THROMBIN-JMI (thrombin, topical- bovine kit

THROMBIN-JMI by

Drug Labeling and Warnings

THROMBIN-JMI by is a Other medication manufactured, distributed, or labeled by Pfizer Laboratories Div Pfizer Inc, Pharmacia & Upjohn Company LLC. Drug facts, warnings, and ingredients follow.

Drug Details [pdf]

  • BOXED WARNING (What is this?)

    WARNING: SEVERE BLEEDING AND THROMBOSIS COMPLICATIONS

    • THROMBIN-JMI® can cause fatal severe bleeding or thrombosis. Thrombosis may result from the development of antibodies against bovine thrombin. Bleeding may result from the development of antibodies against factor V. These may cross-react with human factor V and lead to its deficiency.
    • Do not re-expose patients to THROMBIN-JMI if there are known or suspected antibodies to bovine thrombin and/or factor V.
    • Monitor patients for abnormal coagulation laboratory values, bleeding, or thrombosis.
  • 1 INDICATIONS AND USAGE

    THROMBIN-JMI is topical bovine thrombin indicated to aid hemostasis whenever oozing blood and minor bleeding from capillaries and small venules is accessible and control of bleeding by standard surgical techniques (such as suture, ligature, or cautery) is ineffective or impractical.

    In various types of surgeries, solutions of THROMBIN-JMI may be used in conjunction with an Absorbable Gelatin Sponge, USP for hemostasis.

  • 2 DOSAGE AND ADMINISTRATION

    For topical use on the surface of bleeding tissue only. Do not inject.

    2.1 Reconstitution

    • For routine use, reconstitute THROMBIN-JMI with sterile isotonic saline at a recommended concentration of 1,000 to 2,000 International Units per mL.
    • Where bleeding is profuse, as from abraded surfaces of liver or spleen, concentrations of 1,000 International Units per mL may be required.
    • For general use in plastic surgery, dental extractions, skin grafting, etc. solutions containing approximately 100 International Units per mL are frequently used. Prepare intermediate strengths to suit the needs of the case by diluting the contents of the THROMBIN-JMI container with an appropriate volume of sterile isotonic saline. THROMBIN-JMI can be used in a dry form on oozing surfaces.
    • In instances where a concentration of approximately 1,000 units per mL is desired, the contents of the vial of sterile isotonic saline diluent may be transferred into the THROMBIN-JMI container with a sterile syringe or sterile transfer device.
    • For use with GEL-FLOW™ NT, reconstitute THROMBIN-JMI 5,000 IU powder with 5 mL sterile isotonic saline and use Thrombin-JMI Thrombin solution according to the directions for use in the GEL-FLOW™ NT package insert.

    If the transfer device is used for reconstitution, transfer the diluent in the following manner:

    1. Remove the plastic cap off of the diluent vial.
    2. Remove the Tyvek cover from the transfer device container. Do not remove the device from the package.
    3. Seat the blue end of the device on the diluent vial, pushing down until the spike penetrates the diaphragm and the device snaps in place.

      Figure

    4. Flip the plastic cover off on the THROMBIN-JMI container. DO NOT REMOVE THE ALUMINUM SEAL.
    5. Remove the plastic package from the transfer device. Do not touch the exposed end of the device.
    6. Invert the vial of diluent and insert the clear end of the transfer device into the diaphragm of the THROMBIN-JMI container.

      Figure

    CAUTION: Solutions should be used promptly upon removal from the container. However, the solution may be refrigerated at 2°C – 8°C for up to 24 hours, or may be stored at room temperature for up to 8 hours after reconstitution.

    THROMBIN-JMI PUMP SPRAY KIT

    Refer to THROMBIN-JMI Pump Spray Kit instructions for spray pump assembly and use.

    Each spray kit contains one vial of THROMBIN-JMI, one vial of diluent and one spray pump and actuator.

    1. Remove the outer lid by pulling up at the indicated edge. The inner tray is sterile and suitable for introduction into any operating field.
    2. Remove the cover on inner tray to expose sterile contents.
    3. Reconstitute the THROMBIN-JMI to desired potency by introducing sterile isotonic saline with a sterile syringe or a sterile transfer device. If the transfer device is used, follow the previously described procedure.
    4. When the THROMBIN-JMI is completely dissolved, open vial by flipping up metal and tearing counterclockwise.
    5. Remove the rubber diaphragm from vial. Remove pump with protective cap from tray and snap onto vial.

      Figure

    6. Remove protective cap and attach actuator.

      Figure

    7. To spray, hold vial upright or at a slight angle. Several strokes of the pump will be required to expel the solution.
    8. Discard unused contents and pump: DO NOT TRANSFER SPRAY PUMP TO ANOTHER VIAL.

    THROMBIN-JMI SYRINGE SPRAY KIT

    Refer to THROMBIN-JMI Syringe Spray Kit instructions for spray syringe assembly and use. Each syringe kit contains one vial of THROMBIN-JMI, one vial of diluent and one spray tip and syringe.

    1. Remove the outer lid by pulling up at the indicated edge. The inner tray is sterile and suitable for introduction into any operating field.
    2. Remove the cover on the inner tray to expose sterile contents.
    3. Using the sterile syringe equipped with a transfer device, draw the desired amount of saline diluent from the vial into the syringe.
    4. Inject the saline diluent into the THROMBIN-JMI thrombin vial from the syringe to reconstitute the THROMBIN-JMI thrombin powder.
    5. When the THROMBIN-JMI powder is completely dissolved, draw the THROMBIN-JMI Thrombin solution into the syringe.
    6. Remove the syringe from the transfer device by turning syringe counterclockwise.

