Clinimix, solution for infusion

Manufacturer
Baxter Healthcare Corporation | Baxter Healthcare Ltd
Effective date
2019-11-30
Label type
HUMAN PRESCRIPTION DRUG LABEL
Version
3
Source
legacy-cache
Hydrated at
2026-08-02 00:04:29

Label at a glance#

ProductClinimix
Active ingredientISOLEUCINE, LEUCINE, VALINE, LYSINE, METHIONINE, PHENYLALANINE, THREONINE, TRYPTOPHAN, ARGININE, HISTIDINE, ALANINE, GLYCINE, PROLINE, SERINE, TYROSINE, SODIUM ACETATE, POTASSIUM PHOSPHATE, DIBASIC, SODIUM CHLORIDE, MAGNESIUM CHLORIDE, DEXTROSE MONOHYDRATE, CALCIUM CHLORIDE
Label structure2 sections

Label contents#

Full prescribing information#

HEALTH CARE PROVIDER LETTER

HEALTH CARE PROVIDER LETTER SECTION

DHCP 1
DHCP 1
DHCP 2
DHCP 2
DHCP 3
DHCP 3
DHCP 4
DHCP 4
DHCP 5
DHCP 5
DHCP 6
DHCP 6
DHCP 7
DHCP 7
DHCP 8
DHCP 8
DHCP 9
DHCP 9
DHCP 10
DHCP 10
DHCP 11
DHCP 11
DHCP 12
DHCP 12
DHCP 13
DHCP 13
DHCP 14
DHCP 14
DHCP 15
DHCP 15
DHCP 16
DHCP 16

PACKAGE/LABEL PRINCIPAL DISPLAY PANEL

PACKAGE LABEL.PRINCIPAL DISPLAY PANEL

Clinimix FKB6670C Representative Container Label 1 of 2
Clinimix FKB6670C Representative Container Label 1 of 2
Container Label
Container Label

Code B6670C 2 x 500 ml
Baxter Logo
Clintec Logo Clinimix® N9G20E
- solution for infusion

5.5% Amino Acids
with Electrolytes (500 ml)
and Glucose 20%
with Calcium (500 ml)

Vertical Peel Seal Design
Characteristics of the mixture (1 litre):

Nitrogen 4.6 g
Total calories 510 kcal
Glucose calories 400 kcal
Osmolarity 980 mOsm/1
pH 6.0

Amino Acids (5.5%)
with electrolytes

Volume 500 ml
Amino acids 28 g
Glucose anhyd. -
Nitrogen 4.6 g
Glucose calories -
Sodium 35 mmol
Potassium 30 mmol
Magnesium 2.5 mmol
Calcium -
Chloride 35 mmol
Phosphate 15 mmol
Acetate 50 mmol

Glucose (20%)
with calcium

Volume 500 ml
Amino acids -
Glucose anhyd. 100 g
Nitrogen -
Glucose calories 400 kcal
Sodium -
Potassium -
Magnesium -
Calcium 2.3 mmol
Chloride 4.5 mmol
Phosphate -
Acetate -

Final Mixture

Volume 1000 ml
Amino acids 28 g
Glucose anhyd. 100 g
Nitrogen 4.6 g
Glucose calories 400 kcal
Sodium 35 mmol
Potassium 30 mmol
Magnesium 2.5 mmol
Calcium 2.3 mmol
Chloride 40 mmol
Phosphate 15 mmol
Acetate 50 mmol

Other ingredients:
Amino acids solution: Acetic acid, Water for injections
Glucose solution: Hydrochloric acid, Water for injections

Lot

Concentration of amino acids after mixing
(1 litre):
Essential amino acids

L-Leucine 2.01 g L-Valine 1.60 g
L-Phenylalanine 1.54 g L-Histidine 1.32 g
L-Methionine 1.10 g L-Threonine 1.16 g
L-Lysine HCI 2.00 g L-Tryptophan 0.50 g
L-Isoleucine 1.65 g

Non-essenlial amino acids

L-Alanine 5.70 g L-Proline 1.87 g
L-Arginine 3.17 g L-Serine 1.38 g
Glycine 2.84 g L-Tyrosine 0.11 g

For intravenous administration.
Sterile, non pyrogenic solutions.
Store in outer carton. Do not freeze.
Do not use unless solution is clear, peel seal is
intact and container is undamaged.
Do not connect in series.
Do not administer before or after administration of
blood through the same infusion equipment.

