Reusable light electrodes for ECG, active surface 314 mm³ and cable length 60 cm. F9029/60 model has features that make it absolutely reliable during signal recording with all different ECG on the market. Cable and metallic recording electrode are very light and can be easily positioned using conductive gel. ECG signal is extremely clear thanks to beryllium of which the electrode is made of. FIAB light electrodes can be tapped to all ECGs and monitors with Ø 4 mm snap cable
A noninvasive electrical conductor designed to conduct electrical signals, generated by a patient's heart, from the skin surface to an electrocardiograph (ECG) monitoring device, via an ECG lead wire (not included). It is typically a disk-like electrode that is affixed to the skin with a special adhesive, or adhesive tape, and a conductive gel (some are pre-gelled), or using a suction mechanism; alternatively, some types may be designed to be attached to hand-held heart rate meters. Electrocardiography (ECG) is usually performed using a set of electrodes (e.g., 12) connected to appropriate leads and cables. This is a reusable device.
fiab.it