Ampicillin

Manufacturer
Medical Purchasing Solutions, LLC
Effective date
2023-05-23
Label type
HUMAN PRESCRIPTION DRUG LABEL
Version
6
Source
full-release
Hydrated at
2026-05-31 20:49:32

Label at a glance#

ProductAmpicillin
Active ingredientAMPICILLIN SODIUM
Label structure14 sections

Indications and uses

Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions: Respiratory Tract Infections caused by Streptococcus pneumoniae, S taphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae , and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli , Group B streptococci, ...

Dosage and administration

Infections of the respiratory tract and soft tissues. Patients weighing 40 kg (88 lbs) or more: 250 mg to 500 mg every 6 hours. Patients weighing less than 40 kg (88 lbs): 25 to 50 mg/kg/day in equally divided doses at 6- to 8-hour intervals. Infections of the gastrointestinal and genitourinary tracts (including those caused by Neisseria gonorrhoeae in females). Patients weighing 40 kg (88 lbs) or more: 500 mg eve...

Label contents#

Full prescribing information#

SPL UNCLASSIFIED SECTION

To reduce the development of drug-resistant bacteria and maintain the effectiveness of ampicillin and other antibacterial drugs, ampicillin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria.

DESCRIPTION

DESCRIPTION SECTION

Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens.

Ampicillin for Injection, USP is a white to off-white crystalline powder. The reconstituted solution is clear, colorless and free from visible particulates.

Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains sodium content as 16.46 mg (0.72 mEq) per 250 mg, 32.91 mg (1.43 mEq) per 500 mg, 65.83 mg (2.86 mEq) per 1 g or 131.66 mg (5.72 mEq) per 2 g of ampicillin.

It has the following molecular structure:
Chemical StructureChemical Structure

The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.

CLINICAL PHARMACOLOGY

CLINICAL PHARMACOLOGY SECTION

Ampicillin for Injection, USP diffuses readily into most body tissues and fluids. However, penetration into the cerebrospinal fluid and brain occurs only when the meninges are inflamed. Ampicillin is excreted largely unchanged in the urine and its excretion can be delayed by concurrent administration of probenecid. Due to maturational changes in renal function, ampicillin half-life decreases as postmenstrual age (a sum of gestational age and postnatal age) increases for infants with postnatal age of less than 28 days. The active form appears in the bile in higher concentrations than those found in serum. Ampicillin is the least serum-bound of all the penicillins, averaging about 20% compared to approximately 60 to 90% for other penicillins. Ampicillin for Injection, USP is well-tolerated by most patients and has been given in doses of 2 grams daily for many weeks without adverse reactions.

Microbiology

SPL UNCLASSIFIED SECTION

While in vitro studies have demonstrated the susceptibility of most strains of the following organisms, clinical efficacy for infections other than those included in the  INDICATIONS AND USAGE section has not been demonstrated.

Antibacterial Activity

The following bacteria have been shown in in vitro studies to be susceptible to Ampicillin for Injection, USP:

Gram-positive Bacteria

Hemolytic and nonhemolytic streptococci
Streptococcus pneumoniae
Nonpenicillinase-producing staphylococci
Clostridium spp.
B. anthracis
Listeria monocytogenes
Most strains of enterococci.

Gram-negative Bacteria

H. influenzae
N. gonorrhoeae
N. meningitidis
Proteus mirabilis
Many strains of Salmonella, Shigella, and E. coli.

AMPICILLIN does not resist destruction by penicillinase.

Susceptibility Test Methods

Diffusion Techniques

Quantitative methods that require measurement of zone diameters provide reproducible estimates of the susceptibility of bacteria to antimicrobial compounds. One such standardized procedure 1,2 that has been recommended for use with disks to test the susceptibility of microorganisms to ampicillin, uses the 10 mcg ampicillin disk. Interpretation involves correlation of the diameter obtained in the disk test with the minimum inhibitory concentration (MIC) for ampicillin.  Reports from the laboratory providing results of the standard single-disk susceptibility test with a 10 mcg ampicillin disk should be interpreted according to the criteria provided in Table 1.

Dilution Techniques

Quantitative methods that are used to determine minimum inhibitory concentrations (MICs) provide reproducible estimates of the susceptibility of bacteria to antimicrobial compounds. One such standardized procedure 1,3 uses a standardized dilution method (broth or agar) or equivalent with ampicillin powder. The MIC values obtained should be interpreted according to the criteria provided in Table 1.


TABLE 1: SUSCEPTIBILITY TEST INTERPRETIVE CRITERIA 
 
Susceptibility Test Result Interpretive Criteria
  Pathogen
Disk Diffusion
(Zone diameter in mm)
Minimal Inhibitory
Concentration
(MIC in mcg/mL)
S
I
R
S
I
R
  Enterobacteriaceae
≥17
14 to 16
≤13
≤8
16
≥32
  Enterococcus spp.
≥17
-
≤16
≤8
-
≥16
  Haemophilus influenzae and Haemophilus parainfluenzae
≥22
19 to 21
≤18
≤1
2
≥4
  Streptococcus spp.
  (beta-hemolytic group)
≥24
-
-
≤0.25
-
-
  Streptococcus spp.
  (viridans group)
- 
 -
 -
≤0.25
0.5 to 4
≥8
  Neisseria meningitidis
-
-
-
≤0.12
0.25 to 1
≥2

Non-meningitidis S. pneumoniae isolates may be considered susceptible to ampicillin if the isolate has a penicillin MIC of ≤ 0.06 mcg/mL.

Susceptibility of staphylococci to ampicillin may be deduced from testing only penicillin and either cefoxitin or oxacillin.


