retained ovarian function after completing treatment are at increased risk of developing premature menopause.

    Pre-pubescent boys treated with cyclophosphamide develop secondary sexual characteristics normally, but may have oligospermia or azoospermia and increased gonadotropin secretion. Some degree of testicular atrophy may occur. Cyclophosphamide-induced azoospermia is reversible in some patients, though the reversibility may not occur for several years after cessation of therapy.

    8.5 Geriatric Use

    There is insufficient data from clinical studies of cyclophosphamide available for patients 65 years of age and older to determine whether they respond differently than younger patients. In general, dose selection for an elderly patient should be cautious, usually starting at the low end of the dosing range, reflecting the greater frequency of decreased hepatic, renal, or cardiac functioning, and of concomitant disease or other drug therapy.

    8.6 Females and Males of Reproductive Potential

    Contraception
    Pregnancy should be avoided during treatment with cyclophosphamide because of the risk of fetal harm [see Use in Specific Populations ( 8.1)].

    Female patients of reproductive potential should use highly effective contraception during and for up to 1 year after completion of treatment.

    Male patients who are sexually active with female partners who are or may become pregnant should use a condom during and for at least 4 months after treatment.

    Infertility
    Females
    Amenorrhea, transient or permanent, associated with decreased estrogen and increased gonadotropin secretion develops in a proportion of women treated with cyclophosphamide. Affected patients generally resume regular menses within a few months after cessation of therapy. The risk of premature menopause with cyclophosphamide increases with age. Oligomenorrhea has also been reported in association with cyclophosphamide treatment.

    Animal data suggest an increased risk of failed pregnancy and malformations may persist after discontinuation of cyclophosphamide as long as oocytes/follicles exist that were exposed to cyclophosphamide during any of their maturation phases. The exact duration of follicular development in humans is not known, but may be longer than 12 months [see Nonclinical Toxicology ( 13.1)] .

    Males
    Men treated with cyclophosphamide may develop oligospermia or azoospermia which are normally associated with increased gonadotropin but normal testosterone secretion.

    8.7 Use in Patients with Renal Impairment

    In patients with severe renal impairment, decreased renal excretion may result in increased plasma levels of cyclophosphamide and its metabolites. This may result in increased toxicity [see Clinical Pharmacology ( 12.3)] . Monitor patients with severe renal impairment (CrCl =10 mL/min to 24 mL/min) for signs and symptoms of toxicity.

    Cyclophosphamide and its metabolites are dialyzable although there are probably quantitative differences depending upon the dialysis system being used. In patients requiring dialysis, use of a consistent interval between cyclophosphamide administration and dialysis should be considered.

    8.8 Use in Patients with Hepatic Impairment

    Patients with severe hepatic impairment have reduced conversion of cyclophosphamide to the active 4-hydroxyl metabolite, potentially reducing efficacy [see Clinical Pharmacology ( 12.3)] .

    10 OVERDOSAGE

    No specific antidote for cyclophosphamide is known.

    Overdosage should be managed with supportive measures, including appropriate treatment for any concurrent infection, myelosuppression, or cardiac toxicity should it occur.

    Serious consequences of overdosage include manifestations of dose dependent toxicities such as myelosuppression, urotoxicity, cardiotoxicity (including cardiac failure), veno-occlusive hepatic disease, and stomatitis [see Warnings and Precautions ( 5.1, 5.2, 5.3and 5.6)] .

    Patients who received an overdose should be closely monitored for the development of toxicities, and hematologic toxicity in particular.

    Cyclophosphamide and its metabolites are dialyzable. Therefore, rapid hemodialysis is indicated when treating any suicidal or accidental overdose or intoxication.

    Cystitis prophylaxis with mesna may be helpful in preventing or limiting urotoxic effects with cyclophosphamide overdose.

    11 DESCRIPTION

    Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula:

    Cyclophosphamide Structural Formula

    Cyclophosphamide is a white crystalline powder with the molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol.

    Cyclophosphamide for Injection, USP is a sterile white powder available as 500 mg, 1 g, and 2 g strength vials.

    1. 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide
    2. 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide
    3. 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide

    12 CLINICAL PHARMACOLOGY

    12.1 Mechanism of Action

    The mechanism of action is thought to involve cross-linking of tumor cell DNA.

    12.2 Pharmacodynamics

    Cyclophosphamide is biotransformed principally in the liver to active alkylating metabolites by a mixed function microsomal oxidase system. These metabolites interfere with the growth of susceptible rapidly proliferating malignant cells.