      Figure

    7. Affix spray tip by pushing down and turning clockwise until the spray tip locks in place.

      Figure

    8. To spray, depress the syringe plunger in a normal fashion to dispense the THROMBIN-JMI Thrombin solution through the tip in a fine spray.
    9. Discard unused contents and syringe.

    For use of Thrombin-JMI 5,000 IU Syringe Spray Kit with GEL-FLOW™ NT:

    1. Remove the outer lid by pulling up at the indicated edge. The inner tray is sterile and suitable for introduction into any operating field.
    2. Remove the cover on the inner tray to expose sterile contents.
    3. Using the sterile syringe equipped with a transfer device, draw all of the 5 mL of the saline diluent from the vial into the syringe.
    4. Inject the saline diluent into the THROMBIN-JMI thrombin vial from the syringe to reconstitute the THROMBIN-JMI thrombin powder.
    5. When the THROMBIN-JMI powder is completely dissolved, draw the THROMBIN-JMI Thrombin solution into the syringe.
    6. Remove the syringe from the transfer device by turning syringe counterclockwise.

      Figure

    7. DISCARD the SPRAY TIP.
    8. Use Thrombin-JMI Thrombin solution syringe according to the directions for use in the GEL-FLOW™ NT package insert.

    THROMBIN-JMI EPISTAXIS KIT

    Refer to THROMBIN-JMI Epistaxis Kit instructions for accessory assembly and use.

    Each epistaxis kit contains one vial of THROMBIN-JMI, one vial of diluent and one nasal drug delivery device.

    1. Remove the outer lid by pulling up at the indicated edge. The inner tray is sterile and suitable for introduction into any operating field.
    2. Remove the cover on the inner tray to expose sterile contents.
    3. Using the sterile syringe equipped with a transfer device, draw the desired amount of saline diluent from the vial into the syringe.
    4. Inject the saline diluent into the THROMBIN-JMI thrombin vial from the syringe to reconstitute the THROMBIN-JMI thrombin powder.
    5. When the THROMBIN-JMI powder is completely dissolved, draw the THROMBIN-JMI Thrombin solution into the syringe.
    6. Remove the syringe from the transfer device by turning syringe counterclockwise.

      Figure

    7. Affix the nasal drug delivery device on to the syringe by pushing the device down onto the THROMBIN-JMI thrombin solution filled syringe and turn clockwise until the nasal drug delivery device locks in place.

      Figure

    8. Insert the nasal drug delivery device into the naris and spray the THROMBIN-JMI thrombin solution onto the nasal mucosa through the nasal drug delivery device by depressing the syringe plunger using mild or moderate pressure on the syringe plunger.
    9. After administration of THROMBIN-JMI, the device may be removed immediately or briefly held in the nasal passage.
    10. Discard the unused contents, nasal drug delivery device, and the syringe.

    2.2 Administration

    Topical application of THROMBIN-JMI

    1. The recipient surface should be sponged (not wiped) free of blood before THROMBIN-JMI is applied.
    2. A spray may be used or the surface may be flooded using a sterile syringe and small gauge needle. The most effective hemostasis results occur when the THROMBIN-JMI mixes freely with the blood as soon as it reaches the surface.
    3. Sponging of the treated surfaces should be avoided to assure that the clot remains securely in place.

    Use in conjunction with Absorbable Gelatin Sponge

    Consult the Absorbable Gelatin Sponge, USP labeling for complete information for use prior to utilizing the following thrombin saturated sponge procedure.

    1. Prepare THROMBIN-JMI solution to desired strength.
    2. Immerse sponge strips of the desired size in THROMBIN-JMI solution. Knead the sponge strips vigorously with moistened, gloved fingers to remove trapped air, thereby facilitating saturation of the sponge.
    3. Apply saturated sponge to bleeding area. Hold in place with a pledget of cotton or a small gauze sponge until hemostasis occurs.

    Use in conjunction with GEL-FLOW™ NT

    THROMBIN-JMI may also be used with GEL-FLOW™ NT according to the directions for use in the GEL-FLOW™ NT package insert.

  • 3 DOSAGE FORMS AND STRENGTHS

    THROMBIN-JMI (Thrombin, Topical (Bovine) U.S.P.), Solution for topical use is supplied in the following packages:

    Vial: 5,000 IU vial with 5 mL diluent.

    Vial: 20,000 IU vial with 20 mL diluent.

    THROMBIN-JMI Pump Spray Kit is supplied in the following packages:

    Pump Spray Kit: 20,000 IU vial with 20 mL diluent, spray pump and actuator.

    THROMBIN-JMI Syringe Spray Kit is supplied in the following packages:

    Syringe Spray Kit: 5,000 IU vial with 5 mL diluent, spray tip and syringe.

    Syringe Spray Kit: 20,000 IU vial with 20 mL diluent, spray tip and syringe.

    THROMBIN-JMI Epistaxis Kit is supplied in the following packages:

    5,000 IU vial with 5 mL diluent, nasal drug delivery device and syringe.

    THROMBIN-JMI® is supplied in the Gelfoam-JMI™ Kits:

    Gelfoam-JMI™ Sponge Kit (Gelfoam® Absorbable Gelatin Sponge, USP and Thrombin, Topical (Bovine) U.S.P., THROMBIN-JMI®, 5,000 IU vial with 5 mL diluent).

    Gelfoam-JMI™ Powder Kit (Gelfoam® Absorbable Gelatin Powder and Thrombin, Topical (Bovine) U.S.P., THROMBIN-JMI®, 5,000 IU with 5 mL diluent).

    THROMBIN-JMI® 5,000 IU Syringe Spray Kit is supplied in the GEL- FLOW™ Kit:

    GEL-FLOW™ Kit (GEL-FLOW™ NT Absorbable Gelatin Powder and Thrombin, Topical (Bovine) U.S.P., THROMBIN-JMI®, 5,000 IU Syringe Spray Kit).