A report of “Susceptible” (S) indicates that the pathogen is likely to be inhibited by usually achievable concentrations of the antimicrobial compound in the blood. A report of “Intermediate” (I) indicates that the result should be considered equivocal, if the microorganism is not fully susceptible to alternative, clinically feasible drugs, the test should be repeated. This category implies possible clinical applicability in body sites where the drug is physiologically concentrated or in situations where high dosage of the drug can be used. This category also provides a buffer zone that prevents small uncontrolled technical factors from causing major discrepancies in interpretation. A report of “Resistant” (R) indicates that the pathogen is not likely to be inhibited if the antimicrobial compound in the blood reaches the concentrations usually achievable; other therapy should be selected.


Quality Control


Standardized susceptibility test procedures require the use of laboratory control microorganisms 1,2,3.


The 10 mcg ampicillin disk and the standard ampicillin powder should provide respectively the following zone diameters and MIC values in these laboratory test quality control strains:


TABLE 2: ACCEPTABLE QUALITY CONTROL RANGES 
 
Acceptable Quality Control Ranges
  Microorganism
Disk Diffusion
(Zone diameter ranges in mm)
Minimal Inhibitory
Concentration Range
(MIC in mcg/mL)
  Enterococcus faecalis
  ATCC ® 29212
 -
0.5 to 2
  Escherichia coli
  ATCC ® 25922
16 to 22
2 to 8
  Escherichia coli
  ATCC ® 35218
6
> 32
  Haemophilus influenzae
  ATCC ® 49247
13 to 21
2 to 8
  Staphylococcus aureus
  ATCC ® 25923
27 to 35
 -
  Staphylococcus aureus
  ATCC ® 29213
 -
0.5 to 2
  Streptococcus pneumoniae
  ATCC ® 49619
30 to 36
0.06 to 0.25

INDICATIONS AND USAGE

INDICATIONS & USAGE SECTION

Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:

Respiratory Tract Infections
caused by Streptococcus pneumoniae, S taphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci.

Bacterial Meningitis
caused by E. coli, Group B streptococci, and other Gram-negative bacteria ( Listeria m onocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria.

Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis.

Urinary Tract Infections
caused by sensitive strains of E. coli and Proteus mirabilis.

Gastrointestinal Infections
caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy.

Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate.

To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.

Indicated surgical procedures should be performed.

CONTRAINDICATIONS

CONTRAINDICATIONS SECTION


A history of a previous hypersensitivity reaction to any of the penicillins is a contraindication.

WARNINGS

WARNINGS SECTION

Serious and occasionally fatal hypersensitivity (anaphylactoid) reactions have been reported in patients on penicillin therapy. Although anaphylaxis is more frequent following parenteral therapy, it has occurred in patients on oral penicillins. These reactions are more apt to occur in individuals with a history of penicillin hypersensitivity and/or a history of sensitivity to multiple allergens.

There have been well-documented reports of individuals with a history of penicillin hypersensitivity reactions who have experienced severe hypersensitivity reactions when treated with a cephalosporin. Before initiating therapy with a penicillin, careful inquiry should be made concerning previous hypersensitivity reactions to penicillins, cephalosporins, and other allergens. If an allergic reaction occurs, the drug should be discontinued and appropriate therapy instituted.

SERIOUS ANAPHYLACTOID REACTIONS REQUIRE IMMEDIATE EMERGENCY TREATMENT WITH EPINEPHRINE, OXYGEN, INTRAVENOUS STEROIDS, AND AIRWAY MANAGEMENT, INCLUDING INTUBATION, SHOULD ALSO BE ADMINISTERED AS INDICATED.

Clostridium difficile
associated diarrhea (CDAD) has been reported with use of nearly all antibacterial agents, including ampicillin for injection, and may range in severity from mild diarrhea to fatal colitis. Treatment with antibacterial agents alters the normal flora of the colon leading to overgrowth of C. difficile.

C. difficile
produces toxins A and B which contribute to the development of CDAD. Hypertoxin producing strains of C. difficile cause increased morbidity and mortality, as these infections can be refractory to antimicrobial therapy and may require colectomy. CDAD must be considered in all patients who present with diarrhea following antibiotic use. Careful medical history is necessary since CDAD has been reported to occur over two months after the administration of antibacterial agents.

If CDAD is suspected or confirmed, ongoing antibiotic use not directed against C. difficile may need to be discontinued. Appropriate fluid and electrolyte management, protein supplementation, antibiotic treatment of C. difficile, and surgical evaluation should be instituted as clinically indicated.

PRECAUTIONS

PRECAUTIONS SECTION

General

GENERAL PRECAUTIONS SECTION

The possibility of superinfections with mycotic organisms or bacterial pathogens should be kept in mind during therapy. In such cases, discontinue the drug and substitute appropriate treatment.

A high percentage (43 to 100 percent) of patients with infectious mononucleosis who receive ampicillin develop a skin rash. Typically, the rash appears 7 to 10 days after the start of oral ampicillin therapy and remains for a few days to a week after the drug is discontinued. In most cases, the rash is maculopapular, pruritic, and generalized. Therefore, the administration of ampicillin is not recommended in patients with mononucleosis. It is not known whether these patients are truly allergic to ampicillin.

Prescribing ampicillin for injection in the absence of a proven or strongly suspected bacterial infection or a prophylactic indication is unlikely to provide benefit to the patient and increases the risk of the development of drug-resistant bacteria.

Information for Patients

INFORMATION FOR PATIENTS SECTION

Patients should be counseled that antibacterial drugs including ampicillin should only be used to treat bacterial infections. They do not treat viral infections (e.g., the common cold). When ampicillin is prescribed to treat a bacterial infection, patients should be told that although it is common to feel better early in the course of therapy, the medication should be taken exactly as directed. Skipping doses or not completing the full course of therapy may: (1) decrease the effectiveness of the immediate treatment, and (2) increase the likelihood that bacteria will develop resistance and will not be treatable by ampicillin or other antibacterial drugs in the future.