    12.3 Pharmacokinetics

    Following IV administration, elimination half-life (t ½) ranges from 3 to 12 hours with total body clearance (CL) values of 4 to 5.6 L/h. Pharmacokinetics are linear over the dose range used clinically. When cyclophosphamide was administered at 4.0 g/m 2over a 90 minutes infusion, saturable elimination in parallel with first-order renal elimination describe the kinetics of the drug.

    Absorption
    After oral administration, peak concentrations of cyclophosphamide occurred at one hour. Area under the curve ratio for the drug after oral and IV administration (AUC po: AUC iv) ranged from 0.87 to 0.96.

    Distribution
    Approximately 20% of cyclophosphamide is protein bound, with no dose dependent changes. Some metabolites are protein bound to an extent greater than 60%. Volume of distribution approximates total body water (30 to 50 L).

    Metabolism
    The liver is the major site of cyclophosphamide activation. Approximately 75% of the administered dose of cyclophosphamide is activated by hepatic microsomal cytochrome P450s including CYP2A6, 2B6, 3A4, 3A5, 2C9, 2C18 and 2C19, with 2B6 displaying the highest 4-hydroxylase activity. Cyclophosphamide is activated to form 4-hydroxycyclophosphamide, which is in equilibrium with its ring-open tautomer aldophosphamide. 4-hydroxycyclophosphamide and aldophosphamide can undergo oxidation by aldehyde dehydrogenases to form the inactive metabolites 4-ketocyclophosphamide and carboxyphosphamide, respectively. Aldophosphamide can undergo β-elimination to form active metabolites phosphoramide mustard and acrolein. This spontaneous conversion can be catalyzed by albumin and other proteins. Less than 5% of cyclophosphamide may be directly detoxified by side chain oxidation, leading to the formation of inactive metabolites 2-dechloroethylcyclophosphamide. At high doses, the fraction of parent compound cleared by 4-hydroxylation is reduced resulting in non-linear elimination of cyclophosphamide in patients. Cyclophosphamide appears to induce its own metabolism. Auto-induction results in an increase in the total clearance, increased formation of 4-hydroxyl metabolites and shortened t 1/2values following repeated administration at 12- to 24-hour interval.

    Elimination
    Cyclophosphamide is primarily excreted as metabolites. 10 to 20% is excreted unchanged in the urine and 4% is excreted in the bile following IV administration.

    Special Populations

    Renal Impairment
    The pharmacokinetics of cyclophosphamide were determined following one-hour intravenous infusion to renally impaired patients. The results demonstrated that the systemic exposure to cyclophosphamide increased as the renal function decreased. Mean dose-corrected AUC increased by 38% in the moderate renal group, (Creatinine clearance (CrCl of 25 to 50 mL/min), by 64% in the severe renal group (CrCl of 10 to 24 mL/min) and by 23% in the hemodialysis group (CrCl of < 10 mL/min) compared to the control group. The increase in exposure was significant in the severe group (p>0.05); thus, patients with severe renal impairment should be closely monitored for toxicity [see Use in Specific Populations ( 8.7)] .

    The dialyzability of cyclophosphamide was investigated in four patients on long-term hemodialysis. Dialysis clearance calculated by arterial-venous difference and actual drug recovery in dialysate averaged 104 mL/min, which is in the range of the metabolic clearance of 95 mL/min for the drug. A mean of 37% of the administered dose of cyclophosphamide was removed during hemodialysis. The elimination half-life (t 1/2) was 3.3 hours in patients during hemodialysis, a 49% reduction of the 6.5 hours to t 1/2reported in uremic patients. Reduction in t 1/2, larger dialysis clearance than metabolic clearance, high extraction efficiency, and significant drug removal during dialysis, suggest that cyclophosphamide is dialyzable.

    Hepatic Impairment
    Total body clearance (CL) of cyclophosphamide is decreased by 40% in patients with severe hepatic impairment and elimination half-life (t ½) is prolonged by 64%. Mean CL and t ½were 45 ± 8.6 L/kg and 12.5 ± 1.0 hours respectively, in patients with severe hepatic impairment and 63 ± 7.6 L/kg and 7.6 ± 1.4 hours respectively in the control group [see Use in Specific Populations ( 8.8)] .

