2.2 Dosage in Adult Patients With Indications Other Than Nosocomial Pneumonia
The usual total daily dosage of piperacillin and tazobactam for injection for adult patients with indications other than nosocomial pneumonia is 3.375 g every six hours [totaling 13.5 g (12 g piperacillin/1.5 g tazobactam)], to be administered by intravenous infusion over 30 minutes. The usual duration of piperacillin and tazobactam for injection treatment is from 7 to 10 days.
2.3 Dosage in Adult Patients With Nosocomial Pneumonia
Initial presumptive treatment of adult patients with nosocomial pneumonia should start with piperacillin and tazobactam for injection at a dosage of 4.5 g every six hours plus an aminoglycoside, [totaling 18 g (16 g piperacillin/2 g tazobactam)], administered by intravenous infusion over 30 minutes. The recommended duration of piperacillin and tazobactam for injection treatment for nosocomial pneumonia is 7 to 14 days. Treatment with the aminoglycoside should be continued in patients from whom P. aeruginosa is isolated.
2.4 Dosage in Adult Patients With Renal Impairment
In adult patients with renal impairment (creatinine clearance ≤ 40 mL/min) and dialysis patients (hemodialysis and CAPD), the
intravenous dose of piperacillin and tazobactam for injection should be reduced based on the degree of renal impairment. The
recommended daily dosage of piperacillin and tazobactam for injection for patients with renal impairment administered by intravenous infusion over 30 minutes is described in Table 1.
Table 1: Recommended Dosage of Piperacillin and Tazobactam for Injection in Patients with Normal Renal Function and Renal Impairment (As total grams piperacillin/tazobactam)
#
| Creatinine clearance, mL/min | All Indications (except nosocomial pneumonia) | Nosocomial Pneumonia |
| Greater than 40 mL/min | 3.375 every 6 hours | 4.5 every 6 hours |
| 20-40 mL/min* | 2.25 every 6 hours | 3.375 every 6 hours |
| Less than 20 mL/min* | 2.25 every 8 hours | 2.25 every 6 hours |
| Hemodialysis** | 2.25 every 12 hours | 2.25 every 8 hours |
| CAPD | 2.25 every 12 hours | 2.25 every 8 hours |
# Administer piperacillin and tazobactam for injection by intravenous infusion over 30 minutes.
* Creatinine clearance for patients not receiving hemodialysis
** 0.75 g (0.67 g piperacillin/0.08 g tazobactam) should be administered following each hemodialysis session on hemodialysis days
For patients on hemodialysis, the maximum dose is 2.25 g every twelve hours for all indications other than nosocomial pneumonia and 2.25 g every eight hours for nosocomial pneumonia. Since hemodialysis removes 30% to 40% of the administered dose, an additional dose of 0.75 g piperacillin and tazobactam for injection (0.67 g piperacillin/0.08 g tazobactam) should be administered following each dialysis period on hemodialysis days. No additional dosage of piperacillin and tazobactam for injection is necessary for CAPD patients.
2.5 Dosage in Pediatric Patients With Appendicitis/Peritonitis or Nosocomial Pneumonia
The recommended dosage for pediatric patients with appendicitis and/or peritonitis or nosocomial pneumonia aged 2 months of age and older, weighing up to 40 kg, and with normal renal function, is described in Table 2 [
see Use in Specific Populations (
8.4) and Clinical Pharmacology (
12.3)
].
Table 2: Recommended Dosage of Piperacillin and Tazobactam for Injection in Pediatric Patients 2 Months of Age and Older, Weighing Up to 40 kg, and With Normal Renal Function# |
Age | Appendicitis and/or Peritonitis | Nosocomial Pneumonia |
2 months to 9 months | 90 mg/kg (80 mg piperacillin/10 mg tazobactam) every
8 (eight) hours
| 90 mg/kg (80 mg piperacillin/10 mg tazobactam)
every 6 (six) hours
|
Older than 9 months of age | 112.5 mg/kg (100 mg piperacillin/12.5 mg tazobactam)
every 8 (eight) hours
| 112.5 mg/kg (100 mg piperacillin/12.5 mg tazobactam)
every 6 (six) hours
|
# Administer piperacillin and tazobactam for injection by intravenous infusion over 30 minutes
Pediatric patients weighing over 40 kg and with normal renal function should receive the adult dose [see
Dosage and Administration (2.2, 2.3)]. Dosage of piperacillin and tazobactam for injection in pediatric patients with renal impairment has not been determined.