  • 4 CONTRAINDICATIONS

    • Do not inject directly into the circulatory system. Because of its action in the clotting mechanism, THROMBIN-JMI can cause extensive intravascular clotting or death.
    • Do not re-expose patients to THROMBIN-JMI if there are known or suspected antibodies to bovine thrombin and/or factor V.
    • Do not administer to patients with a history of hypersensitivity to THROMBIN-JMI, its components and/or to material of bovine origin.
    • Do not use for treatment of severe or brisk arterial bleeding.
  • 5 WARNINGS AND PRECAUTIONS

    Warning: Severe Bleeding and Thrombosis Complications

    5.1 Hypersensitivity Reactions

    • Allergic reactions, including anaphylactic/anaphylactoid reactions, have been reported following administration of THROMBIN-JMI.
    • Institute intensive supportive measures and treat individual symptoms. Secure the airway and establish adequate respiratory exchange.

    5.2 Thrombosis

    THROMBIN-JMI causes thrombosis if it enters the circulatory system. Apply topically. DO NOT INJECT.

    5.3 Immunogenicity

    Inhibitory antibodies may develop in patients and interfere with hemostasis. Monitor patients for abnormal coagulation laboratory values, bleeding, or thrombosis.

  • 6 ADVERSE REACTIONS

    The most common adverse reactions (incidence greater than or equal to 2%) following administration of THROMBIN-JMI were: hypersensitivity, bleeding, anemia, post-operative wound infection, thromboembolic events, hypotension, pyrexia, tachycardia and thrombocytopenia.

    6.1 Clinical Trials Experience

    Because clinical trials are conducted under widely varying conditions, adverse reaction rates observed in the clinical trials of a drug cannot be directly compared to rates in the clinical trials of another drug and may not reflect the rates observed in practice.

    The safety assessment of THROMBIN-JMI is based primarily on the review of post marketing experience including three (3) randomized controlled clinical trials in which THROMBIN-JMI was used as a comparator and one (1) observational study. In these studies, the most common adverse reactions (incidence greater than or equal to 2%) following administration of THROMBIN-JMI were: hypersensitivity, bleeding, anemia, post-operative wound infection, thromboembolic events, hypotension, pyrexia, tachycardia and thrombocytopenia [see Clinical Studies (14)].

    6.2 Postmarketing Experience

    The following serious adverse reactions have been identified during post approval use of THROMBIN-JMI: anaphylactic reactions, prolonged prothrombin time, prolonged activated partial thromboplastin time, disseminated intravascular coagulation, factor V deficiency, post-procedural hematoma, swelling and Staphylococcal wound infection. Because these reactions are reported voluntarily from a population of uncertain size, it is not always possible to reliably estimate their frequency or establish a causal relationship to drug exposure.

  • 8 USE IN SPECIFIC POPULATIONS

    8.1 Pregnancy

    Animal reproduction studies have not been conducted with THROMBIN-JMI. It is also not known whether THROMBIN-JMI can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. THROMBIN-JMI should be given to a pregnant woman only if clearly needed.

    8.2 Labor and Delivery

    Information is unknown.

    8.3 Nursing Mothers

    It is not known whether this drug is excreted in human milk. Because many drugs are excreted in human milk, caution should be exercised when THROMBIN-JMI is administered to a nursing woman.

    8.4 Pediatric Use

    Safety and effectiveness in children have not been established

    8.5 Geriatric Use

    Clinical studies of THROMBIN-JMI did not include sufficient numbers of subjects aged 65 and over to determine whether they respond differently from younger subjects. Other reported clinical experience has not identified differences in responses between the elderly and younger patients. In general, dose selection for an elderly patient should be cautious, usually starting at the low end of the dosing range, reflecting the greater frequency of decreased hepatic, renal, or cardiac function, and of concomitant disease or other drug therapy.

  • 11 DESCRIPTION

    THROMBIN-JMI, Thrombin, Topical (Bovine), is a protein substance produced through a conversion reaction in which prothrombin of bovine origin is activated by tissue thromboplastin of bovine origin in the presence of calcium chloride. It is supplied as a sterile powder that has been freeze-dried in the final container. Also contained in the preparation are mannitol and sodium chloride. Mannitol is included to make the dried product friable and more readily soluble. The product contains no preservative.

    THROMBIN-JMI has been chromatographically purified and further processed by ultrafiltration. Analytical studies demonstrate the current manufacturing process' capability to remove significant amounts of extraneous proteins, and result in a reduction of factor Va light chain content to levels below the limit of detection of semi-quantitative Western Blot assay (<92 ng/mL, when reconstituted as directed). The clinical significance of these findings is unknown.

  • 12 CLINICAL PHARMACOLOGY

    12.1 Mechanism of Action

    THROMBIN-JMI requires no intermediate physiological agent for its action. It activates platelets and catalyzes the conversion of fibrinogen to fibrin, which are essential steps for clot formation. Failure to clot blood occurs in the case where the primary clotting defect is the absence of fibrinogen itself. The speed with which thrombin clots blood is dependent upon the concentration of both thrombin and fibrinogen.