    13 NONCLINICAL TOXICOLOGY

    13.1 Carcinogenesis, Mutagenesis, Impairment of Fertility

    Cyclophosphamide administered by different routes, including intravenous, subcutaneous or intraperitoneal injection, or in drinking water, caused tumors in both mice and rats. In addition to leukemia and lymphoma, benign and malignant tumors were found at various tissue sites, including urinary bladder, mammary gland, lung, liver, and injection site [see Warnings and Precautions ( 5.5)] .

    Cyclophosphamide was mutagenic and clastogenic in multiple in vitroand in vivogenetic toxicology studies.

    Cyclophosphamide is genotoxic in male and female germ cells. Animal data indicate that exposure of oocytes to cyclophosphamide during follicular development may result in a decreased rate of implantations and viable pregnancies, and in an increased risk of malformations. Male mice and rats treated with cyclophosphamide show alterations in male reproductive organs (e.g., decreased weights, atrophy, changes in spermatogenesis), and decreases in reproductive potential (e.g., decreased implantations and increased post-implantation loss) and increases in fetal malformations when mated with untreated females [see Use in Specific Populations ( 8.6)] .

    15 REFERENCES

    1. OSHA Hazardous Drugs. OSHA. http://www.osha.gov/SLTC/hazardousdrugs/index.html.

    16 HOW SUPPLIED/STORAGE AND HANDLING

    Cyclophosphamide for Injection, USP is a sterile white powder containing cyclophosphamide and is supplied in vials for single dose use.

    Cyclophosphamide for Injection, USP

    1. NDC: 10019-955-01 500 mg vial, carton of 1
      NDC: 10019-956-01 1 g vial, carton of 1
      NDC: 10019-957-01 2 g vial, carton of 1

    Store vials at or below 25°C (77°F). During transport or storage of cyclophosphamide vials, temperature influences can lead to melting of the active ingredient, cyclophosphamide. [see Dosage and Administration ( 2.3)] .

    Cyclophosphamide is an antineoplastic product. Follow special handling and disposal procedures. 1

    17 PATIENT COUNSELING INFORMATION

    Advise the patient of the following:

    1. Inform patients of the possibility of myelosuppression, immunosuppression, and infections. Explain the need for routine blood cell counts. Instruct patients to monitor their temperature frequently and immediately report any occurrence of fever [see Warnings and Precautions ( 5.1)].
    2. Advise the patient to report urinary symptoms (patients should report if their urine has turned a pink or red color) and the need for increasing fluid intake and frequent voiding [see Warnings and Precautions ( 5.2)].
    3. Advise patients to contact a healthcare professional immediately for any of the following: new onset or worsening shortness of breath, cough, swelling of the ankles/legs, palpitations, weight gain of more than 5 pounds in 24 hours, dizziness or loss of consciousness [see Warnings and Precautions ( 5.3)] .
    4. Warn patients of the possibility of developing non-infectious pneumonitis. Advise patients to report promptly any new or worsening respiratory symptoms [see Warnings and Precautions ( 5.4)] .
    5. Advise female patients of reproductive potential to use highly effective contraception during treatment and for up to 1 year after completion of therapy. There is a potential for harm to a fetus if a patient becomes pregnant during this period. Patients should immediately contact their healthcare provider if they become pregnant or if pregnancy is suspected during this period [see Warnings and Precautions ( 5.7) and Use in Specific Populations ( 8.1)] .
    6. Advise male patients who are sexually active with a female partner who is or may become pregnant to use condoms during treatment and for up to 4 months after completion of therapy. There is a potential for harm to a fetus if a patient fathers a child during this period. Patients should immediately contact their healthcare provider if their female partner becomes pregnant or if pregnancy is suspected during this period [see Warnings and Precautions ( 5.7) and Use in Specific Populations ( 8.1)] .
    7. Advise nursing mothers treated with cyclophosphamide to discontinue nursing or discontinue cyclophosphamide, taking into account the importance of the drug to the mother [see Use in Specific Populations ( 8.3)].
    8. Explain to patients that side effects such as nausea, vomiting, stomatitis, impaired wound healing, amenorrhea, premature menopause, sterility and hair loss may be associated with cyclophosphamide administration. Other undesirable effects (including, e.g., dizziness, blurred vision, visual impairment) could affect the ability to drive or use machines [see Adverse Reactions ( 6.1and 6.2)] .

    Manufactured by:

    Baxter Healthcare Corporation
    Deerfield, IL 60015 USA

    Product Made in Germany

    Baxter is a trademark of Baxter International Inc.