Diarrhea is a common problem caused by antibiotics which usually ends when the antibiotic is discontinued. Sometimes after starting treatment with antibiotics, patients can develop watery and bloody stools (with or without stomach cramps and fever) even as late as two or more months after having taken the last dose of the antibiotic. If this occurs, patients should contact their physician as soon as possible.

Laboratory Tests

LABORATORY TESTS SECTION

As with any potent drug, periodic assessment of organ system function, including renal, hepatic, and hematopoietic, should be made during prolonged therapy.

Transient elevation of serum transaminase has been observed following administration of ampicillin. The significance of this finding is not known.

Drug Interactions

DRUG INTERACTIONS SECTION

The concurrent administration of allopurinol and ampicillin increases substantially the incidence of skin rashes in patients receiving both drugs as compared to patients receiving ampicillin alone. It is not known whether this potentiation of ampicillin rashes is due to allopurinol or the hyperuricemia present in these patients.

Drug/Laboratory Test Interactions

DRUG & OR LABORATORY TEST INTERACTIONS SECTION

With high urine concentrations of ampicillin, false-positive glucose reactions may occur if Clinitest, Benedict’s Solution, or Fehling’s Solution are used. Therefore, it is recommended that glucose tests based on enzymatic glucose oxidase reactions (such as Clinistix or Tes-Tape) be used.

Carcinogenesis, Mutagenesis, and Impairment of Fertility

CARCINOGENESIS & MUTAGENESIS & IMPAIRMENT OF FERTILITY SECTION


No long-term animal studies have been conducted with this drug.

Pregnancy - Category B

PREGNANCY SECTION

Reproduction studies have been performed in laboratory animals at doses several times the human dose and have revealed no evidence of adverse effects due to ampicillin. There are, however, no adequate and well-controlled studies in pregnant women. Because animal reproduction studies are not always predictive of human response, this drug should be used during pregnancy only if clearly needed.

Labor and Delivery

LABOR & DELIVERY SECTION

Oral ampicillin-class antibiotics are poorly absorbed during labor. Studies in guinea pig showed that intravenous administration of ampicillin slightly decreased the uterine tone and frequency of contractions, but moderately increased the height and duration of contractions. However, it is not known whether use of these drugs in humans during labor or delivery has immediate or delayed adverse effects on the fetus, prolongs the duration of labor, or increases the likelihood that forceps delivery or other obstetrical intervention or resuscitation of the newborn will be necessary.

Nursing Mothers

NURSING MOTHERS SECTION

Ampicillin is excreted in trace amounts in human milk. Therefore, caution should be exercised when ampicillin-class antibiotics are administered to a nursing woman.

Pediatric Use

PEDIATRIC USE SECTION

Guidelines for the administration of these drugs to children, including neonates are presented in DOSAGE AND ADMINISTRATION section.

ADVERSE REACTIONS

ADVERSE REACTIONS SECTION

As with other penicillins, it may be expected that untoward reactions will be essentially limited to sensitivity phenomena. They are more likely to occur in individuals who have previously demonstrated hypersensitivity to penicillins and in those with a history of allergy, asthma, hay fever, or urticaria.

The following adverse reactions have been reported as associated with the use of ampicillin:

Gastrointestinal

Glossitis, stomatitis, black “hairy” tongue, nausea, vomiting, enterocolitis, pseudomembranous colitis, and diarrhea. (These reactions are usually associated with oral dosage forms.)

Hypersensitivity Reactions

Skin rashes and urticaria have been reported frequently. A few cases of exfoliative dermatitis and erythema multiforme have been reported. Anaphylaxis is the most serious reaction experienced and has usually been associated with the parenteral dosage form.

Note:

Urticaria, other skin rashes, and serum sickness-like reactions may be controlled with antihistamines and, if necessary, systemic corticosteroids. Whenever such reactions occur, ampicillin should be discontinued, unless, in the opinion of the physician, the condition being treated is life-threatening and amenable only to ampicillin therapy. Serious anaphylactic reactions require the immediate use of epinephrine, oxygen, and intravenous steroids.

Liver
– A moderate rise in serum glutamic oxaloacetic transaminase (SGOT) has been noted, particularly in infants, but the significance of this finding is unknown. Mild transitory SGOT elevations have been observed in individuals receiving larger (two to four times) than usual and oft-repeated intramuscular injections. Evidence indicates that glutamic oxaloacetic transaminase (GOT) is released at the site of intramuscular injection of ampicillin sodium and that the presence of increased amounts of this enzyme in the blood does not necessarily indicate liver involvement.

Hemic and Lymphatic Systems
– Anemia, thrombocytopenia, thrombocytopenic purpura, eosinophilia, leukopenia, and agranulocytosis have been reported during therapy with the penicillins. These reactions are usually reversible on discontinuation of therapy and are believed to be hypersensitivity phenomena.

Central Nervous System
- Seizures

OVERDOSAGE

OVERDOSAGE SECTION

In cases of overdose, discontinue medication, treat symptomatically, and institute supportive measures as required. In patients with renal function impairment, ampicillin-class antibiotics can be removed by hemodialysis but not peritoneal dialysis.

DOSAGE AND ADMINISTRATION

DOSAGE & ADMINISTRATION SECTION

Infections of the respiratory tract and soft tissues.

Patients weighing 40 kg (88 lbs) or more: 250 mg to 500 mg every 6 hours.

Patients weighing less than 40 kg (88 lbs): 25 to 50 mg/kg/day in equally divided doses at 6- to 8-hour intervals.

Infections of the gastrointestinal and genitourinary tracts (including those caused by Neisseria gonorrhoeae in females).

Patients weighing 40 kg (88 lbs) or more: 500 mg every 6 hours.