  • 13 NONCLINICAL TOXICOLOGY

    13.2 Animal Toxicology and/or Pharmacology

    Thrombin Concentration Study

    In a blinded pre-clinical study conducted on a liver lesion model in swine, an inverse dose related response was observed between the visual bleeding scores and the thrombin1 concentration within the absorbable gelatin powder delivery system (GEL-FLOW™ NT) syringe, a device containing 550 mg of absorbable gelatin powder (GELFOAM® Powder). Bleeding was assigned scores according to a visual scale, with scores of 0 (no bleeding), 0.5 (ooze), 1 (very slight), 2 (slight), 3 (moderate), and 4 (severe). Scores of 1 and less were considered clinically acceptable. The 770 IU/mL thrombin concentration provided statistically significant lower bleeding scores than either 375 IU/mL or 250 IU/mL thrombin concentrations2 (Table 1). The results of this study showed that higher concentrations of thrombin within the GEL-FLOW™ NT syringe resulted in improved hemostasis as measured by lower bleeding scores.

    Table 1: Comparison of Effect on Hemostasis of Varying Thrombin Concentrations in GEL-FLOW™ NT as Measured by Bleeding Scores in Swine Liver Lesion Model
    Comparison of Effect on Bleeding Scores of Varying Thrombin Concentrations in GEL-FLOW™ NT in Animal Model using Repeated Measures Logistic Regression
    Parameter250 IU/mL
    Mean (Standard Error)
    375 IU/mL
    Mean (Standard Error)
    770 IU/mL
    Mean (Standard Error)
  • * Significantly different from both 250 and 375 IU/mL at <0.001 significance level. Tukey adjusted p-values for multiple comparisons.
  • Significantly different from 250 IU/mL at the 0.05 significance level. Tukey adjusted p-value for multiple comparisons.
  • 3 Minute Bleeding Score1.8 (0.2)1.6 (0.2)0.7 (0.2)*
    6 Minute Bleeding Score1.7 (0.2)1.5 (0.2)0.6 (0.2)*
    9 Minute Bleeding Score1.5 (0.2)1.2 (0.2)0.5 (0.2)*
    12 Minute Bleeding Score1.4 (0.2)1.0 (0.2)0.4 (0.2)*

  • 1 THROMBIN-JMI (Thrombin, Topical (Bovine) USP) was used for all thrombin concentrations tested in this study.
  • 2 Per the THROMBIN-JMI prescribing information, for routine use THROMBIN-JMI is reconstituted with sterile isotonic saline at a recommended concentration of 1,000 to 2,000 International Units per mL.
  • 14 CLINICAL STUDIES

    In a randomized, double-blinded, controlled trial that compared recombinant human thrombin to THROMBIN-JMI, 206 patients received THROMBIN-JMI and 205 patients received recombinant human thrombin as adjuncts to hemostasis in liver resection, spine, peripheral arterial bypass, and dialysis access surgeries. Four hundred one (401) patients completed the trial. The reported adverse reactions in both treatment groups were: cardiac events (18%), hypersensitivity (17%), other infections (15%), bleeding (11%), postoperative wound infection (10%) and thromboembolic events (5%). Among 200 patients who were evaluated for the presence of antibodies to THROMBIN-JMI, 10 patient (5%) were positive at baseline and 43 (21.5%) after treatment. The seroconversion rate in THROMBIN-JMI group was 18.4%.

    In another multicenter, prospective, randomized, double-blinded, controlled trial that compared plasma-derived human thrombin to THROMBIN-JMI, 152 patients received THROMBIN-JMI and 153 patients received human thrombin applied topically to the target bleeding site with a gelatin sponge. Serious adverse reactions (pyrexia and post-procedural hematoma) were reported in two patients receiving THROMBIN-JMI. In this study, 16 out of 126 (12.7%) patients who received THROMBIN-JMI demonstrated seroconversion for at least one of the four antibodies assayed. The four separate ELISA assays used to detect development of antibodies and the corresponding antibody development rates included: 1) Anti-bovine thrombin 10/126 (7.94%), 2) Anti-bovine factor V/Va 12/126 (9.52%), 3) Anti-human thrombin 3/126 (2.38%) and 4) Anti-human factor V/Va 0/126 (0%).The effect of repeat exposure was evaluated in a third multi-center, prospective, randomized, double-blinded, controlled trial on 72 patients with diabetic foot ulcers, using a gel prepared with THROMBIN-JMI and autologous platelet rich plasma that was applied weekly for 12 weeks. Forty (40) patients were treated with the gel at fourteen (14) sites. Safety parameters were evaluated during the 12 weeks of treatment and the three month follow-up period. No serious adverse reactions related to the gel treatment were reported.

    A total of 554 subjects were enrolled, in a multi-center, open-label, observational study (MOSAIC) conducted to assess the effect of possible exposure to THROMBIN-JMI on activated partial thromboplastin time (aPTT) at 48 hours post-surgery in subjects with likelihood of prior exposure to THROMBIN-JMI within the past 4 years. Of the 554 subjects, 550 had undergone surgery and completed the study. A total of 384 subjects undergoing vascular surgeries, neurosurgeries and orthopedic surgeries were exposed to THROMBIN-JMI (5,000 international units to 20,000 international units).

    In this study, the impact of exposure to THROMBIN-JMI in 78 subjects who were positive for anti-bovine thrombin (aBT) antibodies prior to surgery was compared with 140 subjects who did not have any aBT antibodies and were not exposed to THROMBIN-JMI. The study did not meet the pre-specified primary endpoint, a mean change from baseline in aPTT at 48 hours post-surgery. The study was not powered to detect coagulopathy related to an immune response after bovine thrombin use.

    A post hoc analysis was performed in which subjects who underwent surgery were re-assigned to one of four exploratory cohorts based on the presence or absence of pre-surgery anti-bovine factor V/anti-bovine factor V active (aBV/Va) antibodies and whether or not they were administered THROMBIN-JMI during the study surgery. Non-inferiority (based on aPTT) was observed in these exploratory cohorts at all-time points of 48 hours, 4 weeks and 8 weeks post-surgery.

