Cupramine

Copper is the preferred agent for the eradication of Oodinium, Cryptocaryon, Amyloodinium, Ichthyophthirius, and other external parasites in fish.

Cupramine™ is superior to copper sulfate, chloride & citrate: it is non-acidic, less toxic to fish, remains in solution, and does not contaminate the filter bed. It is superior to chelates: it is fully charged (ionic), and active at low concentrations, and is removable with carbon.

DIRECTIONS: Remove all invertebrates. Turn off UV sterilizer; remove chemical filtration. Use 1 mL (top mark of enclosed dispenser) per 40 L (10.5 US gallons) the first day, wait 48 hours, then repeat. In freshwater use half dose. Final copper concentration is 0.5 mg/L (0.25 mg/L in freshwater). Leave at this concentration for 14 days. Do not redose without testing (MultiTest®: Copper). Do not use in conjunction with any other medication. Do not add reducing agents (e.g. dechlorinators, ammonia removers) to water treated with Cupramine™. If tank has ever been treated with an ionic copper (e.g. copper chloride, sulfate or citrate), test copper level after initial dosing. Although most fish tolerate Cupramine™ to 0.8 mg/L, it is not advisable to exceed 0.6 mg/L copper. Remove with carbon or CupriSorb™.

Cu⁺² Concentration = 10,000 mg/L

Aquarium Use Only!
Keep Away from Children!

4 L treats 80,000 L
(21,000 gallons)

Seachem Laboratories Inc. • 1000 Seachem Drive, Madison, GA 30650 • www.seachem.com • Made in the USA

Cupramine™

Buffered Active Copper

Effective against Oodinium,
Cryptocaryon, Amyloodinium,
Ichthyophthirius, and Other
External Parasites in Fish

Marine or
Freshwater

Net 4 L (1.1 gal.)

Seachem^®