Patients weighing less than 40 kg (88 lbs): 50 mg/kg/day in equally divided doses at 6- to 8-hour intervals.

In the treatment of chronic urinary tract and intestinal infections, frequent bacteriological and clinical appraisal is necessary. Smaller doses than those recommended above should not be used. Higher doses should be used for stubborn or severe infections. In stubborn infections, therapy may be required for several weeks. It may be necessary to continue clinical and/or bacteriological follow-up for several months after cessation of therapy.

Urethritis in males due to N. gonorrhoeae.

Adults –
Two doses of 500 mg each at an interval of 8 to 12 hours. Treatment may be repeated if necessary or extended if required.

In the treatment of complications of gonorrheal urethritis, such as prostatitis and epididymitis, prolonged and intensive therapy is recommended. Cases of gonorrhea with a suspected primary lesion of syphilis should have darkfield examinations before receiving treatment. In all other cases where concomitant syphilis is suspected, monthly serological tests should be made for a minimum of four months.

The doses for the preceding infections may be given by either the intramuscular or intravenous route. A change to oral ampicillin may be made when appropriate.

Bacterial Meningitis

Adults and children -
150 to 200 mg/kg/day in equally divided doses every 3 to 4 hours. (Treatment may be initiated with intravenous drip therapy and continued with intramuscular injections.) The doses for other infections may be given by either the intravenous or intramuscular route.

Neonates (less than or equal to 28 days of postnatal age)
– Dosage should be based on Gestational age and Postnatal age according to Table 3.

TABLE 3: Dosage in Neonates (less than or equal to 28 days of postnatal age) for Bacterial Meningitis and Septicemia  
  Gestational age
  (weeks)

  Postnatal age
  (days)
  Dosage
  less than or equal to 34
  less than or equal to 7
  100 mg/kg/day in equally divided doses every 12 hours
  less than or equal to 34
  greater than or equal to 8 and less than 28
  150 mg/kg/day in equally divided doses every 12 hours
  greater than 34
  less than or equal to 28
  150 mg/kg/day in equally divided doses every 8 hours

Septicemia

Adults and children -
150 to 200 mg/kg/day. Start with intravenous administration for at least three days and continue with the intramuscular route every 3 to 4 hours.

Neonates (less than or equal to 28 days of postnatal age)
– Dosage should be based on Gestational age and Postnatal age according to Table 3 (above).

Treatment of all infections should be continued for a minimum of 48 to 72 hours beyond the time that the patient becomes asymptomatic or evidence of bacterial eradication has been obtained. A minimum of 10 days treatment is recommended for any infection caused by Group A beta-hemolytic streptococci to help prevent the occurrence of acute rheumatic fever or acute glomerulonephritis.

DIRECTIONS FOR USE

SPL UNCLASSIFIED SECTION

Use only freshly prepared solutions. Intramuscular and intravenous injections should be administered within one hour after preparation since the potency may decrease significantly after this period.

Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit.

For Intramuscular Use
– Dissolve contents of a vial with the amount of Sterile Water for Injection, USP, or Bacteriostatic Water for Injection, USP, listed in the table below:

  NDC
Label
Claim

Recommended
Amount of
Diluent

Withdrawable
Volume

Concentration
(in mg/mL)

  55150-111-10
250 mg
1 mL
1 mL
250 mg
  55150-112-10
500 mg
1.8 mL
2 mL
250 mg
  55150-113-10
1 gram
3.5 mL
4 mL
250 mg
  55150-114-20
2 grams
6.8 mL
8 mL
250 mg

While Ampicillin for Injection, USP, 1 g and 2 g, are primarily for intravenous use, they may be administered intramuscularly when the 250 mg or 500 mg vials are unavailable. In such instances, dissolve in 3.5 or 6.8 mL Sterile Water for Injection, USP, or Bacteriostatic Water for Injection, USP, respectively. The resulting solution will provide a concentration of 250 mg per mL.

Bacteriostatic Water for Injection, USP is not to be used as a diluent when the product will be used in newborns.

For Direct Intravenous Use
– Add 5 mL Sterile Water for Injection, USP, or Bacteriostatic Water for Injection, USP to the 250 mg, and 500 mg vials and administer slowly over a 3- to 5-minute period. Ampicillin for Injection, USP, 1 g or 2 g may also be given by direct intravenous administration. Dissolve in 7.4 or 14.8 mL Sterile Water for Injection, USP, or Bacteriostatic Water for Injection, USP, respectively, and administer slowly over at least 10 to 15 minutes. CAUTION: More rapid administration may result in convulsive seizures.

For Administration by Intravenous Drip
– Reconstitute as directed above (For D irect Intravenous Use ) prior to diluting with Intravenous Solution. Stability studies on ampicillin sodium at several concentrations in various intravenous solutions indicate the drug will lose less than 10% activity at the temperatures noted for the time periods stated.

  Room Temperature (25°C)
  Diluent
Concentrations
Stability Periods
  Sterile Water for Injection, USP
up to 30 mg/mL
8 hours
  0.9% Sodium Chloride Injection, USP
up to 30 mg/mL
8 hours
  5% Dextrose Injection, USP
10 to 20 mg/mL
1 hour
  5% Dextrose Injection, USP
up to 2 mg/mL
2 hours
  5% Dextrose and 0.45% Sodium Chloride Injection, USP
up to 2 mg/mL
2 hours
  Lactated Ringer’s Injection, USP
up to 30 mg/mL
8 hours
  Refrigerated (4°C)
  Diluent
Concentrations
Stability Periods
  Sterile Water for Injection, USP
30 mg/mL
48 hours
  Sterile Water for Injection, USP
up to 20 mg/mL
72 hours
  0.9% Sodium Chloride Injection, USP
30 mg/mL
24 hours
  0.9% Sodium Chloride Injection, USP
up to 20 mg/mL
48 hours
  Lactated Ringer's Injection, USP
up to 30 mg/mL
24 hours
  5% Dextrose Injection, USP
up to 20 mg/mL
1 hour
  5% Dextrose and 0.45% Sodium Chloride Injection, USP
up to 10 mg/mL
1 hour

Only those solutions listed above should be used for the intravenous infusion of Ampicillin for Injection, USP. The concentrations should fall within the range specified. The drug concentration and the rate and volume of the infusion should be adjusted so that the total dose of ampicillin is administered before the drug loses its stability in the solution in use.

HOW SUPPLIED

HOW SUPPLIED SECTION

Ampicillin for Injection, USP is a white to off-white crystalline powder supplied in vials containing ampicillin sodium equivalent to 250 mg, 500 mg, 1 g or 2 g of ampicillin.

The following packages are available:


  NDC   
  Vial    
  Package Factor
  55150-111-10
  Ampicillin for Injection USP, 250 mg in 10 mL vial
  Box of 10 vials
  55150-112-10
  Ampicillin for Injection USP, 500 mg in 10 mL vial
  Box of 10 vials
  55150-113-10
  Ampicillin for Injection USP, 1 g in 15 mL vial
  Box of 10 vials
  55150-114-20
  Ampicillin for Injection USP, 2 g in 24 mL vial
  Box of 10 vials

Store the dry powder at 20° to 25°C (68° to 77°F); excursions permitted to 15° to 30°C (59° to 86°F) [see USP Controlled Room Temperature].

The vial stopper is not made with natural rubber latex.

REFERENCES

REFERENCES SECTION

  1. Clinical and Laboratory Standards Institute (CLSI). Performance Standards for Antimicrobial Susceptibility Testing; Twenty-fifth Informational Supplement. CLSI document M100-S25. Clinical and Laboratory Standards Institute, 950 West Valley Road, Suite 2500, Wayne, Pennsylvania 19087, USA, 2015.
  2. Clinical and Laboratory Standards Institute (CLSI). Performance Standards for Antimicrobial Disk Diffusion Susceptibility Tests; Approved Standard–Twelfth Edition. CLSI document M02-A12, Clinical and Laboratory Standards Institute, 950 West Valley Road, Suite 2500, Wayne, Pennsylvania 19087, USA, 2015.
  3. Clinical and Laboratory Standards Institute (CLSI). Methods for Dilution Antimicrobial Susceptibility Tests for Bacteria that Grow Aerobically; Approved Standard-Tenth Edition. CLSI document M07-A10, Clinical and Laboratory Standards Institute, 950 West Valley Road, Suite 2500, Wayne, Pennsylvania 19087, USA, 2015.

Clinitest is a registered trademark of Miles, Inc.
Clinistix is a registered trademark of Bayer Corporation.
Tes-Tape is a registered trademark of Eli Lilly Company.

Distributed by:
AuroMedics Pharma LLC
279 Princeton-Hightstown Rd.
E. Windsor, NJ 08520

Manufactured by:
Aurobindo Pharma Limited
Hyderabad - 500038
India

Revised: October 2017

PACKAGE LABEL-PRINCIPAL DISPLAY PANEL - 1 g Container Label

PACKAGE LABEL.PRINCIPAL DISPLAY PANEL


Ampicillin

for Injection, USP

1 g* per vial

For Intramuscular or

Intravenous use

Rx only

ampi1vialampi1vial

PACKAGE LABEL-PRINCIPAL DISPLAY PANEL - 1 g Outer Package Label

PACKAGE LABEL.PRINCIPAL DISPLAY PANEL

NDC 71872-7086-1

Rx Only

Ampicillin for Injection, USP

1 g* per vial

1 x 1g vial

ampilabelampilabel

DailyMed RxNorm Mappings#

RxCUI, RxNorm string, TTY table
RxCUIRxNorm stringTTYSPL version
1721475ampicillin 1 GM InjectionPSN6
1721475ampicillin 1000 MG InjectionSCD6
1721475ampicillin (as ampicillin sodium) 1 GM InjectionSY6
1721475ampicillin 1 GM InjectionSY6

DailyMed Pharmacologic Classes#

Class, Version, Type table
ClassVersionTypeEffective
AMPICILLIN Pharmacologic Class Indexing2Indexing - Pharmacologic Class20180813

DailyMed Product Concepts#

Product concept, Relation, Version table
Product conceptRelationVersionEffective
fd9d6ee0-43ae-43c7-aa52-3d5a936186d6Product name120250722
4fe9b92f-7dcd-4058-8def-e75f4dcd5ab3Product name220160201
c9385d77-2af7-47a4-bc97-1127e71caf9bProduct name320160201
05b6b9ae-4ba4-27ee-4c8c-f72b41de3815Product name520151207
b353113e-7b3d-4b1f-a286-b96a3a5eac85Product name320151026
8c59be9b-72b0-49e8-b7ef-1a80c10599deProduct name320150316

DailyMed Package Descriptions#

Package NDC, Product, Description table
Package NDCProductDescriptionFormQuantityStrengthSPL version
71872-7086-1Ampicillin1 in 1 VIALINJECTION, POWDER, FOR SOLUTION16
71872-7086-1Ampicillin1 in 1 BAGINJECTION, POWDER, FOR SOLUTION16

DailyMed Dashboard NDC Coverage#

NDC, Dashboard title, SPL version table
NDCDashboard titleSPL versionValidationDashboard ZIP
71872-7086AMPICILLIN (AMPICILLIN SODIUM) INJECTION, POWDER, FOR SOLUTION [MEDICAL PURCHASING SOLUTIONS, LLC]6Current NDC, Legacy NDC, 2 package rows20230524_690f1986-6da9-4787-e053-2a91aa0a2644.zip

DailyMed Billing Units#

Package NDC, Billing unit, Product NDC table
Package NDCBilling unitProduct NDCDailyMed indexing SPLSPL versionEffective
55150-113-10EA - Each55150-113a4924925-845d-47e5-ac26-7fe80406a91712012-07-24

Products#

Every source-derived product name is available through these pages.