Warning: This solution is hypertonic and can cause
venous irritation.
Administer only after breaking the seal and mixing
the contents of both compartments.
The binary mixture is stable for 7 days at 2 to 8°C
followed by 48 hours below 25°C.
Following additions, the admixture should not be
kept for more than 24 hours at 2 to 8°C.
Refer to leaflet.
Additives may be incompatible.
Keep all medicines out of reach of children.
Do not reconnect partially used bag.

Baxter Healthcare Ltd
Caxton Way
Thetford Norfolk IP24 3SE
United Kingdom

88-25-44-604

Expiry date

1600

1000

800

600

400

200

Clinimix FKB6669C Representative Container Label 1 of 2
Clinimix FKB6669C Representative Container Label 1 of 2
Container Label
Container Label

Code B6669C
2 x 500 ml

Baxter Logo

CLINIMIX® N9G15E
Solution for infusion

Clintec Logo

5.5% Amino Acids
with Electrolytes (500 ml)
and Glucose 15%
with Calcium (500 ml)

Vertical Peel Seal Design
Characteristics of the mixture (1 litre):
Nitrogen 4.6 g
Total calories 410 kcal
Glucose calories 300 kcal
Osmolarity 845 mOsm/l
pH 6.0

  1. Amino Acids (5.5%)
    with electrolytes

Volume 500 ml
Amino acids 28 g
Glucose anhyd. -
Nitrogen 4.6 g
Glucose calories -
Sodium 35 mmol
Potassium 30 mmol
Magnesium 2.5 mmol
Calcium -
Chloride 35 mmol
Phosphate 15 mmol
Acetate 50 mmol

Glucose (15%)
with calcium

Volume 500 ml
Amino acids -
Glucose anhyd. 75 g
Nitrogen -
Glucose calories 300 kcal
Sodium -
Potassium -
Magnesium -
Calcium 2.3 mmol
Chloride 4.5 mmol
Phosphate -
Acetate -

Final Mixture

  1. Volume 1000 ml
    Amino acids 28 g
    Glucose anhyd. 75 g
    Nitrogen 4.6 g
    Glucose calories 300 kcal
    Sodium 35 mmol
    Potassium 30 mmol
    Magnesium 2.5 mmol
    Calcium 2.3 mmol
    Chloride 40 mmol
    Phosphate 15 mmol
    Acetate 50 mmol

Other ingredients:
Amino acids solution: Acetic acid, Water for injections
Glucose solution: Hydrochloric acid, Water for injections

Lot

Concentration of amino acids after mixing (1 litre):
Essential amino acids

  1. L-Leucine 2.01 g L-Valine 1.60 g
    L-Phenylalanine 1.54 g L-Histidine 1.32 g
    L-Methionine 1.10 g L-Threonine 1.16 g
    L-Lysine HCl 2.00 g L-Tryptophan 0.50 g
    L-Isoleucine 1.65 g

Non-essential amino acids

L-Alanine 5.70 g L-Proline 1.87 g
L-Arginine 3.17 g L-Serine 1.38 g
Glycine 2.84 g L-Tyrosine 0.11 g

For intravenous administration.
Sterile, non pyrogenic solutions.
Store in outer carton. Do not freeze.
Do not use unless solution is clear, peel seal is
intact and container is undamaged.
Do not connect in series.
Do not administer before or after administration of
blood through the same infusion equipment.

Warning: This solution is hypertonic
and can cause venous irritation.
Administer only after breaking the seal and mixing
the contents of both compartments.
The binary mixture is stable for 7 days at 2 to 8°C
followed by 48 hours below 25°C.
Following additions, the admixture should not be
kept for more than 24 hours at 2 to 8°C.
Refer to leaflet.
Additives may be incompatible.
Keep all medicines out of reach of children.
Do not reconnect partially used bag.

