Active ingredient
Water Additive
Purified water 95%
Purpose
Water Additive
Flushing Agent
Uses
Water Additive
for flushing the eye to reduce chance of severe injury caused by acid, alkali, or particulate contamination
Warnings
Water Additive
For exterfnal use only
- To avoid contamination, do not touch tip of container to any surface,
Do not use
- in concentrated form
- while wearing contact lenses
- it solution changes color or becomes cloudy
- for injection
- in intraocular surgery
- intrernally
Ask a doctor if you have
eye pain,
changes in vision
redness or irritation of eye after use
an injury caused by an alkali
`
Keep out of reach of children
If swallowed, get medical help or contact a Poison Control Center right away.
Directions
Water Additive
Mix additive with potable water as follows:
- Wear protective eyewear and gloves
- Follow sanitary procedures
- Thoroughly clean potable eyewah station and rinse with potable water
- Use a clean container of sufficient capacity to mix enough solution to fill eyewash station. Solution may be mixed directly in eyewash station
- Add entire contents of the bottle to the container
- Fill the station to the manufacturer's required level and mix and agitate thoroughly
- Date station inspection tag
- Station should be cleaned and refilled every 120 days when using the product
- Properly dispose of empty bottle after use
-
Do not reuse
Other information
Water Additive
- Do not use if seal is broken
- Do not freeze
- Do not use if eye is lacerated or object is embedded
- For use in emergency eyewash stations only
- Mix per directions
- Sperian Water Additive must not be used undiluted or in solution for any other purpose
- Do not add any other chemicals or materials to this solution
- Avoid contact with skin
- Store between 35
o F - 100
o F (2
o C - 38
o C)
Inactive ingredient
Water Additive
chlorhexidene digluconate
Principle Display Panel