DailyMed product names page 1 of 1 · 2 matching rows.

NDC Codes#

Product NDC, Package NDC table
Product NDCPackage NDC
71872-708671872-7086-1
55150-113

Ingredients#

Every source-derived ingredient row is available through these pages.

DailyMed ingredient rows page 1 of 1 · 1 matching rows.

Name, UNII, Kind table
NameUNIIKind
AMPICILLIN SODIUMJFN36L5S8KACTIM

Source Document#

Source XML

Orange Book application contexts#

All distinct exact application/product contexts derived from this label’s complete NDC list are paginated below.

Orange Book application contexts page 1 of 1 · 1 matching rows.

Source provenance: Browse the complete Orange Book source catalog · source snapshot 43.

Orange Book products#

Current product rows page 1 of 1 · 5 matching rows.

Application-product, Trade name, Ingredient table
Application-productTrade nameIngredientStrengthDosage form / routeTE codesRLD / RSApproval date
A065499-001AMPICILLIN SODIUMAMPICILLIN SODIUMEQ 125MG BASE/VIALINJECTABLE / INJECTION2010-08-17
A065499-002AMPICILLIN SODIUMAMPICILLIN SODIUMEQ 250MG BASE/VIALINJECTABLE / INJECTIONAP2010-08-17
A065499-003AMPICILLIN SODIUMAMPICILLIN SODIUMEQ 500MG BASE/VIALINJECTABLE / INJECTIONAP2010-08-17
A065499-004AMPICILLIN SODIUMAMPICILLIN SODIUMEQ 1GM BASE/VIALINJECTABLE / INJECTIONAP2010-08-17
A065499-005AMPICILLIN SODIUMAMPICILLIN SODIUMEQ 2GM BASE/VIALINJECTABLE / INJECTIONAP2010-08-17

Therapeutic equivalence codes#

Current TE-code rows page 1 of 1 · 4 matching rows.

Application-product, TE code table
Application-productTE code
A065499-002AP
A065499-003AP
A065499-004AP
A065499-005AP

Observed Orange Book product history#

Observed FDA ZIP history: Each table is queried independently by exact application/product key from successfully parsed Orange Book snapshots. Capture times identify archived source observations; absence or a change between snapshots is not inferred. FDA publication files that were not recoverable as structured ZIP data are not represented as states.

Product history page 1 of 6 · 215 observed states.