    HA-30-01-720

    PACKAGE LABEL - PRINCIPAL DISPLAY PANEL

    Cyclophosphamide Baxter Representative Container LBL 10019-955-50_HA6501628

    LOT/EXP:

    NDC: 10019-955-50

    Cyclophosphamide
    for Injection, USP

    500 mg/vial CYTOTOXIC AGENT

    FOR SINGLE DOSE USE
    STERILE, NON-PYROGENIC
    FOR PARENTERAL USE

    Rx only

    Baxter Logo
    Manufactured by Baxter Healthcare Corporation
    Deerfield, IL 60015 USA
    Made in Germany
    460-629-01

    Each vial contains 500 mg cyclophosphamide.

    For IV Infusion Use:Add 25 mL Sterile
    Water for Injection, USP, and shake
    vigorously to dissolve the drug.

    For Direct Injection Use:Add 25 mL
    0.9% Sodium Chloride Injection, USP,
    and shake vigorously to dissolve
    the drug.

    See insert for indications and dosage
    schedule. Store vial at or below 25˚C
    (77˚F) [see USP Controlled Room
    Temperature].

    Bar Code
    (01)00310019955506

    USA HA-65-01-628 C 273

    Bar Code

    Cyclophosphamide Baxter Representative Carton Lbl 10019-955-01 panel 1 of 2
    Cyclophosphamide Baxter Representative Carton Lbl 10019-955-01 panel 2 of 2

    NDC: 10019-955-01

    Cyclophosphamide
    for Injection, USP

    500 mg/vial
    Rx only

    MUST BE DILUTED
    FOR IV INFUSION
    OR DIRECT INJECTION USE

    1 Single Dose Vial

    Baxter Logo
    Manufactured by
    Baxter Healthcare Corporation
    Deerfield, IL 60015 USA
    Made in Germany

    Cyclophosphamide
    for Injection, USP

    500 mg/vial

    Bar Code

    HA-80-02-313
    USA

    Each vial contains 500 mg cyclophosphamide.

    For IV Infusion Use:Add 25 mL Sterile Water
    for Injection, USP, and shake vigorously to
    dissolve the drug.

    For Direct Injection Use:Add 25 mL 0.9%
    Sodium Chloride Injection, USP, and shake
    vigorously to dissolve the drug.

    Store vial at or below 25°C (77°F)
    [see USP Controlled Room Temperature].

    DOSAGE:See accompanying literature for
    directions for use. Should not be prescribed
    without thorough knowledge of dose,
    indications and toxicity as contained in
    accompanying literature.

    CYTOTOXIC AGENT

    FOR SINGLE DOSE USE
    STERILE, NON-PYROGENIC
    FOR PARENTERAL USE

    460-630-01

    C
    628

    NDC: 10019-955-01

    Cyclophosphamide
    for Injection, USP

    500 mg/vial
    Rx only

    MUST BE DILUTED
    FOR IV INFUSION
    OR DIRECT INJECTION USE

    1 Single Dose Vial

    Baxter Logo
    Manufactured by
    Baxter Healthcare Corporation
    Deerfield, IL 60015 USA
    Made in Germany

    LOT /EXP:

    2638B5071

    Barcode

    FOLDING BOX
    CAN BE RECYCLED Symbol

    NDC: 10019-955-01

    Cyclophosphamide
    for Injection, USP

    500 mg/vial
    Rx only

    MUST BE DILUTED
    FOR IV INFUSION
    OR DIRECT INJECTION USE

    1 Single Dose Vial

    Baxter Logo
    Manufactured by
    Baxter Healthcare Corporation
    Deerfield, IL 60015 USA
    Made in Germany

    Cyclophosphamide Baxter Representative Container LBL 10019-956-16_HA6501629

    LOT/EXP:

    NDC: 10019-956-16

    Cyclophosphamide
    for Injection, USP

    1 gram/vial CYTOTOXIC AGENT

    FOR SINGLE DOSE USE
    STERILE, NON-PYROGENIC
    FOR PARENTERAL USE

    Rx only

    Baxter Logo
    Manufactured by Baxter Healthcare Corporation
    Deerfield, IL 60015 USA
    Made in Germany
    460-631-01

    Each vial contains 1 g cyclophosphamide.

    For IV Infusion Use:Add 50 mL Sterile
    Water for Injection, USP, and shake
    vigorously to dissolve the drug.

    For Direct Injection Use:Add 50 mL
    0.9% Sodium Chloride Injection,
    USP, and shake vigorously to dissolve
    the drug.

