Oxygen by Linde Gas & Equipment Inc. OXYGEN- oxygen gas

Oxygen by

Drug Labeling and Warnings

Oxygen by is a Prescription medication manufactured, distributed, or labeled by Linde Gas & Equipment Inc.. Drug facts, warnings, and ingredients follow.

Drug Details [pdf]

WARNINGS SECTION

WARNING: For emergency use only when administered by properly trained personnel for oxygen deficiency and resuscitation. For all other medical applications, Rx only.

Uninterrupted use of high concentrations of oxygen over a long duration, without monitoring its effect on oxygen content of arterial blood, may be harmful. Do not attempt to use on patients who have stopped breathing unless used in conjunction with resuscitative equipment. Patient monitoring is recommended for patient receiving supplemental oxygen. Flow rates for this product are approximate. Federal law restricts this device to sale by or on the order of a physician.

Keep out of reach and sight of children.

Federal law requires that this container be refilled with Oxygen USP only by establishments registered as a drug manufacturer in accordance with the Federal Food, Drug, and Cosmetic Act.

Note: Keep valve minimum 12 inches (30cm) away from magnet opening. Do not move the package during MRI scan, as the MR data quality may be degraded.

Un-Coded Section

MR
MR CONDITIONAL
Static Field Strength 3.0T
Static Field Gradient 375 Gauss/cm

Instructions for use
-Operating temperature -4°F to 113°F (-20°C to +45°C)
-Only use with devices intended for the product administration.
-Prepare to change the cylinder when the pointer on the gauge enters the red area.
-to ensure the correct, prescribed flow rate, always make sure that the flow selector is positioned on a numbered flow setting, not between flow settings.


1) Pressure outlet (if provided)
2) Shut-off valve
3) Gauge
4) Flow outlet
5) Flow selector

Before Use:
>Check gauge (3) for content.
>Check flow selector (5) is set at zero.
>Connect equipment to outlet (1 or 4).
>Slowly open shut off valve (2) fully by turning counterclockwise.
>If equipment is connected to the flow outlet (4) select flow by turning flow selector (5) stepwise up through flow settings.
The patient can now be connected to a delivery device.

After Use:
>Turn flow selector (5) to zero by turning the flow selector stepwise down through flow settings.
>Close shut off valve (2) by turning clockwise.
>Vent downstream equipment.
>Disconnect the equipment from the outlet (1 or 4).
 

Batch:


DO NOT REMOVE THIS LABEL


LG015C

 

PACKAGE LABEL.PRINCIPAL DISPLAY PANEL     

Linde
OXYGEN, COMPRESSED USP UN1072

Produced By Air Liquefaction

CAS 7782-44-7

Distributed by:
Linde Gas North America LLC
200 Somerset Corporate Blvd., Suite 7000
Bridgewater, NJ 08807
866.543.3427

OXYGEN 2

MEDICAL GAS

WARNING: For emergency use only when administered by properly trained personnel for oxygen deficiency and resuscitation. For all other medical applications, Rx only.

Uninterrupted use of high concentrations of oxygen over a long duration, without monitoring its effects on oxygen content of arterial blood, may be harmful. Do not attempt to use on patients who have stopped breathing unless used in conjunction with resuscitative equipment. Federal law requires that this container be refilled with Oxygen USP only by establishments registered as a drug manufacturer in accordance with the Federal Food, Drug, and Cosmetic Act.

DANGER:
KEEP OUT OF REACH OF CHILDREN.
MAY CAUSE OR INTENSIFY FIRE: OXIDIZER
CONTAINS GAS UNDER PRESSURE: MAY EXPLODE IF HEATED.

Do not handle until all safety precautions have been read and understood. Keep and store away from clothing and other combustible materials. Keep valves and fittings free from grease and oil. Use and store only outdoors or in a well-ventilated place. In case of fire: Stop leak if safe to do so. Use a back flow preventive device in the piping. Use only with equipment of compatible materials of construction and rated for cylinder pressure. Use only with equipment cleaned for oxygen service. Open valve slowly. Close valve after each use and when empty. Protect from sunlight when ambient temperature exceeds 52°C (125°F). Read and follow the Safety Data Sheet (SDS) before use.

