FS Perox 50

Hazard statement(s):
May be harmful if swallowed. May cause eye irritation.
Precautionary statement(s):
Do not eat, drink or smoke while using this product. Wear protective gloves, clothing, and eye and face protection.
Hazards not otherwise classified: None Known
First Aid:
External: Immediately flush skin with plenty of cool, running water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Eyes: Immediately flush with plenty of cool, running water. Remove contact lenses; then continue flushing for at least 15 minutes, holding eyelids apart. Call a physician.
Internal: Call a physician immediately. If swallowed, do not induce vomiting. Rinse mouth, then immediately drink one or two large glasses of water or milk. Never give anything by mouth to an unconscious person.
Inhalation of vapors: Should not occur with proper use of this product
Most important symptoms/effects, acute and delayed: None Known
Immediate medical attention and special treatment needed, if any: None Known
IMPORTANT:
Do not mix Perox-50™ with any other teat spray, teat dip or other teat products.
Perox-50™ is not intended to cure or help the healing of chapped or irritated teats.
In case of teat irritation or chapping, have the condition examined.
Keep from freezing. If frozen, let thaw and shake thoroughly before using.

DIRECTIONS:
Pre-dipping: Just prior to milking - Dip, spray or foam teat with undiluted Perox 50™. Cover to base of udder. Allow 15 – 30 seconds of contact time. Dry with a single service towel before attaching milking units. If using dip cups, replace solution if it becomes visibly dirty.
Post dipping: Immediately after milking - dip, spray or foam teat with undiluted Perox 50™. Cover to the base of the udder. Allow to air dry. If using dip cups, replace solution if it becomes visibly dirty. During cold weather, do not turn cows out until the teats are dry to prevent chapping and freezing. If necessary, wipe dry with single service towel.

FOR CHEMICAL EMERGENCIES
CALL CHEMTREC AT 800-424-9300

FS Perox 50FS Perox 50