    See insert for indications and dosage
    schedule. Store vial at or below 25˚C
    (77˚F) [see USP Controlled Room
    Temperature].

    Bar Code
    (01)00310019956169

    USAHA-65-01-629
    C 270

    Bar Code

    Representative Cyclophosphamide Baxter Carton Lbl 10019-956-01 panel 1
    Representative Cyclophosphamide Baxter Carton Lbl 10019-956-01 panel 2

    NDC: 10019-956-01

    Cyclophosphamide
    for Injection, USP

    1 gram/vial
    Rx only

    MUST BE DILUTED
    FOR IV INFUSION
    OR DIRECT INJECTION USE

    1 Single Dose Vial

    Baxter Logo
    Manufactured by
    Baxter Healthcare Corporation
    Deerfield, IL 60015 USA
    Made in Germany

    Cyclophosphamide
    for Injection, USP

    1 gram/vial

    HA-80-02-314
    USA

    Each vial contains 1 g cyclophosphamide.

    For IV Infusion Use:Add 50 mL Sterile Water
    for Injection, USP, and shake vigorously to
    dissolve the drug.

    For Direct Injection Use:Add 50 mL 0.9%
    Sodium Chloride Injection, USP, and shake
    vigorously to dissolve the drug.

    Store vial at or below 25°C 77°F)
    [see USP Controlled Room Temperature].

    DOSAGE:See accompanying literature for
    directions for use. Should not be prescribed
    without thorough knowledge of dose,
    indications and toxicity as contained in
    accompanying literature.

    CYTOTOXIC AGENT

    FOR SINGLE DOSE USE
    STERILE, NON-PYROGENIC
    FOR PARENTERAL USE

    460-632-01

    C
    626

    NDC: 10019-956-01

    Cyclophosphamide
    for Injection, USP

    1 gram/vial Rx only

    MUST BE DILUTED
    FOR IV INFUSIONOR
    DIRECT INJECTION USE

    1 Single Dose Vial

    Baxter Logo
    Manufactured by
    Baxter Healthcare Corporation
    Deerfield, IL 60015 USA
    Made in Germany

    LOT /EXP:

    2638B5072

    Barcode

    FOLDING BOX
    CAN BE RECYCLED Symbol

    NDC: 10019-956-01

    Cyclophosphamide
    for Injection, USP

    1 gram/vial
    Rx only

    MUST BE DILUTED
    FOR IV INFUSIONOR
    DIRECT INJECTION USE

    1 Single Dose Vial

    Baxter Logo
    Manufactured by
    Baxter Healthcare Corporation
    Deerfield, IL 60015 USA
    Made in Germany

    Cyclophosphamide Baxter Representative Container LBL 10019-957-11_HA6501630

    LOT/EXP:

    NDC: 10019-957-11

    Cyclophosphamide
    for Injection, USP

    2 gram/vial CYTOTOXIC AGENT

    FOR SINGLE DOSE USE
    STERILE, NON-PYROGENIC
    FOR PARENTERAL USE

    Rx only

    Baxter Logo
    Manufactured by Baxter Healthcare Corporation
    Deerfield, IL 60015 USA
    Made in Germany
    460-633-01

    Each vial contains 2 g cyclophosphamide.

    For IV Infusion Use:Add 100 mL
    Sterile Water for Injection, USP, and
    shake vigorously to dissolve the drug.

    For Direct Injection Use:Add 100 mL
    0.9% Sodium Chloride Injection, USP,
    and shake vigorously to dissolve
    the drug.

    See insert for indications and dosage
    schedule. Store vial at or below 25˚C
    (77˚F) [see USP Controlled Room
    Temperature].

    Barcode

    (01)00310019957111

    USAHA-65-01-630
    C271

    Cyclophosphamide Representative Baxter Carton Lbl 10019-957-01 panel 1
    Cyclophosphamide Representative Baxter Carton Lbl 10019-957-01 panel 2

    NDC: 10019-957-01

    Cyclophosphamide
    for Injection, USP

    2 gram/vial
    Rx only

    MUST BE DILUTED
    FOR IV INFUSION
    OR DIRECT INJECTION USE

    1 Single Dose Vial

    BaxterLogo
    Manufactured by
    Baxter Healthcare Corporation
    Deerfield, IL 60015 USA
    Made in Germany

    Cyclophosphamide
    for Injection, USP

    2 gram/vial

    Bar Code

    HA-80-02-315
    USA

    Each vial contains 2 g cyclophosphamide.

