Teat-Kote 10/III AMS by is a Animal medication manufactured, distributed, or labeled by GEA Farm Technologies, Inc., GEA Farm Technologies, Inc. Drug facts, warnings, and ingredients follow.
FIRST AID:
If in Eyes: Flush with large volumes of water for at least 15 minutes. Call a physician immediately.
If Swallowed: DO NOT induce vomiting. Rinse mouth promptly, then give small amount/glass of water (4-6 oz. child / 10-12 oz. adult). Avoid alcohol. Call a physician immediately. DO NOT give anything by mouth to an unconscious or convulsing person.
If on Skin: Flush with large volumes of water for at least 15 minutes while removing contaminated clothing and shoes. If irritation develops and persists, get medical attention.
Inhalation of Vapors: If breathing difficulty or irritation occurs, remove to fresh air. If symptoms persist, get medical attention.
FOR ASSISTANCE WITH MEDICAL EMERGENCY
CALL 1-877-741-1032
DIRECTIONS FOR USE: Use at full strength. Do not dilute.
POST-DIPPING USING AUTOMATED MILKING SYSTEM (AMS): Immediately after milking, Teat-Kote 10/III AMS is applied to each teat using GEA Automated Milking System (AMS) post-milking procedure. Refer to the equipment manual as GEA Automated Milking Systems differ.
PRE-DIPPING INSTRUCTION USING DIP CUP STANDARD APPLICATION: Before milking, dip each teat with Teat-Kote 10/III AMS. After 15 to 30 seconds, dry each treat thoroughly with a single service towel. If the udder and teats are heavily soiled, wash with a sanitizing solution and dry before application of Teat-Kote 10/III AMS.
POST-DIPPINGUSING DIP CUP STANDARD APPLICATION: Immediately after milking, dip each teat with Teat-Kote 10/III AMS. Allow teats to air dry. Do not wipe. If outside temperature is below freezing, allow to air dry on the teat before the cow leaves the parlor to prevent freezing. At the end of lactation, apply this product daily for one week after the last milking. In addition, begin application of this product about one week prior to calving.
If a common teat dip cup is used for application, a fresh solution should always be used at each milking. The teat dip cup should be emptied, cleaned and rinsed with potable waterafter each milking session or when cup becomes contaminated during milking. Do not pour remaining solutionfrom dip cup back into original container.
TEAT-KOTE 10/III AMS
sanitizing teat dip with added emollient liquid |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
Labeler - GEA Farm Technologies, Inc. (018037309) |
Registrant - GEA Farm Technologies, Inc (018037309) |
Establishment | |||
Name | Address | ID/FEI | Business Operations |
---|---|---|---|
GEA Farm Technologies, Inc. | 018037309 | api manufacture, manufacture |