Vedco Veterinary 0.9% Sodium Chloride

Disclaimer: This product is intended for veterinary use only. It is manufactured in accordance with current good manufacturing practices (cGMP) and meets recognized standards for sterility and quality. This product is marketed as an unapproved veterinary drug in accordance with applicable regulations.

Sodium Chloride 0.9% for Irrigation | For Veterinary Use Only | Sterile-Non-pyrogenic

ROUTE OF ADMINISTRATION: For irrigation only

DESCRIPTION:

Active Ingredient: Sodium Chloride 0.9%
Vehicle: Water for Irrigation
Sodium Chloride 0.9% for Irrigation, USP is a sterile, nonpyrogenic solution supplied in a single-use container intended for irrigation use in animals. It contains no antimicrobial agents, bacteriostatic agents, or added buffers. The solution is prepared by distillation and is intended for irrigation only. It functions as an irrigating fluid for cleansing body cavities, tissues, wounds, and surgical sites during diagnostic and operative procedures. Composition, osmolarity, and pH are provided in Table 1.

Table 1.Sodium Chloride for Irrigation 0.9% Irrigation, USP

The plastic container, a semi-rigid bottle is made of clear polypropylene (PP) with printed product label, with white/red plastic cap, safety strap and liner. Packed in corrugated boxes, identified with a white label with the corresponding information.

Sodium Chloride 0.9% Irrigation, USP is sterile, nonpyrogenic and isotonic solution with an osmolarity of approximately 308 mOsmol/L. It is physiologically compatible with animal tissues and is intended for irrigation of body cavities, tissues, and surgical sites. The solution contains no antimicrobial agents or preservatives.

• Sodium Chloride 0.9% Irrigation, USP is indicated for irrigation of body cavities, tissues, wounds, and surgical sites in animals to cleanse, flush, or moisten during diagnostic and operative procedures.
• For irrigation only. Noto for injection. Not for parenteral administration.

Do not use for injection or parenteral administration. Do not use during electrosurgical procedures due to the risk of electrical conduction. Do not use in animals with known hypersensitivity to sodium chloride.

• For irrigation only. Not for injection or parenteral administration.
• See Instructions for Use for inspection guidelines.
• Large volumes of irrigation fluid may be absorbed systemically, which can lead to fluid and/or solute overload, dilution of serum electrolytes, overhydration, congested states, or pulmonary edema
• When used as a diluent, verify compatibility with additives
• The risk of dilutional states is inversely proportional to electrolyte concentration; the risk of solute overload is directly proportional to electrolyte concentration
• Avoid use during electrosurgical procedures due to potential electrical conduction risks
• Single-use container. Discard any unused portion promptly after opening to minimize the risk of contamination or pyrogen formation.

The container label bears the statement:
• See package insert for complete warnings
• Keep out of the reach of children

• Inspect solution before use. See Instructions for Use.
• Use with caution in animals with cardiac or renal impairment, or in those predisposed to fluid overload, as systemic absorption of irrigation fluid may occur
• Monitor for signs of overhydration, electrolyte imbalance, or congestive states, especially when large volumes are used or in small or compromised animals
• Do not use if the product is expired, the lot number is missing or illegible
• Maintain aseptic conditions

USE IN PREGNANT OR LACTATING ANIMALS:

The safety of Sodium Chloride 0.9% for Irrigation, USP has not been established in pregnant or lactating animals. Use only when the potential benefits justify the potential risks to the fetus or neonate. Veterinarian discretion is advised. A documented risk-benefit assessment is recommended.

ADVERSE EVENT REPORTING
To report suspected adverse reactions, contact Vedco Inc. at (888) 708-3326 or report to the FDA at 1-888-FDA-VETS or online at www.fda.gov/reportanimalae.

 If an adverse reaction occurs, discontinue irrigation immediately, evaluate the animal, and initiate appropriate veterinary treatment. Retain the remainder of the solution for examination if necessary.Reported adverse reactions include: Febrile response.Infection at the site of irrigation. Local irritation. Extravasation. Systemic effects such as hypervolemia if large volumes are absorbed

In cases of overhydration or solute overload due to systemic absorption of irrigation fluid, discontinue use immediately, reassess the animal’s clinical status, and implement appropriate corrective measures. [See Warnings, Precautions for additional information]

• This is a single-use container. See Instructions for Use for inspection guidelines.
• Use only as directed by a veterinarian. The volume used depends on the size of the animal, the area to be irrigated, and the clinical situation.
• Avoid excessive pressure during irrigation to prevent tissue damage and minimize systemic absorption
• Aseptic technique must be used throughout handling and administration.
• If additives are introduced, use aseptic technique and mix thoroughly
• Do not store any solution containing additives. See Shelf Life for disposal instructions.

Sodium Chloride 0.9% for Irrigation, USP solution is available in the following sizes:

BOTTLES                                                         NDC#

Sodium chloride 0.9% for Irrigation, 500 mL     NDC 50989-403-16

Sodium chloride 0.9% for Irrigation,1000 mL    NDC 50989-403-17

PLASTIC BOTTLE
NOTE: Before use, perform the following checks:

• Read the label. Verify the solution composition, lot number, and expiration date on the container.
• Do not use if the product is expired, the lot number is missing or illegible, or if the solution is cloudy or contains a precipitate.
• Invert the container and inspect in good light for leaks or particulate matter. If leaks are found or the seal is not intact, discard the solution.
• Use only if the solution is clear and the container and seal are intact.

Preparation for Administration:

1. Use aseptic technique when preparing and handling the container.
2. Outer Closure Removal – Grasp the container with one hand and turn the breakaway ring counterclockwise with the other hand until slight resistance is felt.
3. Then, twisting the container in the opposite direction, turn the breakaway ring sharply until the entire outer cap is loose and can be lifted off.
4. Remove screw cap and pour.
5. Once opened, use immediately and discard any unused portion.

INTRODUCTION OF ADDITIVES:
Warning: Some additives may be incompatible.

Known incompatible additives include:
• Strong oxidizing agents
• Alcohol-containing solutions
• Solutions with high electrolyte concentrations

Always verify compatibility before mixing. If incompatibility is suspected, do not use the mixture.

To Add Medication Before Solution Administration.
1. If additives are introduced, follow aseptic technique as described above.
2. Mix solution and medication thoroughly before use.

Store at a temperature not higher than 30ºC (86ºF). Avoid excessive heat. Protect from freezing.

CAUTION: Federal law restricts this drug for use by or on the order of a licensed veterinarian.

Distributed by:
Vedco Inc.
5503 Corporate Dr.
St. Joseph, MO 64507
(888) 708-3326
Manufactured in Dominican Republic

For Animal Use OnlyINSERT_Vedco_ Sodium chloride for irrigation_Page 1 INSERT_Vedco_ Sodium chloride for irrigation_Page 2 INSERT_Vedco_ Sodium chloride for irrigation_Page 3 INSERT_Vedco_ Sodium chloride for irrigation_Page 4 INSERT_Vedco_ Sodium chloride for irrigation_Page 5

For Veterinary Use Only 

Sodium Chloride 0.9% for Irigation, 500 mL NDC 50989-403-16

Sodium Chloride 0.9% for Irrigation, 1000 mL NDC 50989-403-17

BOTTLE_Vedco_ Sodium chloride for irrigation_500 mlBOTTLE_Vedco_ Sodium chloride for irrigation_1000 ml