    For the primary study cohort (THROMBIN-JMI use in subjects with baseline positive aBT or positive aBV/Va), there was a higher incidence of seroconversion from anti human thrombin (aHT) negative at baseline to post-surgery positive compared to the primary reference cohort (no THROMBIN-JMI use in subjects with baseline negative aBT or negative aBV/Va). This difference was not present at 48 hours after surgery but was evident at 4 weeks and 8 weeks post-surgery. A similar immunological response with aBT and aBV/Va antibodies was observed following THROMBIN-JMI administration.

    Secondary immune responses in patients treated with THROMBIN-JMI were evidenced by the generation of anti-bovine and anti-human thrombin and factor V/Va antibodies, consistent with known immunogenicity of topical bovine thrombin.

  • 16 HOW SUPPLIED/STORAGE AND HANDLING

    Not made with natural rubber latex.

    THROMBIN-JMI® is supplied in the following packages:

    •   NDC 60793-215-05
      Vial: 5,000 IU vial with 5 mL diluent.
    •   NDC 60793-217-20
      Vial: 20,000 IU vial with 20 mL diluent.

    THROMBIN-JMI® Pump Spray Kit is supplied in the following package:

    •   NDC 60793-217-21
      Pump Spray Kit: 20,000 IU vial with 20 mL diluent, spray pump and actuator.

    THROMBIN-JMI® Syringe Spray Kit is supplied in the following packages:

    •   NDC 60793-705-05
      Syringe Spray Kit: 5,000 IU vial with 5 mL diluent, spray tip and syringe.
    •   NDC 60793-217-22
      Syringe Spray Kit: 20,000 IU vial with 20 mL diluent, spray tip and syringe.

    THROMBIN-JMI® Epistaxis Kit is supplied in the following package:

    •   NDC 60793-205-05
      Epistaxis Kit: 5,000 IU vial with 5 mL diluent, nasal drug delivery device and syringe.

    THROMBIN-JMI® is supplied in the Gelfoam-JMI™ Kits:

    •   GTIN 00360793310107 (60793-310-10)
      Gelfoam-JMI™ Sponge Kit (Gelfoam® Absorbable Gelatin Sponge, USP and Thrombin, Topical (Bovine) U.S.P., THROMBIN-JMI®, 5,000 IU vial with 5 mL diluent).
    •   GTIN 00360793410104 (60793-410-10)
      Gelfoam-JMI™ Powder Kit (Gelfoam® Absorbable Gelatin Powder and Thrombin, Topical (Bovine) U.S.P., THROMBIN-JMI®, 5,000 IU with 5 mL diluent).

    THROMBIN-JMI® 5,000 IU Syringe Spray Kit is supplied in the GEL- FLOW™ Kit:

    •   GTIN 00300092250018
      GEL-FLOW™ Kit (GEL-FLOW™ NT Absorbable Gelatin Powder and Thrombin, Topical (Bovine) U.S.P., THROMBIN-JMI®, 5,000 IU Syringe Spray Kit).

    Store THROMBIN-JMI at 2°C – 25°C (36°F – 77°F).

  • 17 PATIENT COUNSELING INFORMATION

    Because THROMBIN-JMI may cause the formation of clots in blood vessels if absorbed systemically, advise patients to consult their physician if they experience leg tenderness or swelling, chest pain, shortness of breath, or difficulty speaking or swallowing.

    Manufactured by: GenTrac, Incorporated, Middleton, Wisconsin 53562

    Distributed by Pfizer Inc, New York, New York 10017

    US License No. 977

  • SPL UNCLASSIFIED SECTION

    LAB-0604-11.0

  • PRINCIPAL DISPLAY PANEL - 5,000 IU Vial Label

    NDC: 60793-315-01

    THROMBIN,
    TOPICAL
    (BOVINE), U.S.P.
    THROMBIN-JMI®

    5,000 International Units

    Pfizer

    Rx Only

    PRINCIPAL DISPLAY PANEL - 5,000 IU Vial Label
  • PRINCIPAL DISPLAY PANEL - 5 mL Vial Label

    NDC: 60793-218-09

    SODIUM
    CHLORIDE

    U.S.P. 0.9% for
    THROMBIN, TOPICAL
    (BOVINE), U.S.P.
    THROMBIN-JMI®

    5 mL

    Pfizer

    Rx Only

    PRINCIPAL DISPLAY PANEL - 5 mL Vial Label
  • PRINCIPAL DISPLAY PANEL - 5000 IU Vial Kit Carton

    FOR TOPICAL USE ONLY – DO NOT INJECT

    THROMBIN, TOPICAL (BOVINE), U.S.P.
    THROMBIN-JMI®

    5,000 International Units

    CONTAINS NO PRESERVATIVE
    STORE AT 2-25°C (36-77°F)
    SEE PACKAGE INSERT FOR COMPLETE DIRECTIONS

    CONTENTS:

    ONE VIAL 5,000
    UNITS THROMBIN

    ONE VIAL 5 mL
    DILUENT

    ONE TRANSFER
    DEVICE

    Pfizer

    PRINCIPAL DISPLAY PANEL - 5000 IU Vial Kit Carton
  • PRINCIPAL DISPLAY PANEL - 20,000 IU Vial Label

    NDC: 60793-317-01

    THROMBIN,
    TOPICAL
    (BOVINE), U.S.P.
    THROMBIN-JMI®

    20,000
    International Units

    Pfizer

    Rx Only

    PRINCIPAL DISPLAY PANEL - 20,000 IU Vial Label
  • PRINCIPAL DISPLAY PANEL - 20 mL Vial Label