DO NOT REMOVE THIS LABEL.

CONTENTS:

Cylinder; Type	Liters
T	8584	[_]
H	6322	[_]
K	6322	[_]
M	3172	[_]
F	1567	[_]
E	680	[_]
DD	588	[_]
D	413	[_]
C	248	[_]
BB	147	[_]
B	147	[_]
AA	103	[_]
AAA	39	[_]
M-7	196	[_]

LG010G

Linde
OXYGEN, COMPRESSED USP

UN1072

Produced by Air Liquefaction

CAS 7782-44-7

DO NOT REMOVE THIS PRODUCT LABEL.

OXYGEN 2
LG011G

MEDICAL GAS

WARNING: For emergency use only when administered by properly trained personnel for oxygen deficiency and resuscitation. For all other medical applications, Rx only. Uninterrupted use of high concentrations of oxygen over a long duration, without monitoring its effects on oxygen content or arterial blood, may be harmful. Do not attempt to use on patients who have stopped breathing unless used in conjunction with resuscitative equipment.

DANGER: MAY CAUSE OR INTENSIFY FIRE; OXIDIZER. CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED. Do not handle until all safety precautions have been read and understood. Keep and store away from clothing and other combustible materials. Keep valves and fittings free from grease and oil. Use an store only outdoors or in a well-ventilated place. In case of fire: Stop leak if safe to do so. Use a back flow preventive device in the piping. Use only with equipment of compatible materials of construction and rated for cylinder pressure. Use only with equipment cleaned for oxygen service. Open valve slowly. Close valve after each use and when empty. Protect from sunlight when ambient temperature exceeds 52°C (125°F). Read and follow the Safety Data Sheet (SDS) before use.  

Distributed by: 
Linde Gas North America LLC
200 Somerset Corporate Blvd., Suite 7000
Bridgewater, NJ 08807
866.543.3427

CONTENTS:

Cylinder; Type		Liters
T	[_]	8584
H	[_]	6322
K	[_]	6322
M	[_]	3172
____	____	____

MR CONDITIONAL
Static Field Strength ≤ 3.0T
Spatial Gradient Field ≤ 100 gauss/cm

OXYGEN, COMPRESSED
USP
UN1072
CAS 7782-44-7
Produced by Air Liquefaction.

Distributed by:
Linde Gas North America, LLC
200 Somerset Corporate Blvd., Suite 7000
Bridgewater, NJ 08807
866.513.3427

CONTENTS:
Cylinder Type		Liters	NDC
E	[_]	680	25373-001-10
D	[_]	413	25373-001-01

No user-serviceable parts. Return to distributor for service/repair. MR conditional void if user-serviced.

No user transfill. Return to distributer for transfill.

OXYGEN 2

Linde

• ACCURACY: ±20%: 1, 1.5, 2 lpm
• FOR MRI: derate by -3.5% at 1.5T

MR CONDITIONAL
Static Field Strength ≤ 3.0T
Spatial Gradient Field ≤ 100 gauss/cm

INDICATIONS FOR USE: Intended to provide supplemental oxygen to adults, MRI safe, MRI-compatible, and intended for use during MRI imaging for MRI systems up to 3.0T. For emergency use only when administered by properly trained personnel for oxygen deficiency and resuscitation. For all other medical applications, Rx only.

