CYCLOPHENE

NDC 70332-102-01

For Prescription Compounding Only

Rx only

RapidPaq™
CYCLOPHENE™
(5% cyclobenzaprine hydrochloride topical cream kit)

RapidPaq™ kits provide a convenient approach to rapidly prepare prescription medications, as all components are pre-measured. This kit is manufactured according to US FDA current Good Manufacturing Practices (cGMP).

Description:
This kit contains active and inactive materials to prepare approximately 111.2 grams of Cyclobenzaprine Hydrochloride topical cream. This kit may only be used for prescription compounding by an appropriate licensed medical professional, in response to a physician's prescription, to create a medication tailored to the specialized needs of an individual patient.

Active Ingredients:
- 5.6 g Cyclobenzaprine Hydrochloride [equivalent to 4.9 g Cyclobenzaprine]

Inactive Ingredients:
- 100 g RapidPaq Cream Base (D. l Water, Cetearyl Alcohol, Cyclomethicone, Polysorbate-60, Sorbitol, Phenoxyethanol(and)ethylhexylglycerin,
Tocopheryl Acetate, Aloe Barbadensis, Disodium EDTA)
- 5.6 Ethoxy Diglycol
- Spatula
- Instructions

Pharmacist Instructions for Preparation

1 Remove and Inspect the Contents of the Kit

Ensure that all components are present. Ensure that the safety seals are present on the Cyclobenzaprine Hydrochloride, ethoxy diglycol and RapidPaq Cream Base. If components are missing or the safety seals are not intact do not use the kit.

2 Prepare for Mixing

Wear gloves and eye protection during mixing operations. Remove the cap and seal from the RapidPaq Cream Base. Break the perforated seal and remove the cap from the Cyclobenzaprine Hydrochloride and ethoxy diglycol.

3 Dissolve the Cyclobenzaprine Hydrochloride

Using a spatula make a well in the center of the RapidPaq Cream Base. Transfer approximately half of the ethoxy diglycol to the Cyclobenzaprine Hydrochloride bottle. Cap the Cyclobenzaprine Hydrochloride bottle and shake to ensure that all residue Cyclobenzaprine Hydrochloride has been dissolved. Pour the contents into the RapidPaq Cream Base. Repeat this step with the remaining ethoxy diglycol.

4 Complete the Mixing Process

Using the spatula, mix the RapidPaq Base jar that now contains the ethoxy diglycol and cyclobenazprine hydrochloride ingredients thoroughly for about 2 minutes or until fully dissolved.

5 Relabel the Resulting Cream

Label the resulting topical cream as required for prescription products. Ensure that the original RapidPaq Cream Base label is removed or obscured, since the original label is no longer accurate once the cream is prepared.

Discard the spatula.

Store the unused kit at room temperature of 15-30°C (59-86°F). Once prepared, store the topical cream between 15-30°C (59-86°F). The final cream is stable for up to eight weeks.

U.S. Patents Pending

Repackaged and Distributed by:
California Pharmaceuticals, LLC
768 Calle Plano
Camarillo, CA 93012

California
PHARMACEUTICALS LLC

CS107-A1 rev 3

Cyclophene instructions

Cyclophene instructions

Do not use if saety seal is broken

Cyclobenzaprine Hydrochloride

1-propanamine, 3-(5H-dibenzo[a,d]cycloheptenn-5-ylidene)-N,N-dimethyl-, hydrochloride

RxOnly

CAS # 6202-23-9

Net contents 5.6 g

Repackaged by:

California Pharmaceuticals, LLC

Camarillo, CA 93012

California

PHARMACEUTICALS LLC

CS104-A1 rev 1

Cyclobenzaprine label

Do not use if seal is broken

RapidPaq™ Cream base

Net contents: 100 g

Ingredients: (D.l Water, Cetearyl Alcohol, Cyclomethicone, Polysorbate-60, Sorbitol, Phenoxyethanol(and)ethylhexylglycerin, Tocopheryl Acetate,

Aloe barbadensis, Disodium EDTA.)

RX Only

Manufactured for California Pharmaceyticals, LLC, Camarillo, CA 93012

RapidPaq Cream Base

NDC 70332-102-01

Rx only

RapidPaq™

Kit for Topical Cream

CYCLOPHENE™

(5% cyclobenzaprine hydrochloride topical cream kit)

Muscle relaxant

Store at room temperature,

15-30°C (59-86°F)

Description:

This kit contains active and inactive materials to prepare approximately 111.2 grams of Cyclobenzaprine Hydrochloride topical cream. This kit may only be used for prescription compounding by an appropriate licensed medical professional, in response to a physician's prescription, to create a medication tailored to the specialized needs of an individual patient.

Active ingredient

- 5.6 g Cyclobenzaprine Hydrochloride USP [equivalent to 4.9 g Cyclobenzaprine]

Inactive Ingredients:

   - 100 g RapidPaq Cream Base(D.l Water, Cetearyl Alcohol, Cyclomethicone, Polysorbate-60, Sorbitol, Phenoxyethanol(and) ethylhexylglycerin,

                                                Tocopheryl Acetate, Aloe Barbadensis, Disodium EDTA)

   - 5.6 g Ethoxy Diglycol

   - Spatula

   - Instructions

U.S. Patents Pending

Do not use if safety seal is broken

California

PHARMACEUTICALS LLC

Repacked and Distributed By;

Caifornis Pharmaceuticals, LLC

768 Calle Plano

Camarillo, CA 93012

CS 108-A1 rev 1

Cyclophene Kit