Baxter Healthcare Ltd
Caxton Way
Thetford Norfolk IP24 3SE
United Kingdom

TH-35-01-978

EXP

1600

1000

800

600

400

200

Clinimix FKB6654V Representative Container Label 1 of 2
Clinimix FKB6654V Representative Container Label 1 of 2
Container Label
Container Label

Code FKB6654V 2000 ml
Baxter Logo
CLINIMIX N14G30E
Solution for infusion

With Electrolytes

Formula for 2000 ml after mixing:
L-alanine 17.60 g
L-arginine 9.78 g
Glycine 8.76 g
L-histidine 4.08 g
L-isoleucine 5.10 g
L-leucine 6.20 g
L-lysine 4.93 g
(as lysine hydrochloride) (6.16 g)
L-methionine 3.40 g
L-phenylalanine 4.76 g
L-proline 5.78 g
L-serine 4.25 g
L-threonine 3.57 g
L-tryptophan 1.53 g
L-tyrosine 0.34 g
L-valine 4.93 g

Sodium acetate 3H2O 5.94 g
Dibasic potassium phosphate 5.22 g
Sodium chloride 1.54 g
Magnesium chloride 6H2O 1.02 g
Glucose anhydrous (as monohydrate) 300 g
Calcium chloride 2H2O 0.66 g

Acetic acid, hydrochloric acid, water for injections

2000 ml of final mixture provides the following:
Amino acids 85 g
Nitrogen 14.0 g
Glucose 300 g
Total calories 1540 kcal
Glucose calories 1200 kcal
Na+ 70 mmol
K+ 60 mmol
Mg++ 5.0 mmol
Ca++ 4.5 mmol
Acetate 140 mmol
Chloride 80 mmol
Phosphate 30 mmol
pH 6
Osmolarity 1415 mOsm/l

8.5% Amino Acids with
Electrolytes (1000 ml) and
Glucose 30% with Calcium
(1000 ml)

WARNING: Do not infuse
without opening the seal and
mixing the contents of the
two compartments

Read the package leaflet before use
Keep out of the reach and sight of children

For intravenous administration

Do not freeze
Store in the outer packaging in order to
protect from light
Do not use unless solution is clear and
container undamaged
For single use
Do not store partly used bags and discard
all equipment after use
Do not administer before or after
administration of blood through the same
infusion equipment
Additives may be incompatible
Check compatibility before use
Do not connect in series

From a microbiological point of view, it is
recommended that the product be used
immediately after mixing However, the
chemical and physical stability of the mixed
solution has been demonstrated for 7 days
(between 2°C and 8°C) followed by
48 hours at temperature not exceeding
25°C If not used immediately, the in
use storage time and conditions are the
responsibility of the user

PL 00116/0300
PA 167/98/4

Baxter Healthcare Limited
Caxton Way
Thetford
Norfolk
IP24 3SE
United Kingdom

POM Symbol

CLINIMIX N14G30E
Solution for infusion 2000 ml

TH-35-01-780

EXP

2600

2000

1600

1000

800

600

400

200

DailyMed Billing Units#

Package NDC, Billing unit, Product NDC table
Package NDCBilling unitProduct NDCDailyMed indexing SPLSPL versionEffective
0338-9566-08ML - Milliliter0338-95666ad72d9e-17b5-46ac-9ce4-3f67d332c95712018-01-12
0338-9570-08ML - Milliliter0338-9570620a10c0-c304-4d24-957d-4d9cd83df82412018-01-12
0338-9587-04ML - Milliliter0338-9587a2a0c9f7-34c5-4981-a0bb-fac55fa4e3c112018-01-12

Products#

Every source-derived product name is available through these pages.

DailyMed product names page 1 of 1 · 34 matching rows.

NDC Codes#

Product NDC, Package NDC table
Product NDCPackage NDC
0338-95660338-9566-08
0338-95700338-9570-08
0338-95870338-9587-04

Ingredients#

Every source-derived ingredient row is available through these pages.

DailyMed ingredient rows page 1 of 2 · 72 matching rows.

Source Document#

Source XML

openFDA label cross-check#

OpenFDA label data provides additional search and identifier links. DailyMed’s Structured Product Label is the canonical label on FDA.report. Matching records are deduplicated before they are shown below.

Matched openFDA labels page 1 of 1 · 1 matching rows.

Brand, Generic, Manufacturer table
BrandGenericManufacturerSPL set IDEffective dateAvailable safety fieldsJoin
830c8677-04ad-4014-a368-ddb6b819c9e3ae826725-59da-491a-9955-319cd0dae1162019-11-30Exact identifier
spl id: 830c8677-04ad-4014-a368-ddb6b819c9e3
spl set id: ae826725-59da-491a-9955-319cd0dae116

Reported adverse events (FAERS/openFDA)#

Adverse event summaries are temporarily unavailable. Other product information remains available.