    For IV Infusion Use:Add 100 mL Sterile
    Water for Injection, USP, and shake vigorously to
    dissolve the drug.

    For Direct Injection Use:Add 100 mL
    0.9% Sodium Chloride Injection, USP, and
    shake vigorously to dissolve the drug.

    Store vial at or below 25°C 77°F)
    [see USP Controlled Room Temperature].

    DOSAGE:See accompanying literature
    for directions for use. Should not be prescribed
    without thorough knowledge of dose,
    indications and toxicity as contained in
    accompanying literature.

    CYTOTOXIC AGENT

    FOR SINGLE DOSE USE
    STERILE, NON-PYROGENIC
    FOR PARENTERAL USE

    460-634-01

    C
    627

    NDC: 10019-957-01

    Cyclophosphamide
    for Injection, USP

    2 gram/vial
    Rx only

    MUST BE DILUTED
    FOR IV INFUSIONOR
    DIRECT INJECTION USE

    1 Single Dose Vial

    Baxter Logo
    Manufactured by
    Baxter Healthcare Corporation
    Deerfield, IL 60015 USA
    Made in Germany

    LOT /EXP:

    2638B5073

    Bar Code

    NDC: 10019-957-01

    Cyclophosphamide
    for Injection, USP

    2 gram/vial
    Rx only

    MUST BE DILUTED
    FOR IV INFUSIONOR
    DIRECT INJECTION USE

    1 Single Dose Vial

    Baxter Logo
    Manufactured by
    Baxter Healthcare Corporation
    Deerfield, IL 60015 USA
    Made in Germany

    FOLDING BOX
    CAN BE RECYCLED Symbol

    CYCLOPHOSPHAMIDE 
    cyclophosphamide injection, powder, for solution
    Product Information
    Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC: 83703-540
    Route of AdministrationINTRAVENOUS, ORAL
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    CYCLOPHOSPHAMIDE (UNII: 8N3DW7272P) (4-HYDROXYCYCLOPHOSPHAMIDE - UNII:1XBF4E50HS) CYCLOPHOSPHAMIDE ANHYDROUS500 mg  in 25 mL
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC: 83703-540-011 in 1 CARTON05/21/2008
    1NDC: 83703-540-5025 mL in 1 VIAL, SINGLE-DOSE; Type 0: Not a Combination Product
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    ANDAANDA04074505/21/2008
    CYCLOPHOSPHAMIDE 
    cyclophosphamide injection, powder, for solution
    Product Information
    Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC: 83703-541
    Route of AdministrationORAL, INTRAVENOUS
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    CYCLOPHOSPHAMIDE (UNII: 8N3DW7272P) (4-HYDROXYCYCLOPHOSPHAMIDE - UNII:1XBF4E50HS) CYCLOPHOSPHAMIDE ANHYDROUS1 g  in 50 mL
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC: 83703-541-011 in 1 CARTON05/21/2008
    1NDC: 83703-541-1650 mL in 1 VIAL, SINGLE-DOSE; Type 0: Not a Combination Product
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    ANDAANDA04074505/21/2008
    CYCLOPHOSPHAMIDE 
    cyclophosphamide injection, powder, for solution
    Product Information
    Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC: 83703-542
    Route of AdministrationINTRAVENOUS, ORAL
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    CYCLOPHOSPHAMIDE (UNII: 8N3DW7272P) (4-HYDROXYCYCLOPHOSPHAMIDE - UNII:1XBF4E50HS) CYCLOPHOSPHAMIDE ANHYDROUS2 g  in 100 mL
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC: 83703-542-011 in 1 CARTON05/21/2008
    1NDC: 83703-542-11100 mL in 1 VIAL, SINGLE-DOSE; Type 0: Not a Combination Product
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    ANDAANDA04074505/21/2008
    Labeler - Bamboo US Bidco LCC (119087615)
    Registrant - Baxter Healthcare Corporation (005083209)
    Establishment
    NameAddressID/FEIBusiness Operations
    Baxter Oncology GmbH344276063analysis(83703-540, 83703-541, 83703-542) , label(83703-540, 83703-541, 83703-542) , manufacture(83703-540, 83703-541, 83703-542) , pack(83703-540, 83703-541, 83703-542) , sterilize(83703-540, 83703-541, 83703-542) , api manufacture(83703-540, 83703-541, 83703-542)

    Revised: 6/2024
     

    © 2024 FDA.report
    This site is not affiliated with or endorsed by the FDA.