Captured, Edition, Application-product table
CapturedEditionApplication-productTrade nameStrengthDosage form / routeProduct TE source textRLD / RSApproval dateSource SHA-256
2026-09-14 22:38:342026-08A065499-001AMPICILLIN SODIUMEQ 125MG BASE/VIALINJECTABLE / INJECTION2010-08-1784e616aacf4f…
2026-09-14 22:38:342026-08A065499-002AMPICILLIN SODIUMEQ 250MG BASE/VIALINJECTABLE / INJECTIONAP2010-08-1784e616aacf4f…
2026-09-14 22:38:342026-08A065499-003AMPICILLIN SODIUMEQ 500MG BASE/VIALINJECTABLE / INJECTIONAP2010-08-1784e616aacf4f…
2026-09-14 22:38:342026-08A065499-004AMPICILLIN SODIUMEQ 1GM BASE/VIALINJECTABLE / INJECTIONAP2010-08-1784e616aacf4f…
2026-09-14 22:38:342026-08A065499-005AMPICILLIN SODIUMEQ 2GM BASE/VIALINJECTABLE / INJECTIONAP2010-08-1784e616aacf4f…
2026-08-18 06:07:402026-07A065499-001AMPICILLIN SODIUMEQ 125MG BASE/VIALINJECTABLE / INJECTION2010-08-17caaa826d4ba7…
2026-08-18 06:07:402026-07A065499-002AMPICILLIN SODIUMEQ 250MG BASE/VIALINJECTABLE / INJECTIONAP2010-08-17caaa826d4ba7…
2026-08-18 06:07:402026-07A065499-003AMPICILLIN SODIUMEQ 500MG BASE/VIALINJECTABLE / INJECTIONAP2010-08-17caaa826d4ba7…
2026-08-18 06:07:402026-07A065499-004AMPICILLIN SODIUMEQ 1GM BASE/VIALINJECTABLE / INJECTIONAP2010-08-17caaa826d4ba7…
2026-08-18 06:07:402026-07A065499-005AMPICILLIN SODIUMEQ 2GM BASE/VIALINJECTABLE / INJECTIONAP2010-08-17caaa826d4ba7…
2026-02-19 14:30 UTC2026-02A065499-001AMPICILLIN SODIUMEQ 125MG BASE/VIALINJECTABLE / INJECTION2010-08-17011fe1cb6892…
2026-02-19 14:30 UTC2026-02A065499-002AMPICILLIN SODIUMEQ 250MG BASE/VIALINJECTABLE / INJECTIONAP2010-08-17011fe1cb6892…
2026-02-19 14:30 UTC2026-02A065499-003AMPICILLIN SODIUMEQ 500MG BASE/VIALINJECTABLE / INJECTIONAP2010-08-17011fe1cb6892…
2026-02-19 14:30 UTC2026-02A065499-004AMPICILLIN SODIUMEQ 1GM BASE/VIALINJECTABLE / INJECTIONAP2010-08-17011fe1cb6892…
2026-02-19 14:30 UTC2026-02A065499-005AMPICILLIN SODIUMEQ 2GM BASE/VIALINJECTABLE / INJECTIONAP2010-08-17011fe1cb6892…
2025-12-14 10:44 UTC · 2 captures of this ZIP2025-12A065499-001AMPICILLIN SODIUMEQ 125MG BASE/VIALINJECTABLE / INJECTION2010-08-1731067a03dcf5…
2025-12-14 10:44 UTC · 2 captures of this ZIP2025-12A065499-002AMPICILLIN SODIUMEQ 250MG BASE/VIALINJECTABLE / INJECTIONAP2010-08-1731067a03dcf5…
2025-12-14 10:44 UTC · 2 captures of this ZIP2025-12A065499-003AMPICILLIN SODIUMEQ 500MG BASE/VIALINJECTABLE / INJECTIONAP2010-08-1731067a03dcf5…
2025-12-14 10:44 UTC · 2 captures of this ZIP2025-12A065499-004AMPICILLIN SODIUMEQ 1GM BASE/VIALINJECTABLE / INJECTIONAP2010-08-1731067a03dcf5…
2025-12-14 10:44 UTC · 2 captures of this ZIP2025-12A065499-005AMPICILLIN SODIUMEQ 2GM BASE/VIALINJECTABLE / INJECTIONAP2010-08-1731067a03dcf5…
2025-08-23 18:47 UTC2025-08A065499-001AMPICILLIN SODIUMEQ 125MG BASE/VIALINJECTABLE / INJECTION2010-08-176a471c1ec25d…
2025-08-23 18:47 UTC2025-08A065499-002AMPICILLIN SODIUMEQ 250MG BASE/VIALINJECTABLE / INJECTIONAP2010-08-176a471c1ec25d…
2025-08-23 18:47 UTC2025-08A065499-003AMPICILLIN SODIUMEQ 500MG BASE/VIALINJECTABLE / INJECTIONAP2010-08-176a471c1ec25d…
2025-08-23 18:47 UTC2025-08A065499-004AMPICILLIN SODIUMEQ 1GM BASE/VIALINJECTABLE / INJECTIONAP2010-08-176a471c1ec25d…
2025-08-23 18:47 UTC2025-08A065499-005AMPICILLIN SODIUMEQ 2GM BASE/VIALINJECTABLE / INJECTIONAP2010-08-176a471c1ec25d…
2025-03-22 03:13 UTC · 3 captures of this ZIP2025-03A065499-001AMPICILLIN SODIUMEQ 125MG BASE/VIALINJECTABLE / INJECTION2010-08-17fd3edfee7708…
2025-03-22 03:13 UTC · 3 captures of this ZIP2025-03A065499-002AMPICILLIN SODIUMEQ 250MG BASE/VIALINJECTABLE / INJECTIONAP2010-08-17fd3edfee7708…
2025-03-22 03:13 UTC · 3 captures of this ZIP2025-03A065499-003AMPICILLIN SODIUMEQ 500MG BASE/VIALINJECTABLE / INJECTIONAP2010-08-17fd3edfee7708…
2025-03-22 03:13 UTC · 3 captures of this ZIP2025-03A065499-004AMPICILLIN SODIUMEQ 1GM BASE/VIALINJECTABLE / INJECTIONAP2010-08-17fd3edfee7708…
2025-03-22 03:13 UTC · 3 captures of this ZIP2025-03A065499-005AMPICILLIN SODIUMEQ 2GM BASE/VIALINJECTABLE / INJECTIONAP2010-08-17fd3edfee7708…
2025-02-26 10:13 UTC · 3 captures of this ZIP2025-02A065499-001AMPICILLIN SODIUMEQ 125MG BASE/VIALINJECTABLE / INJECTION2010-08-17b8a1b40f171c…
2025-02-26 10:13 UTC · 3 captures of this ZIP2025-02A065499-002AMPICILLIN SODIUMEQ 250MG BASE/VIALINJECTABLE / INJECTIONAP2010-08-17b8a1b40f171c…
2025-02-26 10:13 UTC · 3 captures of this ZIP2025-02A065499-003AMPICILLIN SODIUMEQ 500MG BASE/VIALINJECTABLE / INJECTIONAP2010-08-17b8a1b40f171c…
2025-02-26 10:13 UTC · 3 captures of this ZIP2025-02A065499-004AMPICILLIN SODIUMEQ 1GM BASE/VIALINJECTABLE / INJECTIONAP2010-08-17b8a1b40f171c…
2025-02-26 10:13 UTC · 3 captures of this ZIP2025-02A065499-005AMPICILLIN SODIUMEQ 2GM BASE/VIALINJECTABLE / INJECTIONAP2010-08-17b8a1b40f171c…
2025-01-19 17:59 UTC · 7 captures of this ZIP2025-01A065499-001AMPICILLIN SODIUMEQ 125MG BASE/VIALINJECTABLE / INJECTION2010-08-1703ed91905a0d…
2025-01-19 17:59 UTC · 7 captures of this ZIP2025-01A065499-002AMPICILLIN SODIUMEQ 250MG BASE/VIALINJECTABLE / INJECTIONAP2010-08-1703ed91905a0d…
2025-01-19 17:59 UTC · 7 captures of this ZIP2025-01A065499-003AMPICILLIN SODIUMEQ 500MG BASE/VIALINJECTABLE / INJECTIONAP2010-08-1703ed91905a0d…
2025-01-19 17:59 UTC · 7 captures of this ZIP2025-01A065499-004AMPICILLIN SODIUMEQ 1GM BASE/VIALINJECTABLE / INJECTIONAP2010-08-1703ed91905a0d…
2025-01-19 17:59 UTC · 7 captures of this ZIP2025-01A065499-005AMPICILLIN SODIUMEQ 2GM BASE/VIALINJECTABLE / INJECTIONAP2010-08-1703ed91905a0d…

Observed Orange Book normalized TE history#

Normalized TE history page 1 of 5 · 172 observed states.

Captured, Edition, Application-product table
CapturedEditionApplication-productTE codeOrderSource SHA-256
2026-09-14 22:38:342026-08A065499-002AP184e616aacf4f…
2026-09-14 22:38:342026-08A065499-003AP184e616aacf4f…
2026-09-14 22:38:342026-08A065499-004AP184e616aacf4f…
2026-09-14 22:38:342026-08A065499-005AP184e616aacf4f…
2026-08-18 06:07:402026-07A065499-002AP1caaa826d4ba7…
2026-08-18 06:07:402026-07A065499-003AP1caaa826d4ba7…
2026-08-18 06:07:402026-07A065499-004AP1caaa826d4ba7…
2026-08-18 06:07:402026-07A065499-005AP1caaa826d4ba7…
2026-02-19 14:30 UTC2026-02A065499-002AP1011fe1cb6892…
2026-02-19 14:30 UTC2026-02A065499-003AP1011fe1cb6892…
2026-02-19 14:30 UTC2026-02A065499-004AP1011fe1cb6892…
2026-02-19 14:30 UTC2026-02A065499-005AP1011fe1cb6892…
2025-12-14 10:44 UTC · 2 captures of this ZIP2025-12A065499-002AP131067a03dcf5…
2025-12-14 10:44 UTC · 2 captures of this ZIP2025-12A065499-003AP131067a03dcf5…
2025-12-14 10:44 UTC · 2 captures of this ZIP2025-12A065499-004AP131067a03dcf5…
2025-12-14 10:44 UTC · 2 captures of this ZIP2025-12A065499-005AP131067a03dcf5…
2025-08-23 18:47 UTC2025-08A065499-002AP16a471c1ec25d…
2025-08-23 18:47 UTC2025-08A065499-003AP16a471c1ec25d…
2025-08-23 18:47 UTC2025-08A065499-004AP16a471c1ec25d…
2025-08-23 18:47 UTC2025-08A065499-005AP16a471c1ec25d…
2025-03-22 03:13 UTC · 3 captures of this ZIP2025-03A065499-002AP1fd3edfee7708…
2025-03-22 03:13 UTC · 3 captures of this ZIP2025-03A065499-003AP1fd3edfee7708…
2025-03-22 03:13 UTC · 3 captures of this ZIP2025-03A065499-004AP1fd3edfee7708…
2025-03-22 03:13 UTC · 3 captures of this ZIP2025-03A065499-005AP1fd3edfee7708…
2025-02-26 10:13 UTC · 3 captures of this ZIP2025-02A065499-002AP1b8a1b40f171c…
2025-02-26 10:13 UTC · 3 captures of this ZIP2025-02A065499-003AP1b8a1b40f171c…
2025-02-26 10:13 UTC · 3 captures of this ZIP2025-02A065499-004AP1b8a1b40f171c…
2025-02-26 10:13 UTC · 3 captures of this ZIP2025-02A065499-005AP1b8a1b40f171c…
2025-01-19 17:59 UTC · 7 captures of this ZIP2025-01A065499-002AP103ed91905a0d…
2025-01-19 17:59 UTC · 7 captures of this ZIP2025-01A065499-003AP103ed91905a0d…
2025-01-19 17:59 UTC · 7 captures of this ZIP2025-01A065499-004AP103ed91905a0d…
2025-01-19 17:59 UTC · 7 captures of this ZIP2025-01A065499-005AP103ed91905a0d…
2024-12-13 21:23 UTC · 2 captures of this ZIP2024-12A065499-002AP12680178bc6a6…
2024-12-13 21:23 UTC · 2 captures of this ZIP2024-12A065499-003AP12680178bc6a6…
2024-12-13 21:23 UTC · 2 captures of this ZIP2024-12A065499-004AP12680178bc6a6…
2024-12-13 21:23 UTC · 2 captures of this ZIP2024-12A065499-005AP12680178bc6a6…
2024-09-14 05:58 UTC · 2 captures of this ZIP2024-09A065499-002AP15bbf6a4d5a75…
2024-09-14 05:58 UTC · 2 captures of this ZIP2024-09A065499-003AP15bbf6a4d5a75…
2024-09-14 05:58 UTC · 2 captures of this ZIP2024-09A065499-004AP15bbf6a4d5a75…
2024-09-14 05:58 UTC · 2 captures of this ZIP2024-09A065499-005AP15bbf6a4d5a75…

openFDA label cross-check#

OpenFDA label data provides additional search and identifier links. DailyMed’s Structured Product Label is the canonical label on FDA.report. Matching records are deduplicated before they are shown below.

Matched openFDA labels page 1 of 1 · 2 matching rows.

Brand, Generic, Manufacturer table
BrandGenericManufacturerSPL set IDEffective dateAvailable safety fieldsJoin
AmpicillinAMPICILLIN SODIUMEugia US LLCb7bf2897-8272-4c7d-84e9-6fbba0ea63fa2025-08-14Warnings, Adverse reactionsExact identifier
ndc (product): 55150-113
AmpicillinAMPICILLIN SODIUMMedical Purchasing Solutions, LLC690f1986-6da9-4787-e053-2a91aa0a26442023-05-23Warnings, Adverse reactionsExact identifier
ndc (package): 71872-7086-1
ndc (product): 71872-7086
ndc11 (package): 71872708601
spl id: fc600b6f-0ddf-10ff-e053-6394a90a6ba5
spl set id: 690f1986-6da9-4787-e053-2a91aa0a2644

Reported adverse events (FAERS/openFDA)#

Adverse event summaries are temporarily unavailable. Other product information remains available.