    NDC: 60793-221-09

    SODIUM
    CHLORIDE

    U.S.P. 0.9% for
    THROMBIN, TOPICAL (BOVINE), U.S.P.
    THROMBIN-JMI®

    20 mL

    Pfizer

    Rx Only

    PRINCIPAL DISPLAY PANEL - 20 mL Vial Label
  • PRINCIPAL DISPLAY PANEL- 20,000 IU Vial Kit Carton

    FOR TOPICAL USE ONLY – DO NOT INJECT

    THROMBIN, TOPICAL (BOVINE), U.S.P.
    THROMBIN-JMI®

    20,000 International Units

    CONTAINS NO PRESERVATIVE
    STORE AT 2-25°C (36-77°F)
    SEE PACKAGE INSERT FOR COMPLETE DIRECTIONS

    CONTENTS:

    ONE VIAL 20,000
    UNITS THROMBIN

    ONE VIAL 20 mL
    DILUENT

    ONE TRANSFER
    DEVICE

    Pfizer

    PRINCIPAL DISPLAY PANEL - 20,000 IU Vial Kit Carton
  • PRINCIPAL DISPLAY PANEL - 20,000 IU Pump Spray Kit Tray

    FOR TOPICAL USE ONLY – DO NOT INJECT

    NDC: 60793-217-21

    THROMBIN, TOPICAL (BOVINE), U.S.P.
    THROMBIN-JMI®

    20,000 International Units

    CONTAINS NO PRESERVATIVE
    STORE AT 2-25°C (36-77°F)
    SEE PACKAGE INSERT FOR COMPLETE DIRECTIONS
    NOT MADE WITH NATURAL RUBBER LATEX.

    Rx Only

    PUMP SPRAY KIT
    CONTENTS – STERILE UNLESS TRAY IS OPENED OR DAMAGED:

    ONE VIAL 20,000
    UNITS THROMBIN

    ONE VIAL
    20 mL DILUENT

    ONE TRANSFER
    DEVICE

    ONE SPRAY PUMP
    AND ACTUATOR

    Pfizer

    PAA108460

    Manufactured by: GenTrac, Incorporated,
    Middleton, Wisconsin 53562
    Distributed by Pfizer Inc,
    New York, NY 10017
    US License No. 977

    PRINCIPAL DISPLAY PANEL - 20,000 IU Pump Spray Kit Tray
  • PRINCIPAL DISPLAY PANEL - 20,000 IU Pump Spray Kit Carton

    FOR TOPICAL USE ONLY – DO NOT INJECT

    THROMBIN, TOPICAL (BOVINE), U.S.P.
    THROMBIN-JMI®

    NDC: 60793-217-21

    20,000 International Units

    CONTAINS NO PRESERVATIVE
    STORE AT 2-25°C (36-77°F)
    SEE PACKAGE INSERT FOR COMPLETE DIRECTIONS
    NOT MADE WITH NATURAL RUBBER LATEX.

    Rx Only

    PUMP SPRAY KIT
    CONTENTS – STERILE UNLESS TRAY IS OPENED OR DAMAGED:

    ONE VIAL 20,000
    UNITS THROMBIN

    ONE VIAL
    20 mL DILUENT

    ONE TRANSFER
    DEVICE

    ONE SPRAY PUMP
    AND ACTUATOR

    Pfizer

    PRINCIPAL DISPLAY PANEL - 20,000 IU Pump Spray Kit Carton
  • PRINCIPAL DISPLAY PANEL - 20,000 IU Syringe Spray Kit Tray

    FOR TOPICAL USE ONLY – DO NOT INJECT

    NDC: 60793-217-22

    THROMBIN, TOPICAL (BOVINE), U.S.P.
    THROMBIN-JMI®

    20,000 International Units

    CONTAINS NO PRESERVATIVE
    STORE AT 2-25°C (36-77°F)
    SEE PACKAGE INSERT FOR COMPLETE DIRECTIONS
    NOT MADE WITH NATURAL RUBBER LATEX.

    Rx Only

    SYRINGE SPRAY KIT
    CONTENTS – STERILE UNLESS TRAY IS OPENED OR DAMAGED:

    ONE VIAL 20,000
    UNITS THROMBIN

    ONE VIAL
    20 mL DILUENT

    ONE TRANSFER
    DEVICE

    ONE STERILE DISPOSABLE SYRINGE
    WITH SPRAY TIP

    Pfizer

    PAA108466

    Manufactured by: GenTrac, Incorporated,
    Middleton, Wisconsin 53562
    Distributed by Pfizer Inc,
    New York, NY 10017
    US License No. 977

    PRINCIPAL DISPLAY PANEL - 20,000 IU Syringe Spray Kit Tray
  • PRINCIPAL DISPLAY PANEL - 20,000 IU Syringe Spray Kit Carton

    FOR TOPICAL USE ONLY – DO NOT INJECT

    THROMBIN, TOPICAL (BOVINE), U.S.P.
    THROMBIN-JMI®

    NDC: 60793-217-22

    20,000 International Units

    CONTAINS NO PRESERVATIVE
    STORE AT 2-25°C (36-77°F)
    SEE PACKAGE INSERT FOR COMPLETE DIRECTIONS
    NOT MADE WITH NATURAL RUBBER LATEX.

    Rx Only

    SYRINGE SPRAY KIT
    CONTENTS – STERILE UNLESS TRAY IS OPENED OR DAMAGED:

    ONE VIAL 20,000
    UNITS THROMBIN

    ONE VIAL
    20 mL DILUENT

    ONE TRANSFER
    DEVICE

    ONE STERILE DISPOSABLE SYRINGE
    WITH SPRAY TIP

    Pfizer

    PRINCIPAL DISPLAY PANEL - 20,000 IU Syringe Spray Kit Carton
  • PRINCIPAL DISPLAY PANEL - 5,000 IU Syringe Spray Kit Tray

    FOR TOPICAL USE ONLY – DO NOT INJECT

    NDC: 60793-705-05

    THROMBIN, TOPICAL (BOVINE), U.S.P.
    THROMBIN-JMI®

    5,000 International Units

    CONTAINS NO PRESERVATIVE
    STORE AT 2-25°C (36-77°F)
    SEE PACKAGE INSERT FOR COMPLETE DIRECTIONS
    NOT MADE WITH NATURAL RUBBER LATEX.

    Rx Only

    SYRINGE SPRAY KIT
    CONTENTS – STERILE UNLESS TRAY IS OPENED OR DAMAGED:

    ONE VIAL 5,000
    UNITS THROMBIN

    ONE VIAL
    5 mL DILUENT

    ONE TRANSFER
    DEVICE

    ONE STERILE DISPOSABLE SYRINGE
    WITH SPRAY TIP

    Pfizer

    PAA108453

    Manufactured by: GenTrac, Incorporated,
    Middleton, Wisconsin 53562
    Distributed by Pfizer Inc,
    New York, NY 10017
    US License No. 977

    PRINCIPAL DISPLAY PANEL - 5,000 IU Syringe Spray Kit Tray
  • PRINCIPAL DISPLAY PANEL - 5,000 IU Syringe Spray Kit Carton

    FOR TOPICAL USE ONLY – DO NOT INJECT

    THROMBIN, TOPICAL (BOVINE), U.S.P.
    THROMBIN-JMI®

    NDC: 60793-705-05

    5,000 International Units

    CONTAINS NO PRESERVATIVE
    STORE AT 2-25°C (36-77°F)
    SEE PACKAGE INSERT FOR COMPLETE DIRECTIONS
    NOT MADE WITH NATURAL RUBBER LATEX.

    Rx Only

    SYRINGE SPRAY KIT
    CONTENTS – STERILE UNLESS TRAY IS OPENED OR DAMAGED:

    ONE VIAL 5,000
    UNITS THROMBIN

    ONE VIAL
    5 mL DILUENT

    ONE TRANSFER
    DEVICE

    ONE STERILE DISPOSABLE SYRINGE
    WITH SPRAY TIP*

    * For use of Thrombin-JMI Thrombin solution with GEL-FLOW™ NT, discard spray tip and use Thrombin-JMI Thrombin solution syringe according to the directions for use in
    the GEL-FLOW™ NT package insert.

    Pfizer

    PRINCIPAL DISPLAY PANEL - 5,000 IU Syringe Spray Kit Carton
  • PRINCIPAL DISPLAY PANEL - 5,000 IU Epistaxis Kit Tray

    FOR TOPICAL USE ONLY – DO NOT INJECT

    NDC: 60793-205-05

    THROMBIN, TOPICAL (BOVINE), U.S.P.
    THROMBIN-JMI®

    5,000 International Units

    CONTAINS NO PRESERVATIVE
    STORE AT 2-25°C (36-77°F)
    SEE PACKAGE INSERT FOR COMPLETE DIRECTIONS
    NOT MADE WITH NATURAL RUBBER LATEX.

    Rx Only

    EPISTAXIS KIT
    CONTENTS – STERILE UNLESS TRAY IS OPENED OR DAMAGED:

    ONE VIAL 5,000
    UNITS THROMBIN

    ONE VIAL
    5 mL DILUENT

    ONE TRANSFER
    DEVICE

    ONE STERILE DISPOSABLE SYRINGE
    WITH NASAL DRUG DELIVERY DEVICE

    Pfizer

    PAA108463

    Manufactured by: GenTrac, Incorporated,
    Middleton, Wisconsin 53562
    Distributed by Pfizer Inc,
    New York, NY 10017
    US License No. 977

    PRINCIPAL DISPLAY PANEL - 5,000 IU Epistaxis Kit Tray
  • PRINCIPAL DISPLAY PANEL - 5,000 IU Epistaxis Kit Carton

    FOR TOPICAL USE ONLY – DO NOT INJECT

    THROMBIN, TOPICAL (BOVINE), U.S.P.
    THROMBIN-JMI®

    NDC: 60793-205-05

    5,000 International Units

    CONTAINS NO PRESERVATIVE
    STORE AT 2-25°C (36-77°F)
    SEE PACKAGE INSERT FOR COMPLETE DIRECTIONS
    NOT MADE WITH NATURAL RUBBER LATEX.

    Rx Only

    EPISTAXIS KIT
    CONTENTS – STERILE UNLESS TRAY IS OPENED OR DAMAGED:

    ONE VIAL 5,000
    UNITS THROMBIN

    ONE VIAL
    5 mL DILUENT

    ONE TRANSFER
    DEVICE

    ONE STERILE DISPOSABLE SYRINGE
    WITH NASAL DRUG DELIVERY DEVICE

    Pfizer

    PRINCIPAL DISPLAY PANEL - 5,000 IU Epistaxis Kit Carton
  • INGREDIENTS AND APPEARANCE
    THROMBIN-JMI 
    thrombin, topical (bovine) kit
    Product Information
    Product TypePLASMA DERIVATIVEItem Code (Source)NDC: 60793-215
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC: 60793-215-051 in 1 CARTON
    Quantity of Parts
    Part #Package QuantityTotal Product Quantity
    Part 11 VIAL, GLASS 5 mL
    Part 21 VIAL, GLASS 5 mL
    Part 1 of 2
    THROMBIN-JMI 
    thrombin, topical (bovine) solution
    Product Information
    Item Code (Source)NDC: 60793-315
    Route of AdministrationTOPICAL
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    THROMBIN (UNII: 25ADE2236L) (THROMBIN - UNII:25ADE2236L) THROMBIN5000 [iU]  in 5 mL
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC: 60793-315-015 mL in 1 VIAL, GLASS; Type 3: Prefilled Biologic Delivery Device/System (syringe, patch, etc.)
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    BLABLA10286502/24/1995
    Part 2 of 2
    SODIUM CHLORIDE 
    sodium chloride solution
    Product Information
    Route of AdministrationTOPICAL
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    15 mL in 1 VIAL, GLASS; Type 3: Prefilled Biologic Delivery Device/System (syringe, patch, etc.)
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    BLABLA10286502/24/1995
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    BLABLA10286502/24/1995
    THROMBIN-JMI 
    thrombin, topical (bovine) kit
    Product Information
    Product TypePLASMA DERIVATIVEItem Code (Source)NDC: 60793-217
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC: 60793-217-201 in 1 CARTON
    2NDC: 60793-217-211 in 1 CARTON
    3NDC: 60793-217-221 in 1 CARTON
    Quantity of Parts
    Part #Package QuantityTotal Product Quantity
    Part 11 VIAL, GLASS 20 mL
    Part 21 VIAL, GLASS 20 mL
    Part 1 of 2
    THROMBIN-JMI 
    thrombin, topical (bovine) solution
    Product Information
    Item Code (Source)NDC: 60793-317
    Route of AdministrationTOPICAL
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    THROMBIN (UNII: 25ADE2236L) (THROMBIN - UNII:25ADE2236L) THROMBIN20000 [iU]  in 20 mL
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC: 60793-317-0120 mL in 1 VIAL, GLASS; Type 3: Prefilled Biologic Delivery Device/System (syringe, patch, etc.)
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    BLABLA10286502/24/1995
    Part 2 of 2
    SODIUM CHLORIDE 
    sodium chloride solution
    Product Information
    Route of AdministrationTOPICAL
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    120 mL in 1 VIAL, GLASS; Type 3: Prefilled Biologic Delivery Device/System (syringe, patch, etc.)
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    BLABLA10286502/24/1995
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    BLABLA10286502/24/1995
    THROMBIN-JMI 
    thrombin, topical (bovine) kit
    Product Information
    Product TypePLASMA DERIVATIVEItem Code (Source)NDC: 60793-705
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC: 60793-705-051 in 1 CARTON
    Quantity of Parts
    Part #Package QuantityTotal Product Quantity
    Part 11 VIAL, GLASS 5 mL
    Part 21 VIAL, GLASS 5 mL
    Part 1 of 2
    THROMBIN-JMI 
    thrombin, topical (bovine) solution
    Product Information
    Route of AdministrationTOPICAL
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    THROMBIN (UNII: 25ADE2236L) (THROMBIN - UNII:25ADE2236L) THROMBIN5000 [iU]  in 5 mL
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    15 mL in 1 VIAL, GLASS; Type 3: Prefilled Biologic Delivery Device/System (syringe, patch, etc.)
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    BLABLA10286502/24/1995
    Part 2 of 2
    SODIUM CHLORIDE 
    sodium chloride solution
    Product Information
    Route of AdministrationTOPICAL
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    15 mL in 1 VIAL, GLASS; Type 3: Prefilled Biologic Delivery Device/System (syringe, patch, etc.)
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    BLABLA10286502/24/1995
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    BLABLA10286502/24/1995
    THROMBIN-JMI 
    thrombin, topical (bovine) kit
    Product Information
    Product TypePLASMA DERIVATIVEItem Code (Source)NDC: 60793-205
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC: 60793-205-051 in 1 CARTON
    Quantity of Parts
    Part #Package QuantityTotal Product Quantity
    Part 11 VIAL, GLASS 5 mL
    Part 21 VIAL, GLASS 5 mL
    Part 1 of 2
    THROMBIN-JMI 
    thrombin, topical (bovine) solution
    Product Information
    Route of AdministrationTOPICAL
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    THROMBIN (UNII: 25ADE2236L) (THROMBIN - UNII:25ADE2236L) THROMBIN5000 [iU]  in 5 mL
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    15 mL in 1 VIAL, GLASS; Type 3: Prefilled Biologic Delivery Device/System (syringe, patch, etc.)
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    BLABLA10286502/24/1995
    Part 2 of 2
    SODIUM CHLORIDE 
    sodium chloride solution
    Product Information
    Route of AdministrationTOPICAL
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    15 mL in 1 VIAL, GLASS; Type 3: Prefilled Biologic Delivery Device/System (syringe, patch, etc.)
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    BLABLA10286502/24/1995
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    BLABLA10286502/24/1995
    Labeler - Pfizer Laboratories Div Pfizer Inc (134489525)
    Establishment
    NameAddressID/FEIBusiness Operations
    GenTrac, Inc.058521017MANUFACTURE(60793-205, 60793-215, 60793-217, 60793-705)
    Establishment
    NameAddressID/FEIBusiness Operations
    Pharmacia and Upjohn Company LLC618054084MANUFACTURE(60793-205, 60793-215, 60793-217, 60793-705)

  • Trademark Results [THROMBIN-JMI]

    Mark Image

    Registration | Serial
    Company
    Trademark
    Application Date
    THROMBIN-JMI
    THROMBIN-JMI
    78468722 not registered Dead/Abandoned
    King Pharmaceuticals, Inc.
    2004-08-17
    THROMBIN-JMI
    THROMBIN-JMI
    74650513 2044605 Live/Registered
    KING PHARMACEUTICALS RESEARCH AND DEVELOPMENT, LLC
    1995-03-23

    © 2024 FDA.report
    This site is not affiliated with or endorsed by the FDA.