2.6 Reconstitution and Dilution of Piperacillin and Tazobactam for Injection
Reconstitution of Piperacillin and Tazobactam for Injection forAdult Patients and Pediatric Patients Weighing over 40 kg
Single-Dose Vials
Reconstitute piperacillin and tazobactam for injection vials with a compatible reconstitution diluent from the list provided below.
2.25 gram, 3.375 gram, and 4.5 gram piperacillin and tazobactam for injection should be reconstituted with 10 mL, 15 mL, and 20 mL, respectively. Swirl until dissolved. After reconstitution, the single-dose vials will have a concentration of 202.5 mg per mL (180 mg per mL of piperacillin and 22.5 mg per mL of tazobactam).
Compatible Reconstitution Diluents for Single-Dose Vials
0.9% sodium chloride for injection
Sterile water for injection
Dextrose 5%
Bacteriostatic saline/parabens
Bacteriostatic water/parabens
Bacteriostatic saline/benzyl alcohol
Bacteriostatic water/benzyl alcohol
Dilution of the Reconstituted Piperacillin and Tazobactam Solution for Adult Patients and Pediatric Patients Weighing over 40 kg
Reconstituted piperacillin and tazobactam for injection solution for single-dose vials should be further diluted (recommended volume per dose of 50 mL to 150 mL) in a compatible intravenous solution listed below. Administer by infusion over a period of at least 30 minutes. During the infusion it is desirable to discontinue the primary infusion solution.
Compatible Intravenous Solutions for Single-Dose Vials
0.9% sodium chloride for injection
Sterile water for injection (Maximum recommended volume per dose of sterile water for injection is 50 mL).
Dextran 6% in saline
Dextrose 5%
LACTATED RINGER’S SOLUTION IS NOT COMPATIBLE WITH THIS PIPERACILLIN AND TAZOBACTAM FOR INJECTION USP
Piperacillin and tazobactam for injection should not be mixed with other drugs in a syringe or infusion bottle since compatibility has not been established.
Piperacillin and tazobactam for injection is not chemically stable in solutions that contain only sodium bicarbonate and solutions that significantly alter the pH.
Piperacillin and tazobactam for injection should not be added to blood products or albumin hydrolysates. Parenteral drug products should be inspected visually for particulate matter or discoloration prior to administration, whenever solution and container permit.
Dilution of the Reconstituted Piperacillin and Tazobactam Solution for Pediatric Patients Weighing up to 40 kg
The volume of reconstituted solution required to deliver the dose of piperacillin and tazobactam for injection is dependent on the weight of the child
[see Dosage and Administration (
2.5)]
. Reconstituted piperacillin and tazobactam solutions for single-dose vials should be further diluted in a compatible intravenous solution listed above.
1. Calculate patient dose as described in Table 2 above
[see Dosage and Administration (
2.5)]
.
2. Reconstitute vial with a compatible reconstitution diluent, as listed above under the subheading “Compatible Reconstitution Diluents for Single-Dose Vials,” using the appropriate volume of diluent, as listed in table 3 below. Following the addition of the diluent, swirl the single-dose vial until the powder is completely dissolved.
Table 3: Reconstitution of Single-Dose Vials and Resulting Concentration |
Strength per Single-Dose Vial | Volume of Diluent to be Added to the Vial | Concentration of the Reconstituted Product |
2.25 g (2 g piperacillin /0.25 g tazobactam) | 10 mL | 202.5 mg/mL (180 mg/mL piperacillin/ 22.5 mg/mL tazobactam) |
3.375 g (3 g piperacillin /0.375 g tazobactam) | 15 mL |
4.5 g (4 g piperacillin /0.5 g tazobactam) | 20 mL |
3. Calculate the required volume (mL) of reconstituted piperacillin and tazobactam solution based on the required dose.
4. Aseptically withdraw the required volume of reconstituted piperacillin and tazobactam solution from the single-dose vial. It should be further diluted to a final piperacillin concentration of between 20 mg/mL to 80 mg/mL (tazobactam between 2.5 mg/mL to 10 mg/mL) in a compatible intravenous solution (as listed above) in an appropriately sized syringe or IV bag.
