To ensure full fluorescence and patient comfort, the GloStrip ® impregnated tip should be moistened with one or two drops of sterile, isotonic saline or irrigating solution before application. Touch conjunctiva or fornix as required with moistened tip. It is recommended that the patient blink several times after application.
Fluorescein Sodium Ophthalmic Strips U.S.P. diagnostic agent is for professional use only
Each strip is impregnated with 0.6 mg of fluorescein sodium USP.
INDICATIONS
INDICATIONS & USAGE SECTION
For staining the anterior segment of the eye in disclosing corneal injury, in applanation tonometry and when fitting contact lenses.
DIRECTIONS FOR USE
DOSAGE FORMS & STRENGTHS SECTION
To ensure full fluorescence and patient comfort, the GloStrip® impregnated tip should be moistened with one or two drops of sterile, isotonic saline or irrigating solution before application.
Touch conjunctiva or fornix as required with moistened tip. It is recommended that the patient blink several times after application.
HOW SUPPLIED
HOW SUPPLIED SECTION
Carton containing 100 or 300 sterile strips.
INSTRUCTIONS FOR OPENING STERILE GLOSTRIPS®
SPL UNCLASSIFIED SECTION
1.Grasp free tab ends of wrapping and slowly pull apart. When the white paper handle becomes visible, remove the GloStrip® from the envelope.
Figure 1
An Alternate Method of Opening
SPL UNCLASSIFIED SECTION
1.Grasp envelope firmly with two hands as shown in Fig. 2 below. Tear the envelope from both its edges to the strip handle.
Figure 2
2.
Hold the handle end of the GloStrip® with the left hand and the paper envelope without holding the tip with the right hand. See Fig. 3
Figure 3
3.
Separate the envelope at the tear, exposing the GloStrip® tip. See Fig. 4
OpenFDA label data provides additional search and identifier links. DailyMed’s Structured Product Label is the canonical label on FDA.report. Matching records are deduplicated before they are shown below.