WARNING: For emergency use only when administered by properly trained personnel for oxygen deficiency and resuscitation. For all other medical applications, Rx only. Uninterrupted use of high concentrations of oxygen over a long duration, without monitoring its effect on oxygen content of arterial blood, may be harmful. Do not attempt to use on patients who have stopped breathing unless used in conjunction with resuscitative equipment. Keep out of reach of children. Federal law requires that this container be refilled with Oxygen USP only by establishments registered as a drug manufacturer in accordance with the Federal Food, Drug, and Cosmetic Act. DANGER: MAY CAUSE OR INTENSIFY FIRE; OXIDIZER. CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED. Do not handle until all safety precautions have been read and understood. Keep and store away from clothing and other combustible materials. Keep valves and fittings free from grease and oil. Use and store only outdoors or in a well-ventilated place. In case of fire: Stop leak if safe to do so. Use a back flow preventive device in the piping. Use only with equipment of compatible materials of construction and rated for cylinder pressure. Use only with equipment cleaned for oxygen service. Open valve slowly. Close valve after each use and when empty. Protect from sunlight when the ambient temperature exceeds 52°C (125°F). Read and follow the Safety Data Sheet (SDS) before use.

DO NOT REMOVE THIS LABEL.

MRI
CAUTION
≤ 3.0T
≤ 100 G/cm

NOTICE
-Open valve slowly. Close after each use.


-Environmental specifications for handling, storage, transport, and operating conditions: -20 to 125°F (-29 to 52°C).

LG013G

THE LINDE GROUP
Linde

OXYGEN,
COMPRESSED
USP

OXYGEN
2

UN1072
CAS: 7782-44-7

Produced by Air Liquefaction
Oxygen (O2) 100%
under 2000 psi pressure (59°F or 15°C)

CONTENTS:

Cylinder type:		Liters	NDC
E	[_]	680	25373-001-10
D	[_]	413	25373-001-01

Service and transfill:
No user-serviceable parts. Return to distributor for service/repair. MRI safe and MRI compatible void if user-serviced. No user transfill. Return to distributor for transfill.


Distributed by:
Linde Gas North America LLC
200 Somerset Corporate Blvd., Suite 7000
Bridgewater, NJ 08807
866.543.3427

MR
MR CONDITIONAL


Static Field Strength 3.0T
Static Field Gradient 375 Gauss/cm

LIV® Linde Integrated Valve Portable oxygen system.


INDICATIONS FOR USE:
The LIV® is an integrated portable oxygen delivery system intended to provide supplemental oxygen to pediatrics and adults. The device is MR-conditional (per ASTM standard 2503-05), and intended for use during MR imaging for MRI systems up to 3.0T.


Rx only. Compressed gas cylinders in service or in storage shall be stabilized or otherwise secured to prevent falling or rolling.

DANGER: MAY CAUSE OR INTENSIFY FIRE; OXIDIZER. CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED.

Do not handle until all safety precautions have been read and understood. Keep and store away from clothing and other combustible materials. Keep valves and fittings free from grease and oil. Use and store only outdoors or in a well-ventilated place. In case of fire: Stop leak if safe to do so. Use a back flow preventive device in the piping. Use only with equipment of compatible materials of construction and rated for cylinder pressure. Use only with equipment cleaned for oxygen service. Open valve slowly. Close valve after each use and when empty. Protect from sunlight when ambient temperature exceeds 52°C (125°F). Read and follow the Safety Data Sheet (SDS) before use.

PACKAGE LABEL.PRINCIPAL DISPLAY PANEL

LINDE


MEDICAL GAS

THE LINDE GROUP
Linde

OXYGEN,
COMPRESSED
USP

OXYGEN
2

UN1072
CAS: 7782-44-7

Produced by Air Liquefaction
Oxygen (O2) 100%
under 3000 psi pressure (59°F or 15°C)

CONTENTS:

Cylinder Type		Liters	NDC
E	[_]	1004	25373-001-15
D	[_]	618	25373-001-16

Service and transfill:
No user-serviceable parts. Return to distributor for service/repair. MRI safe and MRI compatible void if user-serviced. No user transfill. Return to distributor for transfill.


Distributed by:
Linde Gas North America LLC
200 Somerset Corporate Blvd., Suite 7000
Bridgewater, NJ 08807
866.543.3427

MR
MR CONDITIONAL


Static Field Strength 3.0T
Static Field Gradient 375 Gauss/cm

LIV®

INDICATIONS FOR USE:
The LIV® is an integrated portable oxygen delivery system intended to provide supplemental oxygen to pediatrics and adults. The device is MR-conditional (per ASTM standard 2503-05), and intended for use during MR imaging for MRI systems up to 3.0T.


Rx only. Compressed gas cylinders in service or in storage shall be stabilized or otherwise secured to prevent falling or rolling.

DANGER: MAY CAUSE OR INTENSIFY FIRE; OXIDIZER. CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED.

Do not handle until all safety precautions have been read and understood. Keep and store away from clothing and other combustible materials. Keep valves and fittings free from grease and oil. Use and store only outdoors or in a well-ventilated place. In case of fire: Stop leak if safe to do so. Use a back flow preventive device in the piping. Use only with equipment of compatible materials of construction and rated for cylinder pressure. Use only with equipment cleaned for oxygen service. Open valve slowly. Close valve after each use and when empty. Protect from sunlight when ambient temperature exceeds 52°C (125°F). Read and follow the Safety Data Sheet (SDS) before use.

WARNING: For emergency use only when administered by properly trained personnel for oxygen deficiency and resuscitation. For all other medical applications, Rx only.

Uninterrupted use of high concentrations of oxygen over a long duration, without monitoring its effect on oxygen content of arterial blood, may be harmful. Do not attempt to use on patients who have stopped breathing unless used in conjunction with resuscitative equipment. Patient monitoring is recommended for patient receiving supplemental oxygen. Flow rates for this product are approximate. Federal law restricts this device to sale by or on the order of a physician.

Keep out of reach and sight of children.

Federal law requires that this container be refilled with Oxygen USP only by establishments registered as a drug manufacturer in accordance with the Federal Food, Drug, and Cosmetic Act.

Note: Keep valve minimum 12 inches (30cm) away from magnet opening. Do not move the package during MRI scan, as the MR data quality may be degraded.

DO NOT REMOVE THIS LABEL

MR
MR CONDITIONAL
Static Field Strength 3.0T
Static Field Gradient 375 Gauss/cm

Instructions for use
-Operating temperature -4°F to 113°F (-20°C to +45°C)
-Only use with devices intended for the product administration.
-Prepare to change the cylinder when the pointer on the gauge enters the red area.
-to ensure the correct, prescribed flow rate, always make sure that the flow selector is positioned on a numbered flow setting, not between flow settings.


1) Pressure outlet (if provided)
2) Shut-off valve
3) Gauge
4) Flow outlet
5) Flow selector

Before Use:
>Check gauge (3) for content.
>Check flow selector (5) is set at zero.
>Connect equipment to outlet (1 or 4).
>Slowly open shut off valve (2) fully by turning counterclockwise.
>If equipment is connected to the flow outlet (4) select flow by turning flow selector (5) stepwise up through flow settings.
The patient can now be connected to a delivery device.

After Use:
>Turn flow selector (5) to zero by turning the flow selector stepwise down through flow settings.
>Close shut off valve (2) by turning clockwise.
>Vent downstream equipment.
>Disconnect the equipment from the outlet (1 or 4).
 

Batch:


LG016B

THE LINDE GROUP
Linde

OXYGEN,
COMPRESSED
USP

OXYGEN
2

UN1072
CAS: 7782-44-7

Produced by Air Liquefaction
Oxygen (O2) 100%
under 2000 psi pressure (59°F or 15°C)

CONTENTS:

Cylinder type:		Liters	NDC
E	[_]	680	25373-001-10
D	[_]	413	25373-001-01

Service and transfill:
No user-serviceable parts. Return to distributor for service/repair. MRI safe and MRI compatible void if user-serviced. No user transfill. Return to distributor for transfill.
Federal law requires that this container be refilled with oxygen USP only by establishments registered as a drug manufacturer in accordance with the Federal Food, Drug, and Cosmetic Act.

DO NOT REMOVE THIS LABEL


Distributed by:
Linde Gas North America LLC
200 Somerset Corporate Blvd., Suite 7000
Bridgewater, NJ 08807
866.543.3427

Note: Keep valve minimum 12 inches (30 cm) away from magnet opening. Do not move the package during MRI scan, as the MR data quality may be degraded.


MR
MR CONDITIONAL
Static Field Strength 3.0T
Static Field Gradient 375 Gauss/cm

LIV®IQ Linde Integrated Valve Portable oxygen system

INDICATIONS FOR USE:
The LIV®IQ is an integrated portable oxygen delivery system intended to provide supplemental oxygen to pediatrics and adults. The device is MR-conditional (per ASTM standard 2503-05), and intended for use during MR imaging for MRI systems up to 3.0T.


Rx only. Compressed gas cylinders in service or in storage shall be stabilized or otherwise secured to prevent falling or rolling.

DANGER: MAY CAUSE OR INTENSIFY FIRE; OXIDIZER. CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED.

Do not handle until all safety precautions have been read and understood. Keep and store away from clothing and other combustible materials. Keep valves and fittings free from grease and oil. Use and store only outdoors or in a well-ventilated place. In case of fire: Stop leak if safe to do so. Use a back flow preventive device in the piping. Use only with equipment of compatible materials of construction and rated for cylinder pressure. Use only with equipment cleaned for oxygen service. Open valve slowly. Close valve after each use and when empty. Protect from sunlight when ambient temperature exceeds 52°C (125°F). Read and follow the Safety Data Sheet (SDS) before use.

WARNING: For emergency use only when administered by properly trained personnel for oxygen deficiency and resuscitation. For all other medical applications, Rx only.

Uninterrupted use of high concentrations of oxygen over a long duration, without monitoring its effect on oxygen content of arterial blood, may be harmful. Do not attempt to use on patients who have stopped breathing unless used in conjunction with resuscitative equipment. Patient monitoring is recommended for patient receiving supplemental oxygen. Flow rates for this product are approximate. Federal law restricts this device to sale by or on the order of a physician.

Keep out of reach and sight of children.

Download the full user guide at: www.liv-iq.com or scan with your smart phone:



Guide to Digital Display
Selected Flow
Flow is active
New, full cylinder
Therapy time remaining at selected flow setting
Remaining gas volume, shown 3/4 full
Mute button

If there are no lines or numbers around the content indicator, do not use the product.

MR
MR CONDITIONAL
Static Field Strength 3.0T
Static Field Gradient 375 Gauss/cm

Instructions for use
-Operating temperature -4°F to 113°F (-20°C to +45°C)
-Only use with devices intended for the product administration.
-Prepare to change the cylinder when the pointer on the gauge enters the red area.
-to ensure the correct, prescribed flow rate, always make sure that the flow selector is positioned on a numbered flow setting, not between flow settings.


1) Pressure outlet (if provided)
2) Shut-off valve
3) Flow selector
4) Flow outlet
5) Digital display
Mute button

Before Use:
>Check digital display (5) for content.
>Check flow selector (3) is set at zero.
>Connect equipment to outlet (1 or 4).
>Slowly open shut off valve (2) slowly to "ON".
>Turn the flow selector (3) to the desired flow.

The patient can now be connected to a delivery device.

After Use:
>Remove the delivery device from the patient.
>Turn flow selector (3) to zero.
>Turn the shut off valve (2) to "OFF".
>Turn the flow selector (3) to a high flow to vent.
>Turn the flow selector (3) back to zero.
>Disconnect the delivery device from outlet (1 or 4).

-Using both outlets at the same time is not recommended and may cause a "HI FLO" alarm. To silence the alarm and continue, press and hold the mute button for 3 seconds.
-The mute button can silence any alarm for 1 minute (short press) or permanently (press & hold for 3 seconds).
 

Set flow selector to zero before opening shut-off valve.

Blocked tube/Low flow


Has the Mute button been pressed?
Yes: An active alarm has been muted.
No: Due to a rapid change in temperature, the low flow or high flow alert is temporarily disabled.


Batch:



LGIQ015B

INGREDIENTS AND APPEARANCE

OXYGEN  
oxygen gas

Product Information
Product Type	HUMAN PRESCRIPTION DRUG	Item Code (Source)	NDC: 25373-001
Route of Administration	RESPIRATORY (INHALATION)

Active Ingredient/Active Moiety
Ingredient Name	Basis of Strength	Strength
Oxygen (UNII: S88TT14065) (Oxygen - UNII:S88TT14065)	Oxygen	99 L  in 100 L

Packaging
#	Item Code	Package Description	Marketing Start Date	Marketing End Date
1	NDC: 25373-001-01	413 L in 1 CYLINDER; Type 0: Not a Combination Product	11/19/1990
2	NDC: 25373-001-02	640 L in 1 CYLINDER; Type 0: Not a Combination Product	11/19/1990
3	NDC: 25373-001-03	6452 L in 1 CYLINDER; Type 0: Not a Combination Product	11/19/1990
4	NDC: 25373-001-04	34 L in 1 CYLINDER; Type 0: Not a Combination Product	11/19/1990
5	NDC: 25373-001-05	113 L in 1 CYLINDER; Type 0: Not a Combination Product	11/19/1990
6	NDC: 25373-001-06	170 L in 1 CYLINDER; Type 0: Not a Combination Product	11/19/1990
7	NDC: 25373-001-07	170 L in 1 CYLINDER; Type 0: Not a Combination Product	11/19/1990
8	NDC: 25373-001-08	196 L in 1 CYLINDER; Type 0: Not a Combination Product	11/19/1990
9	NDC: 25373-001-09	248 L in 1 CYLINDER; Type 0: Not a Combination Product	11/19/1990
10	NDC: 25373-001-10	680 L in 1 CYLINDER; Type 0: Not a Combination Product	11/19/1990
11	NDC: 25373-001-17	1567 L in 1 CYLINDER; Type 0: Not a Combination Product	11/19/1990
12	NDC: 25373-001-18	3172 L in 1 CYLINDER; Type 0: Not a Combination Product	11/19/1990
13	NDC: 25373-001-19	6322 L in 1 CYLINDER; Type 0: Not a Combination Product	11/19/1990
14	NDC: 25373-001-20	8584 L in 1 CYLINDER; Type 0: Not a Combination Product	11/19/1990
15	NDC: 25373-001-15	1004 L in 1 CYLINDER; Type 0: Not a Combination Product	11/19/1990
16	NDC: 25373-001-16	618 L in 1 CYLINDER; Type 0: Not a Combination Product	11/19/1990

Marketing Information
Marketing Category	Application Number or Monograph Citation	Marketing Start Date	Marketing End Date
unapproved medical gas		11/19/1990

Labeler - Linde Gas North America LLC (805568339)

Registrant - Linde Gas North America LLC (805568339)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		010263301	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		016271697	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		833132561	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		143956550	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		941118262	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		145259227	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		069239874	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		960788508	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		784579190	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		016300933	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		164139060	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		026921048	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		155946564	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		129012352	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		142591424	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		833119261	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		172749546	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		624186131	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		168248081	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		067906953	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		789082976	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		149324605	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		833120244	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		805342578	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		833120426	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		166471248	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		555579254	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		833120723	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		153448761	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		134971428	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		167911036	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		839176356	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		069232473	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		142984488	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		160443631	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		833132108	MANUFACTURE(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		080006834	manufacture(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		080428087	manufacture(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		080428082	manufacture(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		019551467	manufacture(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		080583547	manufacture(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		078372738	manufacture(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		181444840	manufacture(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		190750658	manufacture(25373-001)

Establishment
Name	Address	ID/FEI	Business Operations
Linde Gas North America LLC		805823411	manufacture(25373-001)