5. Administer the diluted piperacillin and tazobactam solution by infusion over a period of at least 30 minutes (a programmable syringe or infusion pump is recommended). During the infusion it is desirable to discontinue the primary infusion solution.
Stability of Piperacillin and Tazobactam for Injection Following Reconstitution and Dilution
Piperacillin and tazobactam for injection reconstituted from single-dose vials is stable in glass and plastic containers (plastic syringes, I.V. bags and tubing) when used with compatible diluents. The single-dose vials should
NOT be frozen after reconstitution.
Single-dose vials should be used immediately after reconstitution. Discard any unused portion after storage for 24 hours at room temperature (20°C to 25°C [68°F to 77°F]), or after storage for 48 hours at refrigerated temperature (2°C to 8°C [36°F to 46°F]).
Stability studies in the IV bags have demonstrated chemical stability (potency, pH of reconstituted solution and clarity of solution) for up to 24 hours at room temperature and up to one week at refrigerated temperature. Piperacillin and tazobactam for injection contains no preservatives. Appropriate consideration of aseptic technique should be used.
Piperacillin and tazobactam for injection reconstituted from single-dose vials can be used in ambulatory intravenous infusion pumps. Stability of piperacillin and tazobactam for injection in an ambulatory intravenous infusion pump has been demonstrated for a period of 12 hours at room temperature. Each dose was reconstituted and diluted to a volume of 37.5 mL or 25 mL. One-day supply of dosing solution were aseptically transferred into the medication reservoir (IV bags or cartridge). The reservoir was fitted to a preprogrammed ambulatory intravenous infusion pump per the manufacturer's instructions. Stability of piperacillin and tazobactam for injection is not affected when administered using an ambulatory intravenous infusion pump.
2.8 Compatibility with Aminoglycosides
Due to the in vitro inactivation of aminoglycosides by piperacillin, piperacillin and tazobactam for injection and aminoglycosides are recommended for separate administration. Piperacillin and tazobactam for injection and aminoglycosides should be reconstituted, diluted, and administered separately when concomitant therapy with aminoglycosides is indicated [see
Drug Interactions (
7.1)
].
In circumstances where co-administration via Y-site is necessary, piperacillin and tazobactam for injection is compatible for simultaneous co-administration via Y-site infusion only with the following aminoglycosides under the following conditions:
Table 4: Compatibility with Aminoglycosides
Aminoglycoside | Piperacillin and Tazobactam for Injection Dose (grams) | Piperacillin and Tazobactam for Injection Diluent Volumea (mL) | Aminoglycoside Concentration Rangeb (mg/mL) | Acceptable Diluents |
Amikacin | 2.25 3.375 4.5 | 50 100 150 | 1.75 to 7.5 | 0.9% sodium chloride or 5% dextrose |
Gentamicin | 2.25 3.375 | 50 100 | 0.7 to 3.32 | 0.9% sodium chloride or |
| 4.5 | 150 | 5% dextrose |
a Diluent volumes apply only to single vials
b The concentration ranges in Table 4 are based on administration of the aminoglycoside in divided doses (10 to 15 mg/kg/day in two daily doses for amikacin and 3 to 5 mg/kg/day in three daily doses for gentamicin). Administration of amikacin or gentamicin in a single daily dose has not been evaluated. See package insert for each aminoglycoside for complete Dosage and Administration instructions.
Only the concentration and diluents for amikacin or gentamicin with the dosages of piperacillin and tazobactam for injection listed above have been established as compatible for co-administration via Y-site infusion. Simultaneous co-administration via Y-site infusion in any manner other than listed above may result in inactivation of the aminoglycoside by piperacillin and tazobactam.
Piperacillin and tazobactam for injection is not compatible with tobramycin for simultaneous co-administration via Y-site infusion. Compatibility of piperacillin and tazobactam for injection with other aminoglycosides has not been established.
Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit.